Essex · England

Non-slip bath & shower coating in Nayland, Essex

Non-slip bath coating in and around Nayland: photo quotes, tidy work and a year’s guarantee.

  • Bath mats that harbour mould or get forgotten
  • A bath or tray that is slippery when wet
  • Resurfaced baths that are now too smooth
Surface Doctor technician refinishing the outside of a roll-top bath

Book non-slip bath coating in Nayland

What affects the price in Nayland

A fixed quote means you know the cost before booking. We take into account:

  • Previous DIY repairs that have to come out
  • What the surface is made of
  • The colour and finish to match
  • The size and number of damaged areas

A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.

Send photos for a quote

A couple of clear pictures is all it takes. It helps if you send:

  • Whether it’s been repaired or coated before
  • A wider photo showing the entire bath or shower tray
  • What it’s made of, if you know
  • The postcode, so we can plan the visit

Most clients in Nayland get their price from photos. Tell us what happened and where you are, and we’ll reply with a fixed quote and the earliest dates we have.

How we handle non-slip bath coating in Nayland

The coating is clear and textured, so it shows only as a slightly matt area where you stand. It suits older people, families and holiday lets. We work on acrylic baths, shower trays and wet room floors (ask us), and people most often call us about resurfaced baths that are now too smooth and worn-out textured areas.

Every job is backed for twelve months. If something goes wrong with the work, we come back. A soft brush and mild cleaner keep it clean. Do not use abrasive pads on the textured area.

Where
Nayland (CO6)
Region
Essex
Guarantee
12 months on all our work
Quote
Fixed and free, based on photos
Call
0345 017 0787
Updated
23 October 2026
Discoloured square shower tray restored with a new white finish

Where we work around Nayland

Nayland is about 6 miles north of Colchester, in Essex. Across the CO6 area, we carry out the work at your property. We cover 644 places across Essex, from the larger towns to small villages. You can also see our page for London, about 53 miles away.

All of CO6 is covered, from the main roads to the quietest streets. Jobs here include addresses on High Street, Parker's Way and Bear Street. Neighbouring places we cover include Wissington (1 mile west), Cock Street (1 mile north-west), Stoke-by-Nayland (1 mile north-east), Little Horkesley (2 miles south-west) and Leavenheath (2 miles north-west). Further out, we also cover Colchester (6 miles south), Braintree (15 miles south-west), Camulodunum (6 miles south), Halstead (10 miles west), Greenstead (6 miles south-east) and Tiptree (12 miles south-west).

Landmarks near Nayland

Around Nayland, we work in homes near 41 pub, Church of St James and Nayland Primary School, among other places. For rail, the closest station is Bures station, roughly 4.3 miles west. A little further out are Severalls Hospital (3.9 miles south) and Mount Bures (4.3 miles west). The countryside around Nayland includes Arger Fen.

Map of Nayland © OpenStreetMap contributors

Repair or replace: which is better?

The alternatives are a new textured bath or tray, or a bath mat, which traps water and needs cleaning. A coating adds grip to the bath you have. There are no surprise extras on the day. What we quote from your photos is what you pay, and if the damage turns out to be different, we discuss it before starting.

What you get with us

  • We leave the room as we found it
  • Straight answers about what a repair can do
  • Free fixed quotes from pictures
  • Everything repaired in place

Read our full price list.

Work for landlords and builders

If you manage property in Nayland, we’ll quote for several properties at once. Send photos for each one and we will come back with a combined price.

We carry out planned and one-off repairs for housing associations and facilities teams in Essex and across the UK. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.

DIY repairs versus a professional job

If you do try a kit, read the instructions carefully, and give it the full curing time. If it fails, we can still put it right.

A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.

What a repair cannot fix

Not everything can be repaired, and we’ll tell you before we start. We cannot fix:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

If in doubt, send photos and we’ll say what we think.

What we work on

  • Resurfaced baths
  • Shower trays
  • Enamelled baths
  • Acrylic baths
  • Wet room floors (ask us)

Signs you need non-slip bath coating in Nayland

Smooth surfaces are easy to clean, yet with soap and water on them they become slippery. Textured areas on older baths wear smooth too.

Typical reasons for a call-out include:

  • Worn-out textured areas
  • Safety for older or less mobile people
  • Resurfaced baths that are now too smooth
  • Bath mats that harbour mould or get forgotten

Questions to ask before you book

  • Whether the price covers travel
  • What happens if they find more damage
  • Who turns up on the day
  • How the room is protected while they work

Our hiring checklist

How it works

A typical visit goes like this: we arrive at the agreed slot, sheet and mask the area around the job, carry out the work and tidy away. Allow a few hours from start to finish. Before leaving, we tell you how long to leave it and what to avoid for the first few days.

  1. We start by degreasing the area where you stand.
  2. Next we mask off the area.
  3. We put on the clear non-slip coating.
  4. The masking comes off to leave a neat edge.
  5. The coating is left to cure before use, typically overnight.

Getting ready for the visit

  • Let the surface dry out before the visit
  • Let us know which floor the room is on
  • Plan for the room to be out of bounds to pets and children

How to get a price

A quote takes minutes to ask for: take one close-up and one wider shot of the bath or shower tray, include your postcode and send them to us. You’ll get a fixed quote, not an estimate.

Send photos for a quote

Read more

FAQs for Nayland

Can you repair something that’s been repaired before?

Typically, yes. The old repair comes out first, so mention it when you send photos.

I rent my home. Can I book you?

Yes, though it’s best to check with your landlord first. Landlords are often glad to have it sorted.

What happens after I send pictures?

We look at the pictures and reply with a fixed price and some dates. If we need another angle, we will ask.

Are there extra charges for Nayland?

No. Our quotes include travel, with the same prices everywhere we work.

Do you cover Nayland?

We do. We send a technician to Nayland for every job, with no extra charge for travel.

Is it OK to have pets in the house?

Just keep them out of the work area. We will tell you when the room can be used again.

What does non-slip bath coating cost?

Every job gets a fixed price based on photos of the damage. Send a close-up and a picture of the whole item and your postcode.

Will there be a smell?

Some materials have a smell while they’re applied, which is why we ventilate. It clears as the materials cure.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.