Kent · England

Non-slip bath & shower coating in Old Romney, Kent

Clear non-slip coatings for baths and shower trays for householders, landlords and businesses in Old Romney. Free, fixed quotes from your photos.

  • A bath or tray that is slippery when wet
  • Resurfaced baths that are now too smooth
  • Bath mats that harbour mould or get forgotten
Surface Doctor technician refinishing the outside of a roll-top bath

Non-slip bath coating near Old Romney

Our work in Old Romney

Old Romney is about 10 miles south-west of Hythe, in Kent. Whether you’re in the middle of Old Romney or on the outskirts, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. We cover all 922 towns and villages in Kent. Our nearest city page is London, about 55 miles away.

Postcode districts we cover here: TN29. Other places close to Old Romney include Ivychurch (2 miles north), New Romney (2 miles east), Brenzett (2 miles north-west), Lydd (3 miles south) and Brookland (3 miles west). Further out, we also cover Ashford (10 miles north), Folkestone (14 miles north-east), Hythe (10 miles north-east), Hawkinge (14 miles north-east), Tenterden (10 miles north-west) and Cheriton (13 miles north-east).

Around Old Romney

Locally, our jobs take us to homes close to Church of St Clement and The Marsh Academy and the streets around them. The closest station to Old Romney is Appledore (Kent) station, about 4.5 miles north-west of the centre. Well-known places in the area include Brenzett Aeronautical Museum (1.9 miles north-west) and Romney 'castle' (less than half a mile north-east). Green spaces nearby include Burnthouse Pen and Dungeness National.

Map of Old Romney © OpenStreetMap contributors

About our non-slip bath coating in Old Romney

It suits older people, families and holiday lets. The coating is clear and textured, so it shows only as a slightly matt area where you stand. Whether it’s a bath or tray that is slippery when wet and bath mats that harbour mould or get forgotten, we can usually put it right.

We guarantee the work for a year. If there’s a problem with the repair within the year, we return and sort it. A soft brush and mild cleaner keep it clean. Avoid scourers on the coating.

Before and after: an old shower tray refinished by Surface Doctor
Location
Old Romney (TN29)
County
Kent
Guarantee
A year, on every repair
Quotes
Free and fixed, from your pictures
Call
0345 017 0787
Last updated
23 October 2026

Honest limits

A repair isn’t right for every job, for example:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

Not sure? Send pictures and we’ll give you a straight answer.

What we work on

  • Wet room floors (ask us)
  • Acrylic baths
  • Resurfaced baths
  • Shower trays
  • Enamelled baths

Landlords, agents and businesses in Old Romney

We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We are CHAS, Constructionline and SafeContractor accredited.

For developers and builders, we fix damage before handover, so there is no need to replace a damaged item at the last minute. We can visit several plots in one trip.

Signs you need non-slip bath coating in Old Romney

Smooth surfaces are easy to clean, but with soap and water on them they become slippery. Textured areas on older baths wear smooth too.

It’s worth getting a quote if you see:

  • Resurfaced baths that are now too smooth
  • A bath or tray that is slippery when wet
  • Worn-out textured areas
  • Bath mats that harbour mould or get forgotten

What your quote should include

  • How your room will be protected
  • Whether the price covers travel
  • A fixed quote, and whether VAT is included
  • Whether a trained technician does the job

Our hiring checklist

Should I try a DIY kit first?

You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.

A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it will not stop us repairing it. It does add a little time, so tell us about it when you send pictures.

How the visit works

We work cleanly and quietly, so you can carry on at home. Protection goes down first, then the work takes a morning or an afternoon. Before we leave, we explain the curing time and the aftercare.

  1. First the standing area is cleaned and degreased.
  2. Next we mask off the area.
  3. We put on the clear non-slip coating.
  4. The masking comes off to leave a neat edge.
  5. Once it has cured, normally overnight, it’s ready.

Before we arrive

  • Let us know which floor the room is on
  • Ensure the area is dry
  • Keep children and pets away from the room on the day

Get a quote

You do not need a survey visit. Nearly every job can be priced from photos: we need a close-up, a wider picture and your postcode, and we’ll come back to you with a fixed figure.

Get a free quote

Related advice

Repair or replace: which is better?

The alternatives are a new textured bath or tray, or a bath mat, which traps water and needs cleaning. A non-slip coating treats your existing bath or tray. The price depends on how much damage there is and what kind, what it’s made of and how many jobs we combine into one visit. We give a fixed price from your pictures, so you know the cost before you book.

Why choose Surface Doctor in Old Romney

  • Work done at your home or business
  • Fixed prices from your photos
  • No extra charge for your area
  • Honest advice, even when it means no job

Read our pricing.

What affects the price in Old Romney

There is no charge for travel to Old Romney. The price depends on:

  • Doing more than one item at once
  • How much damage there is
  • How hard the colour is to match
  • Previous DIY repairs that have to come out

We do not add extras on the day. The price we quote from your photos is the price you pay, unless the damage turns out to be different, in which case we talk to you first.

How to get a fixed price

When you take your photos, these tips help us give you a firm price:

  • Daylight if possible, and no flash reflection
  • A close-up of the damage, in focus
  • The postcode, so we can plan the visit
  • What it’s made of, if you know

Email us photos of the damage and a wider shot of the whole item, with your TN29 postcode, and we will reply with a fixed price.

Old Romney: your questions answered

Can you repair several things at once?

Yes. Combining jobs on one visit brings the cost down. Send pictures of everything you’d like done.

What happens once I’ve sent pictures?

We review the pictures and send a fixed quote.

Do you hold any accreditations?

Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.

Does someone need to be in?

Yes. We need access to the room while we work, at a time we agree with you.

Will a non-slip coating change how my bath looks?

Very little: it shows as a matt area where you stand.

Do you charge for travel?

No. Our quotes include travel, and we charge the same wherever you are.

When can you do it?

Your quote comes with available dates. If it’s urgent, say so and we’ll do what we can.

Is it OK to have pets in the house?

Keep pets and children away from the work area on the day.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.