Essex · England

Non-Slip Bath Coating for Pedlars End homes

Non-slip bath coating in Pedlars End without the cost of replacing. Send us pictures for a fixed quote, then we come to you.

  • Worn-out textured areas
  • Safety for older or less mobile people
  • A bath or tray that is slippery when wet
Surface Doctor technician refinishing the outside of a roll-top bath

Book non-slip bath coating in Pedlars End

How we handle non-slip bath coating in Pedlars End

It’s popular with homes with older or less mobile people, holiday lets and families. It’s a clear, textured coating, so the bath looks much the same. Our repair technicians work on acrylic baths, wet room floors (ask us) and shower trays, and people most frequently call us about resurfaced baths that are now too smooth and bath mats that harbour mould or get forgotten.

We guarantee the work for a year. If something isn’t right in that time, we come back and put it right. A soft brush and mild cleaner keep it clean. Don’t use abrasive pads on the textured area.

Location
Pedlars End (CM5)
Region
Essex
Warranty
A year, on every repair
Price
Free and fixed, from your photos
Call
0345 017 0787
Page updated
23 October 2026
Discoloured square shower tray restored with a new white finish

How it works

Visits start with a quick look at the job together, so you know exactly what we are doing. After that, protection goes down around the work area and the work begins. You can expect it to take a morning or an afternoon, and we will tell you if anything changes.

  1. We clean and degrease the standing area.
  2. We mask out the area to be treated.
  3. We put on the clear non-slip coating.
  4. We remove the masking for a neat edge.
  5. We leave it to cure, usually overnight.

How to prepare

  • Mention any earlier repairs or resurfacing
  • Clear the area around the damage
  • Avoid using the area for a few hours before we arrive

Get a quote

A quote takes minutes to ask for: take one close-up and one wider shot of the bath or shower tray, add your postcode and send them to us. What comes back is a fixed quote, not a guess.

Get a fixed quote

Advice

What affects the price in Pedlars End

We price every job individually. What matters most is:

  • The type of damage
  • The material and finish
  • Any earlier repairs that need removing first
  • How much damage there is

It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Send pictures and you’ll get a fixed figure.

Send pictures for a quote

You can take the photos on your phone. Make sure they show:

  • Where you are, by postcode
  • Any details about the material
  • A picture taken from further back
  • One sharp close-up of the damage

To get a price, send two or three pictures through our quote form or call us. We will tell you honestly whether it can be repaired.

Landlords, agents and businesses in Pedlars End

Housing associations and facilities teams use us for planned and reactive repairs. A repair avoids taking out and refitting, which is easier on the people living there.

Builders use us to fix snagging damage before handover, so there is no need to replace a damaged item at the last minute. We can visit several plots in one trip to keep costs down.

Questions from Pedlars End

Will a non-slip coating change how my bath looks?

Only slightly: the treated area looks slightly matt.

I’m a tenant. Can you help?

Yes, but check with your landlord or agent first. Many landlords are happy for a repair to be arranged.

Will there be a smell?

A little, depending on the job. Ventilation keeps it to a minimum, and it soon fades.

When can you do it?

That depends on our diary for your area. Send pictures with your postcode and we will reply with the earliest dates.

How do I get a price for non-slip bath coating in Pedlars End?

We give a fixed quote from your photos. Send a close-up of the damage and a wider photo with your CM5 postcode.

Is it OK to have pets in the house?

Keep pets and children away from the work area on the day.

Do you work for landlords and businesses?

Yes. We work for landlords, agents, builders and businesses as well as householders.

Can you repair something that’s been repaired before?

Generally, yes. Let us know what was used before and we’ll plan for it.

Common problems we fix in Pedlars End

Smooth surfaces are easy to clean, but wet, soapy surfaces are slippery. Textured areas on older baths wear smooth too.

If you can see any of these, send us a photo:

  • Safety for older or less mobile people
  • Resurfaced baths that are now too smooth
  • A bath or tray that is slippery when wet
  • Worn-out textured areas

What your quote should include

  • What happens if the damage is worse than the pictures show
  • How the colour is matched
  • What the guarantee covers, and for how long
  • How your room will be protected

Choosing a repair company

About Pedlars End

Pedlars End is about 5 miles south-east of Harlow, in Essex. We work in every kind of home, old or new, large or small, plus businesses and rented homes. Pedlars End is one of 644 towns and villages in Essex where we work. Our nearest city page is London, about 21 miles away.

Our visits in CM5 are booked in the same way as anywhere else. We also cover the places around Pedlars End: Moreton (1 mile north-east), Bobbingworth (1 mile south-east), Bovinger (1 mile south-west), Little Laver (2 miles north-east) and Shelley (2 miles south-east). Further out, we also cover Chelmsford (12 miles east), Harlow (5 miles north-west), Brentwood (9 miles south-east), Billericay (12 miles south-east), Loughton (9 miles south-west) and Waltham Abbey (9 miles west).

Local landmarks in Pedlars End

Our customers here include homes close to The Ongar Academy, Church of St Mary the Virgin and Moreton Church of England Voluntary Aided Primary School. A little further out are Willingale Doe (4.4 miles east) and St. Margaret's Hospital (4.5 miles south-west). Not far away are Gernon Bushes.

Map of Pedlars End © OpenStreetMap contributors

Can I fix it myself?

Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is usually the cheaper route.

DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.

What a repair cannot fix

Some problems need a builder, plumber or fitter rather than us:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

Not sure? Send photos and we will give you a straight answer before you book.

What we work on

  • Resurfaced baths
  • Shower trays
  • Acrylic baths
  • Wet room floors (ask us)
  • Enamelled baths

Repair or replace: which is better?

Instead, you could go for replacing the bath or tray with a textured one, or a bath mat that needs lifting and cleaning. A non-slip coating treats your existing bath or tray. A repair typically costs much less than people expect, especially compared with replacing and refitting. Send photos and we’ll give you the exact figure.

Why us?

  • Generally one visit, start to finish
  • No extra charge for your area
  • Every repair guaranteed for a year
  • No need to remove anything

Read our full price list.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.