Bury · England
Non-Slip Bath Coating for Pilsworth homes
Non-slip bath coating in Pilsworth without the cost of replacing. Send us pictures for a fixed quote, then book a visit.
- Resurfaced baths that are now too smooth
- Worn-out textured areas
- Safety for older or less mobile people
Do you need non-slip bath coating in Pilsworth?
Smooth surfaces are easy to clean, yet with soap and water on them they become slippery. Textured areas on older baths wear smooth too.
Typical reasons for a call-out include:
- Worn-out textured areas
- A bath or tray that is slippery when wet
- Resurfaced baths that are now too smooth
- Bath mats that harbour mould or get forgotten
Before you book anyone
- Whether the colour is mixed to match
- Whether a trained technician does the job
- How to care for the finish
- What happens if they find more damage
About our non-slip bath coating in Pilsworth
It’s a clear, textured coating, so it shows only as a slightly matt area where you stand. It suits homes with older or less mobile people, holiday lets and families. If you are dealing with resurfaced baths that are now too smooth and safety for older or less mobile people, we can usually put it right, whatever the material.
The work is covered for a year after we finish. If anything isn’t right, ring us and we will sort it. Clean with a soft brush and a mild cleaner. Do not use abrasive pads on the textured area.
- Location
- Pilsworth (BL9)
- Area hub
- Bury
- Warranty
- A year, on every repair
- Quote
- Fixed and free, based on photos
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Also in Pilsworth
Work for landlords and builders
Hospitality businesses need rooms back in use quickly, so we keep visits short and tidy. We can work around your bookings.
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting. We are CHAS, Constructionline and SafeContractor accredited.
How we price non-slip bath coating
You will know the full cost before you book. We look at:
- Any earlier repairs that need removing first
- Whether it’s a chip, crack, burn or wear
- Access to the area
- How much damage there is
Set against the cost of replacement, repairing usually costs far less, because nothing has to be taken out, refitted or made good. The quote lists exactly what you are paying for.
How to get a fixed price
Two or three clear photos are generally enough. Try to include:
- What it’s made of, if you know
- A coin beside the damage so we can judge size
- Daylight if possible, and no flash reflection
- A wider photo showing the whole bath or shower tray
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job.
Repairing versus replacing in Pilsworth
Instead, you could go for a new textured bath or tray, or relying on a mat, which traps water and needs cleaning. A non-slip coating treats your existing bath or tray. A repair usually costs much less than people expect, particularly next to the cost of replacement. Send photos and we will give you the exact figure.
Why choose Surface Doctor in Pilsworth
- We will tell you if it’s not worth repairing
- CHAS, Constructionline and SafeContractor accredited
- Dust sheets down, tidy finish
- No extra charge for your area
See our full price list.
Pilsworth questions
Do I need to be at home?
We need someone to let us in. After that, you can carry on with your day.
What happens once I’ve sent pictures?
You get a fixed price and available dates. If anything’s unclear, we’ll ask for another photo.
Is it messy?
No. The work area is masked and covered, and we take our waste away with us.
Do you work for landlords and businesses?
Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses.
Is a non-slip bath easy to clean?
Yes. A soft brush and mild cleaner is all it needs.
Is it worth repairing rather than replacing?
Usually, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. If replacing would be better, we’ll say so.
What happens if you find more damage?
The price is fixed for what the photos show. Anything extra is discussed before we begin.
What does non-slip bath coating cost?
The exact price depends on the damage, so we quote from pictures. You will get a fixed figure before you book.
Where we work around Pilsworth
Pilsworth is about 1 mile south-east of Gigg, in Bury. We visit homes and businesses in Pilsworth and the surrounding area, so nothing has to leave your home. We work in all 40 towns and villages in Bury, from the larger towns to small villages. We work right across the region, from Pilsworth to Manchester (about 7 miles away).
Here we cover the BL9 postcode area. From Aviation Road, Pilsworth Road and Roach Bank Road or anywhere nearby, we can come to you. Neighbouring places we cover include Gigg (1 mile north-west), Fishpool (1 mile north-west), Unsworth (1 mile south), Darnhill (2 miles north-east) and Whitefield (2 miles south). Within a short drive, we also cover Prestwich (4 miles south), Ramsbottom (5 miles north-west), Tottington (4 miles north-west), Brandlesholme (3 miles north-west), Greenmount (4 miles north-west) and Stoneclough (4 miles south-west).
What’s near Pilsworth
Our clients here include homes close to Hollins Grundy Primary School, Holy Cross College and Queen Anne pub and the streets around them. Pilsworth’s nearest station is Clifton station, roughly 4.1 miles south. Nearby you will also find Bealey Community Hospital (1.6 miles south-west) and The Fusilier Museum (1.3 miles north-west). The countryside around Pilsworth includes Nob End.
How the visit works
When we visit, we arrive at the time we’ve agreed, cover the area with dust sheets and masking, and set to work. Expect it to take a few hours. We tidy up before we leave and let you know when you can use it again.
- First the standing area is cleaned and degreased.
- The area to be treated is masked out.
- The clear textured coating is applied.
- We lift the masking for a clean edge.
- The coating is left to cure before use, typically overnight.
How to prepare
- Let us know which floor the room is on
- Keep children and pets away from the room on the day
- Make sure the area is dry
Getting a price
Upload a photo of the damage and one of the entire item, with your BL9 postcode, and we’ll come back with a fixed quote.
Advice
DIY repairs versus a professional job
A DIY attempt isn’t a disaster. We remove the old filler and start again, so it will not stop us repairing it. Just mention it when you send photos, as it can add time.
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
When a repair isn’t the answer
A repair isn’t right for every job, for example:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
If in doubt, send photos and we will say what we think.
Materials we repair
- Wet room floors (ask us)
- Acrylic baths
- Resurfaced baths
- Shower trays
- Enamelled baths
About our accreditations · Every repair comes with a one-year guarantee.
