Lincolnshire · England

Non-Slip Bath Coating for Owmby homes

Clear non-slip coatings for baths and shower trays for homeowners, landlords and businesses in Owmby. Send pictures for a free, fixed quote.

  • A bath or tray that is slippery when wet
  • Resurfaced baths that are now too smooth
  • Bath mats that harbour mould or get forgotten
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted non-slip bath coating in Owmby

What a repair cannot fix

To be straight with you, some problems need a different fix:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

If in doubt, send photos and we will say what we think before booking.

Materials we repair

  • Wet room floors (ask us)
  • Resurfaced baths
  • Shower trays
  • Acrylic baths
  • Enamelled baths

Non-slip bath coating in Owmby, done in place

It’s popular with homes with older or less mobile people, holiday lets and families. The coating is clear and textured, so it shows only as a slightly matt area where you stand. Whether it’s bath mats that harbour mould or get forgotten and resurfaced baths that are now too smooth, we can usually put it right.

You get a one-year guarantee, the same in Owmby as everywhere else we work. A soft brush and mild cleaner keep it clean. Avoid scourers on the coating.

Before and after: an old shower tray refinished by Surface Doctor
Area
Owmby (DN38)
County
Lincolnshire
Warranty
12 months on all our work
Quote
Fixed and free, based on photos
Telephone
0345 017 0787
Last updated
23 October 2026

Why repair rather than replace?

The alternatives are replacing the bath or tray with a textured one, or relying on a mat, which traps water and needs cleaning. A non-slip coating adds grip to the bath you have. Our prices are the same across the UK, with no extra for Owmby. The job itself decides the price: the material, the amount of damage and how many items.

What you get with us

  • Rooms protected and left tidy
  • No need to remove anything
  • Every repair guaranteed for a year
  • Honest advice, even when it means no job

See our pricing.

How it works

We begin by going over the job with you, so you know exactly what we are doing. After that, protection goes down around the work area and the work begins. Allow a morning or an afternoon, and we’ll keep you posted as we go.

  1. We clean and degrease the standing area.
  2. We mask out the area to be treated.
  3. We put on the clear non-slip coating.
  4. The masking comes off to leave a neat edge.
  5. The coating is left to cure before use, generally overnight.

Before we arrive

  • Have a window or extractor fan available
  • Plan for the room to be out of bounds to pets and children
  • Let us know about parking or access

Ask for a price

There is no need for us to visit first. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we’ll reply with a fixed quote.

Send pictures for a quote

Advice

When to call us in Owmby

Baths and trays are made smooth so they’re easy to clean, but wet, soapy surfaces are slippery. Textured areas on older baths wear smooth too.

The most common problems we’re called about are:

  • Bath mats that harbour mould or get forgotten
  • Worn-out textured areas
  • A bath or tray that is slippery when wet
  • Resurfaced baths that are now too smooth

What your quote should include

  • When it can be used again
  • Who will actually do the work
  • How to look after the finish
  • Whether there are any call-out or travel charges

Choosing a repair company

Landlord and trade work in Owmby

Hotels, guest houses and holiday lets can’t afford rooms out of action for long, so most of our work is done in a single visit. We can work around your bookings.

We’re used to working with agents and managing companies. Just send pictures, the address and how to get access and we will handle the rest.

What non-slip bath coating costs

There is no charge for travel to Owmby. The price depends on:

  • The colour and finish to match
  • Whether old repairs or coatings need taking off
  • Access to the area
  • How much damage there is

A few things move the price: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.

Quotes from your photos

Photographing the damage takes a minute, and it saves a visit. Please include:

  • One picture of the whole bath or shower tray
  • The postcode, so we can plan the visit
  • Good light, ideally daylight, without flash glare
  • Whether it’s been repaired or coated before

For most jobs, photos are all we need to give you a price. Add a line about what happened and your postcode, and we’ll reply with a fixed quote and the earliest dates we have.

Common questions in Owmby

What information do you need?

Some pictures, your postcode and how to reach you. On the day, we only need access to the room.

How do I clean it?

Yes. A soft brush and mild cleaner is all it needs.

How much does non-slip bath coating cost in Owmby?

We give a fixed price from your pictures. Send a close-up and a picture of the entire item with your DN38 postcode.

Are there extra charges for Owmby?

There’s no separate call-out charge. The fixed quote covers the visit and the work.

Is it safe with children and pets around?

Keep pets and children away from the work area on the day.

I rent my home. Can I book you?

We can work for tenants, landlords or agents. Get your landlord’s agreement first.

What happens next?

You will get a fixed quote back. You’re under no obligation.

Can landlords book you?

Yes, frequently. We can quote for several properties together and work between tenancies.

DIY repairs versus a professional job

A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.

If you are set on a kit, follow its instructions closely, and don’t use it until it has fully cured. If it doesn’t work out, we can still repair it properly.

Covering Owmby

Owmby is about 12 miles east of Scunthorpe, in Lincolnshire. Clients in Owmby get the same service as everywhere else we cover: a fixed price from your photos, then a visit to do the work. Owmby is one of 732 towns and villages in Lincolnshire we cover. Our jobs stretch from Owmby to Leeds (about 52 miles away).

We cover every part of DN38 and the streets around it. Neighbouring places we cover include Searby (1 mile north-west), West Lindsey (1 mile north), Grasby (1 mile east), North Kelsey Moor (1 mile south) and Somerby (1 mile north-west). Larger places within reach include New Waltham (13 miles east), Humberston (15 miles east), Market Rasen (10 miles south), Kirton in Lindsey (10 miles west), Caistor (3 miles south-east) and Holton le Clay (13 miles east).

Near you in Owmby

Our customers here include homes close to Grasby All Saints Church of England Primary School and Church of Saint Nicholas, among other places. The closest station to Owmby is Barnetby station, about 3.4 miles north of the centre. Further afield, we also cover the area around Caistor Castle Hill (3.3 miles south-east).

Map of Owmby © OpenStreetMap contributors
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.