Kent · England

Non-slip bath & shower coating in Brookland, Kent

Local non-slip bath coating for Brookland: a fixed quote from pictures, a tidy visit and a one-year guarantee.

  • Bath mats that harbour mould or get forgotten
  • Worn-out textured areas
  • Resurfaced baths that are now too smooth
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted non-slip bath coating in Brookland

Work for landlords and builders

Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.

For anyone letting property in or around Brookland, we will quote for several properties at once. Just send photos for each address and we will price them together.

Non-slip bath coating in Brookland without replacing anything

The coating is clear and textured, so the bath looks much the same. It suits homes with older or less mobile people, holiday lets and families. Common call-outs are for worn-out textured areas and resurfaced baths that are now too smooth, across acrylic baths, shower trays and enamelled baths.

Whatever the size of the job, it’s backed by a one-year guarantee. A soft brush and mild cleaner keep it clean. Do not use abrasive pads on the textured area.

Location
Brookland (TN29)
Area hub
Kent
Guarantee
A year, on every repair
Price
Free, fixed quote from pictures
Phone
0345 017 0787
Page updated
23 October 2026
Before and after: an old shower tray refinished by Surface Doctor

Do you need non-slip bath coating in Brookland?

Baths and trays are made smooth so they’re easy to clean, but with soap and water on them they become slippery. Textured areas on older baths wear smooth too.

Most people contact us when they notice one of these:

  • Bath mats that harbour mould or get forgotten
  • Worn-out textured areas
  • Resurfaced baths that are now too smooth
  • A bath or tray that is slippery when wet

Questions to ask before you book

  • What the guarantee covers, and for how long
  • How soon you can use it again
  • Aftercare advice
  • Whether they match the colour on site

Choosing a repair company

Should I try a DIY kit first?

If you’ve already tried a DIY fix, that is fine. We take the old repair out and do it properly, so it will not stop us repairing it. It does add a little time, so tell us about it when you send pictures.

What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.

When we would advise against a repair

Honesty matters more than a booking, so here’s what a repair will not do:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

Send us photos and we’ll tell you honestly.

Materials we work on in Brookland

  • Enamelled baths
  • Shower trays
  • Wet room floors (ask us)
  • Resurfaced baths
  • Acrylic baths

How the visit works

We turn up at the time we agreed with you and looks over the damage before anything else. The floor and nearby surfaces are covered before any work starts. Most visits take a morning or an afternoon, and the room is left clean and tidy.

  1. First the standing area is cleaned and degreased.
  2. The area to be treated is masked out.
  3. We apply the clear textured coating.
  4. We lift the masking for a clean edge.
  5. The coating is left to cure before use, generally overnight.

Before we arrive

  • Let us know if it has been repaired before
  • Ensure the area is dry
  • Mention any parking restrictions or tricky access

How to get a price

The quickest way to a price is to send a couple of photos using our quote form or ring us. We’ll say immediately whether it can be repaired.

Get a free quote

Advice

Brookland questions

What happens if you find more damage?

We’ll show you and explain before doing anything extra. You won’t be charged for anything you haven’t agreed.

Are you accredited?

Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.

Can I get a quote without a visit?

Nearly always. We only ask to see it in person if the photos can’t show what we need.

Does someone need to be in?

Yes. We need access to the room while we work, at a time we agree with you.

What happens once I’ve sent photos?

We review the photos and send a fixed quote.

Is a non-slip bath easy to clean?

Yes. A soft brush and mild cleaner is all it needs.

Can you redo someone else’s repair?

In most cases. The old repair comes out first, so mention it when you send photos.

Is there a call-out fee?

There is no separate call-out charge. Your fixed price includes everything.

Prices and what affects them

Each job gets its own fixed quote. This is what makes a difference:

  • Doing more than one item at once
  • How easy the damage is to reach
  • Whether old repairs or coatings need taking off
  • What the surface is made of

Set against the cost of replacement, a repair is typically a fraction of the price, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.

How to get a fixed price

It only takes a minute to photograph the damage, and it saves a visit. Please include:

  • Where you are, by postcode
  • Natural light rather than flash
  • Any details about the material
  • A coin or ruler next to the damage for scale

A quote takes minutes to ask for: take one close-up and one wider shot of the bath or shower tray, add your postcode and send them over. What comes back is a fixed price, not a guess.

Why repair rather than replace?

The alternatives are replacing the bath or tray with a textured one, or relying on a mat that needs lifting and cleaning. A coating treats your existing bath or tray. Every job is a little different, so we price each one individually. What’s damaged, how badly and how easy it is to reach all make a difference, and combining jobs on one visit brings the cost down.

Why Brookland clients choose us

  • We come to you, anywhere in the UK
  • A fixed quote before booking
  • No extra charge for your area
  • Dust sheets down, tidy finish

See our prices page.

Brookland and nearby

Brookland is about 10 miles south of Ashford, in Kent. Jobs in Brookland are booked in like any other job: a fixed quote from photos, then a visit to do the work. We cover all 922 towns and villages across Kent, from the larger towns to small villages. We work right across the region, from Brookland to London (53 miles away).

Jobs in TN29 work the same way as everywhere else we cover. Whether you live on High Street, Brook Grove and Rye Road or anywhere nearby, we can come to you. If you are just outside Brookland, we cover Brenzett (1 mile north-east), Snargate (2 miles north), Ivychurch (3 miles north-east), Old Romney (3 miles east) and Appledore (3 miles north-west). Larger places within reach include Ashford (10 miles north), Hythe (12 miles north-east), Tenterden (8 miles north-west), Cheriton (15 miles north-east), Kennington (12 miles north) and New Romney (5 miles east).

What’s near Brookland

We visit homes around The Royal Oak Inn, Brookland Church of England Primary School and St Augustine's Church, among other places. Brookland’s nearest station is Appledore (Kent) station, about 2.5 miles north of the centre. A little further out are Brenzett Aeronautical Museum (1.6 miles north-east) and Romney 'castle' (2.9 miles east). For a walk, there is Burnthouse Pen.

Map of Brookland © OpenStreetMap contributors
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.