Buckinghamshire · England

Non-slip bath & shower coating in Penn, Buckinghamshire

Non-slip bath coating in and around Penn: photo quotes, tidy work and a year’s guarantee.

  • Worn-out textured areas
  • Resurfaced baths that are now too smooth
  • Bath mats that harbour mould or get forgotten
Surface Doctor technician refinishing the outside of a roll-top bath

Non-slip bath coating in Penn

Non-slip bath coating in Penn without replacing anything

The coating is clear and textured, so the bath looks much the same. It suits older people, families and holiday lets. We regularly repair shower trays, enamelled baths and resurfaced baths, and the jobs we see most are resurfaced baths that are now too smooth and bath mats that harbour mould or get forgotten.

Whatever the size of the job, you get the same one-year guarantee in Penn and across Buckinghamshire. Clean with a soft brush and a mild cleaner. Avoid scourers on the coating.

Before and after: an old shower tray refinished by Surface Doctor
Location
Penn (HP10)
Region
Buckinghamshire
Cover
One year on every repair
Price
Free, fixed price from pictures
Call
0345 017 0787
Last updated
23 October 2026

When we’d advise against a repair

Honesty matters more than a booking, so here’s what a repair will not do:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

Send us pictures and we’ll tell you honestly before you book.

What we work on

  • Enamelled baths
  • Resurfaced baths
  • Shower trays
  • Acrylic baths
  • Wet room floors (ask us)

Should I try a DIY kit first?

You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.

If you do try a kit, read the instructions carefully, and do not use it until it has fully cured. If it does not work out, we can still repair it properly.

Our work in Penn

Penn is about 2 miles east of High Wycombe, in Buckinghamshire. From the centre of Penn to the outlying streets, we offer exactly the same service: a fixed quote, a tidy visit and a guarantee. Our repair technicians cover 263 places across Buckinghamshire. Our nearest city page is London, about 27 miles away.

Here we cover the HP10 postcode area. From Church Road, Glebelands and Carter Walk or anywhere nearby, a technician can come to you. We also travel to Beacon Hill (1 mile south-east), Loudwater (2 miles south), Forty Green (2 miles south-east), Knotty Green (2 miles south-east) and Winchmore Hill (2 miles north-east). Within a short drive, we also cover Aylesbury (14 miles north), Chesham (6 miles north-east), Marlow (5 miles south-west), Amersham (5 miles north-east), Beaconsfield (3 miles south-east) and Chalfont St Peter (6 miles east).

Near you in Penn

Typical jobs here are in homes near Sir William Ramsay School, Church of St Margaret and The Queens Head Public House, among other places. The nearest railway station is High Wycombe station, about 2.1 miles west of the centre. Nearby you’ll also find Eden (2.6 miles west) and High Wycombe Castle (2.3 miles west). For a walk, there is Gomm's Wood.

Map of Penn © OpenStreetMap contributors

Common problems we fix in Penn

Smooth surfaces are easy to clean, but wet, soapy surfaces are slippery. Textured areas on older baths wear smooth too.

People typically call us after spotting something like this:

  • Resurfaced baths that are now too smooth
  • Bath mats that harbour mould or get forgotten
  • Safety for older or less mobile people
  • A bath or tray that is slippery when wet

Questions to ask before you book

  • How long the guarantee is and what it covers
  • Whether a trained technician does the job
  • If travel is included in the price
  • How soon you can use it again

How to compare quotes

What affects the price in Penn

You will not pay by the hour. The price is based on:

  • Whether it’s a chip, crack, burn or wear
  • Previous DIY repairs that have to come out
  • Access to the area
  • How hard the colour is to match

There are no surprise extras on the day. What we quote from your photos is what you pay, unless the damage turns out to be different, in which case we talk to you first.

How to get a fixed quote

You can normally get a fixed quote without us visiting. To make it quick:

  • Whether it’s been repaired or coated before
  • A clear, close picture of the problem area
  • A photo taken from further back
  • Good light, ideally daylight, without flash glare

You do not need a survey visit. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we will come back to you with a fixed figure.

Why repair rather than replace?

Instead, you could go for replacing the bath or tray with a textured one, or a bath mat that needs lifting and cleaning. A coating adds grip to the bath you have. Every job is a little different, so we price each one individually. The size and type of damage, the material and access all make a difference, and combining jobs on one visit brings the cost down.

Why us?

  • Same prices wherever you are
  • A fixed quote before booking
  • We come to you, anywhere in the UK
  • We’ll tell you if it’s not worth repairing

See our pricing.

Your questions about non-slip bath coating in Penn

Is there any odour?

A little, depending on the job. Ventilation keeps it to a minimum.

Do you charge for travel?

No. Our quotes include travel, and we charge the same wherever you are.

What areas do you cover?

All of Buckinghamshire, and the rest of the UK. Travel is included in the price.

Do you work in Penn?

Yes. We cover the whole UK and travel to Penn and the rest of Buckinghamshire. Send us pictures for a fixed quote, or call 0345 017 0787.

How much does non-slip bath coating cost in Penn?

The exact price depends on the damage, so we quote from photos. You know the full cost before anything is booked.

What happens if you find more damage?

We will show you and explain before doing anything extra. Nothing extra is done without your say-so.

Is it worth repairing rather than replacing?

Generally, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. We’ll tell you honestly if replacement makes more sense.

Are you a vetted contractor?

Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.

Landlord and trade work in Penn

Rental properties take more wear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.

Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.

The process

Nothing needs to be moved out of the room. Everything we use comes in the van with us, lay protective sheets and get going once we have agreed what we are doing. It normally takes a morning or an afternoon, and you can get on with other things while we’re there.

  1. We start by degreasing the area where you stand.
  2. The area to be treated is masked out.
  3. We apply the clear textured coating.
  4. The masking comes off to leave a neat edge.
  5. The coating is left to cure before use, usually overnight.

How to prepare

  • Let us know about parking or access
  • Keep pets and children out of the room while we work
  • Let the surface dry out before the visit

How to get a price

For most jobs, photos are all we need to give you a price. Tell us what happened and where you are, and we will reply with a fixed quote and the earliest dates we have.

Get a fixed price

Related advice

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.