Surrey · England

Non-Slip Bath Coating in Penny Pot

Non-slip bath coating in and around Penny Pot: a fixed quote from pictures, a tidy visit and a one-year guarantee.

  • A bath or tray that is slippery when wet
  • Safety for older or less mobile people
  • Worn-out textured areas
Surface Doctor technician refinishing the outside of a roll-top bath

Non-slip bath coating in Penny Pot

Repair or replace in Penny Pot?

Instead, you could go for replacing the bath or tray with a textured one, or relying on a mat that needs lifting and cleaning. A coating treats your existing bath or tray. We charge the same wherever you are, so there’s no premium for Penny Pot. What changes the price is the job itself: the material, the amount of damage and how many items.

Why Penny Pot customers choose us

  • A fixed quote before booking
  • No need to remove anything
  • Honest advice, even when it means no job
  • Technicians who travel to you, UK-wide

See our full price list.

Non-slip bath coating at your home in Penny Pot

It’s popular with older people, families and holiday lets. It’s a clear, textured coating, so it shows only as a slightly matt area where you stand. Our repair technicians work on acrylic baths, resurfaced baths and wet room floors (ask us), and the jobs we see most are worn-out textured areas and bath mats that harbour mould or get forgotten.

You’re covered for a year from the day of the repair. Just call us if there is a problem and we’ll come back. A soft brush and mild cleaner keep it clean. Don’t use abrasive pads on the textured area.

Where
Penny Pot (GU24)
Region
Surrey
Guarantee
12 months on all our work
Quote
Fixed and free, based on photos
Call
0345 017 0787
Last updated
23 October 2026
Stained shower tray resurfaced to clean white, before and after

How it works

Expect a friendly, tidy visit. We agree the arrival time in advance, cover and mask the work area, then carry out the work, which normally takes a few hours. If we find something your photos didn’t show, we will explain it before carrying on.

  1. We start by degreasing the area where you stand.
  2. Next we mask off the area.
  3. We put on the clear non-slip coating.
  4. The masking comes off to leave a neat edge.
  5. The coating is left to cure before use, typically overnight.

How to prepare

  • Let us know which floor the room is on
  • Let us know about parking or access
  • Tell us about any previous repairs or coatings

How to get a price

To get a price, send two or three pictures through our quote form or call us. We’ll say straight away whether it can be repaired.

Get a free quote

Related advice

DIY repairs versus a professional job

It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and the old filler has to come out before a proper repair.

For a hairline mark somewhere you will never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.

Penny Pot and the surrounding area

Penny Pot is about 3 miles north-west of Woking, in Surrey. We travel to clients in Penny Pot and nearby villages, so there’s no workshop to go to. Penny Pot is one of 395 places in Surrey where we work. We work right across the region, from Penny Pot to London (25 miles away).

All of GU24 is within our area. Nearby, we also work in Castle Green (1 mile south-east), West End (1 mile west), Coxhill Green (1 mile north-east), Chobham (1 mile north-east) and Bisley (1 mile south-west). Larger places within reach include Guildford (7 miles south), Woking (3 miles south-east), Camberley (5 miles west), Epsom (15 miles east), Farnham (12 miles south-west) and Egham (7 miles north-east).

Near you in Penny Pot

In Penny Pot, that means homes near Church of St Lawrence, The Sun Public House and Gordon's School. Other local landmarks include Holy Trinity CofE Primary School (0.6 miles west) and Milford Green and Coxhill Green (1.4 miles east). For rail, the closest station is Brookwood station, roughly 2.7 miles south of the centre. Other landmarks nearby include Brookwood Hospital (1.8 miles south) and The Peacocks (3 miles south-east). The countryside around Penny Pot includes Virginia Water Lake and Gracious Pond.

Map of Penny Pot © OpenStreetMap contributors

How we price non-slip bath coating

A fixed quote means you know the cost before booking. We take into account:

  • How easy the damage is to reach
  • Previous DIY repairs that have to come out
  • The material
  • Whether we combine several jobs

Compared with replacing, repairing typically costs far less, because there’s no removal, plumbing or making good. Your fixed quote shows exactly what’s included.

How to get a fixed price

Before you send photos, a few simple things make all the difference:

  • One picture of the whole bath or shower tray
  • Where you are, by postcode
  • Natural light rather than flash
  • A clear, close picture of the problem area

If you’re in Penny Pot and want a price, the easiest route is pictures: a close-up, a wider shot and your postcode. You’ll get a fixed quote with dates to choose from.

Signs you need non-slip bath coating in Penny Pot

Baths and trays are made smooth so they’re easy to clean, yet wet, soapy surfaces are slippery. The textured patch on an older bath also wears down over time.

Typical reasons for a call-out include:

  • Resurfaced baths that are now too smooth
  • Safety for older or less mobile people
  • Worn-out textured areas
  • A bath or tray that is slippery when wet

Questions to ask before you book

  • What protection goes down before work starts
  • How to care for the finish
  • Whether the price covers travel
  • Is the price fixed, and does it include VAT?

Our hiring checklist

FAQs for Penny Pot

Do you come to Penny Pot?

Yes. We cover the whole UK and come to Penny Pot. Send pictures and we will quote, or call 0345 017 0787.

I’m a tenant. Can you help?

Of course. Check with your landlord; we can send the quote to them too.

Which areas do you work in?

Across the UK, and that includes Penny Pot. Our prices are the same everywhere.

Is a non-slip bath easy to clean?

Yes. A soft brush and mild cleaner is all it needs.

Is repairing better than replacing?

Usually, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. If replacing would be better, we will say so.

Can you do more than one item on the same visit?

Yes, and it’s frequently cheaper. Send pictures of everything together and we’ll quote them together.

How soon can you come?

It depends on the time of year and where you are. We’ll offer you dates when we send your quote.

Can you quote from pictures?

In nearly every case. If pictures do not show enough, we will ask for another angle.

Landlord and trade work in Penny Pot

Housing associations and facilities teams use us for planned and reactive repairs. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.

We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We hold CHAS, Constructionline and SafeContractor accreditations.

When we would advise against a repair

We’d rather lose a job than do one that won’t last, so these are the limits:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

If in doubt, send photos and we’ll say what we think before you book.

Materials we repair

  • Shower trays
  • Resurfaced baths
  • Acrylic baths
  • Wet room floors (ask us)
  • Enamelled baths
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.