Isle of Wight · England
Non-Slip Bath Coating for Niton homes
Fixed-price non-slip bath coating in Niton and the surrounding area, done in a single visit in most cases.
- Worn-out textured areas
- A bath or tray that is slippery when wet
- Safety for older or less mobile people
Non-slip bath coating in Niton, done in place
It’s popular with homes with older or less mobile people, holiday lets and families. The coating is clear and textured, so the bath looks much the same. We regularly repair enamelled baths, resurfaced baths and wet room floors (ask us), and common reasons people get in touch are a bath or tray that is slippery when wet and bath mats that harbour mould or get forgotten.
A one-year guarantee comes as standard. A soft brush and mild cleaner keep it clean. Don’t use abrasive pads on the textured area.
- Area
- Niton (PO38)
- Region
- Isle of Wight
- Warranty
- One year on every repair
- Price
- Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Your questions about non-slip bath coating in Niton
Can I get a quote without a visit?
Generally, yes. A close-up and a wider photo are enough to give a fixed quote.
Can you repair something that is been repaired before?
Yes, regularly. Removing the old work can add time, and that is in the quote.
Do the materials smell?
Some materials have a smell while they’re applied, which is why we ventilate. It clears as the materials cure.
Do you work for landlords and businesses?
Yes. We work for landlords, agents, builders and businesses as well as homeowners across Isle of Wight.
What happens after I send pictures?
We review the photos and send a fixed quote.
Will a non-slip coating change how my bath looks?
Only slightly: the treated area looks slightly matt.
What if the damage is worse than the photos show?
We’ll show you and explain before doing anything extra. Nothing extra is done without your say-so.
I rent my home. Can I book you?
Of course. Check with your landlord; we can send the quote to them too.
When we’d advise against a repair
We’d rather lose a job than do one that will not last, so these are the limits:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
If in doubt, send photos and we’ll say what we think.
Materials we work on in Niton
- Enamelled baths
- Acrylic baths
- Shower trays
- Resurfaced baths
- Wet room floors (ask us)
Landlords, agents and businesses in Niton
Letting agents frequently send us pictures straight from the inventory. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
We work for landlords, letting agents and housing providers in Niton as well as homeowners. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
DIY kit or professional repair?
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. The trouble is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair won’t last.
If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it will not stop us repairing it. It does add a little time, so tell us about it when you send photos.
Should you replace it?
Instead, you could go for a new textured bath or tray, or a bath mat, which traps water and needs cleaning. A coating treats your existing bath or tray. Set against the cost of replacement, repairing normally costs far less, because nothing has to be taken out, refitted or made good. The quote lists exactly what you’re paying for.
Why us?
- Typically one visit, start to finish
- No extra charge for your area
- Fixed prices from your photos
- CHAS and Constructionline accredited
Take a look at our full price list.
What affects the price in Niton
Every quote is fixed and free. What we take into account:
- How much damage there is
- Whether it’s a chip, crack, burn or wear
- Where the damage is and how we get to it
- Previous DIY repairs that have to come out
Rather than charging by the hour, we fix the price before we start. It depends on the damage, the material and access.
Quotes from your photos
Before you send pictures, a few simple things make all the difference:
- A coin beside the damage so we can judge size
- Daylight if possible, and no flash reflection
- Details of any past repairs
- A close-up of the damage, in focus
Email us a photo of the damage and a wider shot of the whole item, with your PO38 postcode, and we will come back with a fixed quote.
Where we work around Niton
Niton is about 8 miles south of Newport, in Isle of Wight. From the centre of Niton to the outlying streets, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. Niton is one of 125 places in Isle of Wight where we work.
All of PO38 is covered, from the main roads to the quietest streets. From Puckwell Lane, School Lane and Church Street or a nearby road, a technician can come to you. Neighbouring places we cover include Puckaster (1 mile south), Bierley (1 mile north), Blackgang (1 mile west), Whitwell (1 mile north-east) and Southford (1 mile north). Within a short drive, we also cover Newport (8 miles north), Ryde (11 miles north-east), Cowes (12 miles north), Sandown (7 miles north-east), Shanklin (6 miles north-east) and Ventnor (3 miles east). For island and remote addresses, ring us first and we’ll plan the trip.
Local landmarks in Niton
Around Niton, we work in homes near Niton Primary School, Church of St. John the Baptist and White Lion pub and the streets around them. Further afield, we also cover the area around Blackgang Sawmill Museum (1.3 miles west) and Arthur Webster Memorial Hospital for Children (5.6 miles north-east). For a walk, there’s Stenbury Down.
What happens on the day
Here’s how a visit typically runs: we arrive on time, sheet and mask the area around the job, do the job and clear up. Plan for a few hours from start to finish. Before we go, we’ll explain when it can be used and what to avoid for the first few days.
- First the standing area is cleaned and degreased.
- We mask out the area to be treated.
- The clear textured coating is applied.
- We lift the masking for a clean edge.
- The coating is left to cure before use, usually overnight.
Getting ready for the visit
- Let us know which floor the room is on
- Open a window if you can
- Keep a parking space free if you can
Getting a price
There’s no need for us to visit first. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we’ll come back to you with a fixed figure.
Read more
What we are called out for in Niton
Baths and trays are made smooth so they’re easy to clean, yet with soap and water on them they become slippery. Textured areas on older baths wear smooth too.
The things customers normally mention when they call are:
- Bath mats that harbour mould or get forgotten
- A bath or tray that is slippery when wet
- Safety for older or less mobile people
- Resurfaced baths that are now too smooth
What your quote should include
- What protection goes down before work starts
- What happens if the damage is worse than the photos show
- Whether cleaning and preparation are in the price
- Whether the price covers travel
More services for Niton
About our accreditations · Every repair comes with a one-year guarantee.
