Isle of Wight · England
Non-Slip Bath Coating for Parkhurst homes
Fixed-price non-slip bath coating in Parkhurst and the surrounding area, typically in one visit and guaranteed for a year.
- Worn-out textured areas
- A bath or tray that is slippery when wet
- Safety for older or less mobile people
Work for landlords and builders
Hospitality businesses need rooms back in use quickly, so most of our work is done in a single visit. We will fit around changeovers where we can.
For developers and builders, we fix damage before handover. We can visit several plots in one trip to keep costs down.
Non-slip bath coating in Parkhurst, done in place
The coating is clear and textured, so it shows only as a slightly matt area where you stand. It suits older people, families and holiday lets. We work on resurfaced baths, enamelled baths and acrylic baths, and the jobs we see most are resurfaced baths that are now too smooth and bath mats that harbour mould or get forgotten.
The work is covered for a year after we finish. If anything isn’t right, ring us and we will sort it. A soft brush and mild cleaner keep it clean. Avoid scourers on the coating.
- Location
- Parkhurst (PO30)
- Area hub
- Isle of Wight
- Warranty
- 12 months on all our work
- Quotes
- Free and fixed, from your pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Common problems we fix in Parkhurst
Baths and trays are made smooth so they’re easy to clean, yet with soap and water on them they become slippery. The textured patch on an older bath also wears down over time.
The most common problems we are called about are:
- Resurfaced baths that are now too smooth
- Bath mats that harbour mould or get forgotten
- Worn-out textured areas
- A bath or tray that is slippery when wet
What to look for in a quote
- Whether the colour is mixed to match
- What protection goes down before work starts
- What aftercare is recommended
- Who will actually do the work
What we can’t put right
A few problems are outside what a surface repair can do:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
Not sure? Send photos and we will give you a straight answer before you book.
What we work on
- Wet room floors (ask us)
- Shower trays
- Enamelled baths
- Resurfaced baths
- Acrylic baths
Can I fix it myself?
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
For a hairline mark somewhere you will never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
Repair or replace in Parkhurst?
Instead, you could go for replacing the bath or tray with a textured one, or relying on a mat that needs lifting and cleaning. A coating treats your existing bath or tray. A repair generally costs much less than people expect, particularly next to the cost of replacement. Send pictures and we’ll give you the exact figure.
Why book with us
- We’ll tell you if it’s not worth repairing
- Nothing taken out or refitted
- One-year guarantee on every repair
- Fixed prices from your pictures
Take a look at our pricing.
What non-slip bath coating costs
You won’t pay by the hour. The price depends on:
- Whether old repairs or coatings need taking off
- How many items we do on one visit
- The colour and finish to match
- Where the damage is and how we get to it
Compared with replacing, a repair is usually a fraction of the price, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
Send pictures for a quote
Almost every job we do is priced from pictures. This is what to send:
- Whether it’s been repaired or coated before
- Any details about the material
- One sharp close-up of the damage
- Where you are, by postcode
A quote takes minutes to ask for: photograph the damage, then the whole bath or shower tray, add your postcode and send them to us. What comes back is a fixed price, not a guess.
Covering Parkhurst
Parkhurst is about 1 mile north of Newport, in Isle of Wight. Anywhere in PO30, we carry out the work at your property. Parkhurst is one of 125 towns and villages in Isle of Wight where we work. Our nearest city page is London, about 75 miles away.
Our visits in PO30 are booked in the same way as anywhere else. That includes homes on Dodnor Lane, Argyle Road and Sherwood Road and the roads around them. We also cover the places around Parkhurst: Noke Common (1 mile north-west), Hunny Hill (1 mile south), Forest Side (1 mile south-west), Northwood (2 miles north) and Rew Street (2 miles north-west). We also work in nearby towns such as Ryde (6 miles east), Cowes (3 miles north), Sandown (8 miles south-east), Shanklin (8 miles south-east), Ventnor (9 miles south-east) and East Cowes (3 miles north). Some remote addresses need extra planning, so call us to arrange it.
Around Parkhurst
We visit homes around Hunnyhill Primary School, Medina College and Seaclose Park and the streets around them. Nearby too are The Stag pub (0.5 miles north) and Island Innovation VI Form Campus (1.4 miles south). Well-known places in the area include Isle of Wight Bus & Coach Museum (1 mile south-east) and Carisbrooke Castle (2.1 miles south). Green spaces nearby include Mill Hill and Briddlesford Nature Reserve.
Also near Parkhurst
What else we do in Parkhurst
How it works
Once we’re through the door, the aim is to do the job without disturbing the rest of your home. We mask off everything nearby, the work takes a few hours, depending on what we find, and we finish by cleaning up and talking you through the result.
- We start by degreasing the area where you stand.
- Next we mask off the area.
- The clear textured coating is applied.
- The masking comes off to leave a neat edge.
- The coating is left to cure before use, generally overnight.
Preparing for the visit
- Open a window if you can
- Plan for the room to be out of bounds to pets and children
- Tell us about any previous repairs or coatings
Getting a price
Email us photos of the damage and one of the whole item, with your PO30 postcode, and we will reply with a fixed price.
Read more
Questions from Parkhurst
What if the damage is worse than the photos show?
We stop, show you and agree any change before carrying on. Nothing extra is done without your say-so.
Can I add another job to the visit?
Yes. Combining jobs on one visit brings the cost down. Include photos of each item.
Will you leave a mess?
No. The work area is masked and covered, and we leave the room clean.
Do I have to be there?
Yes. We need access to the room while we work, at a time we agree with you.
When can you do it?
We’ll give you dates with your quote. Tell us if you need it done quickly.
Do you cover the entire of Isle of Wight?
We cover the whole UK, including Parkhurst and the rest of Isle of Wight. Send your postcode with your photos and we’ll offer you dates.
Are you accredited?
Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Is a non-slip bath easy to clean?
Yes. A soft brush and mild cleaner is all it needs.
About our accreditations · Every repair comes with a one-year guarantee.
