Swansea · Wales
Non-Slip Bath Coating for Plasmarl homes
Our technicians come to Plasmarl for clear non-slip coatings for baths and shower trays. Nothing is taken out, with a one-year guarantee.
- Safety for older or less mobile people
- Worn-out textured areas
- A bath or tray that is slippery when wet
About our non-slip bath coating in Plasmarl
It suits homes with older or less mobile people, holiday lets and families. It’s a clear, textured coating, so it shows only as a slightly matt area where you stand. If you’re dealing with bath mats that harbour mould or get forgotten and worn-out textured areas, we can usually put it right, on acrylic baths, wet room floors (ask us) and enamelled baths alike.
The work is covered for a year after we finish. Just call us if there’s a problem and we’ll come back. A soft brush and mild cleaner keep it clean. Do not use abrasive pads on the textured area.
- Where
- Plasmarl (SA6, SA1, SA5)
- County
- Swansea
- Cover
- One year on every repair
- Quote
- Free and fixed, from your pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
For landlords and businesses
We regularly work with letting and managing agents. Just send pictures, the address and how to get access and we will arrange it.
For developers and builders, we fix damage before handover, saving last-minute replacements. We can visit several plots in one trip.
Where we work around Plasmarl
Plasmarl is about 1 mile south of Morriston, in Swansea. We agree a date that works for you, and we will give you an arrival time in advance, so there is no waiting around. Our technicians cover 153 places across Swansea, from the larger towns to small villages.
We work across SA6, SA1 and SA5 and the streets around it. You’ll find streets such as Parc Road, Salem Road and Neath Road. Neighbouring places we cover include Graig Trewyddfa (1 mile north-east), Trewyddfa (1 mile north-west), Morfa (1 mile south-west), Waun-gron (1 mile west) and Treboeth (1 mile west). We also work in nearby towns such as Gorseinon (5 miles west), Cwm Gwyn (3 miles south-west), Llwchwr (5 miles west), Mumbles (5 miles south-west), Norton (6 miles south-west) and Tycoch (3 miles south-west).
Landmarks near Plasmarl
Our customers here include homes close to Plasmarl Primary School, Bishop Vaughan R.C. School and Silver Dollar pub. Other local landmarks include Cwm Level Park (0.5 miles south-west) and St Paul's Church (within half a mile south-west). Plasmarl’s nearest station is Swansea station, roughly 1.7 miles south of the centre. Nearby you will also find St. David's Shopping Centre (2.3 miles south) and Mount Pleasant Hospital (1.9 miles south-west). Not far away are Pluck Lake and Cnap-llwyd.
Your questions about non-slip bath coating in Plasmarl
Can you do more than one item on the same visit?
Yes. Doing several items on one visit generally costs less than separate visits. Include pictures of each item.
Do you cover Plasmarl?
Yes, we do. We send a technician to Plasmarl for every job, and the price is the same as everywhere else.
Do you cover the whole of Swansea?
The whole UK, including all of Swansea. Just include your postcode and we’ll offer you dates.
Do you charge for travel?
We do not add a call-out fee. Your fixed price includes everything.
What happens once I’ve sent photos?
You will get a fixed quote back. You are under no obligation.
Are you accredited?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
I’m a tenant. Can you help?
We’re happy to deal with the tenant, landlord or agent. Get your landlord’s agreement first.
Is it safe with children and pets around?
Yes, as long as they stay out of the room we are working in. We will tell you when the room can be used again.
When a repair is not the answer
Not everything can be repaired, and we will tell you before we start. Repairs will not solve:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
Not sure? Send pictures and we’ll give you a straight answer before you book.
What we work on
- Shower trays
- Enamelled baths
- Resurfaced baths
- Acrylic baths
- Wet room floors (ask us)
The process
On the day, we arrive at the time we’ve agreed, cover the area with dust sheets and masking, and set to work. Expect it to take a few hours. We clean up when we’re done and let you know when you can use it again.
- We start by degreasing the area where you stand.
- We mask out the area to be treated.
- We put on the clear non-slip coating.
- We lift the masking for a clean edge.
- We leave it to cure, generally overnight.
How to prepare
- Let the surface dry out before the visit
- Move bottles, mats and clutter away from the area
- Mention any earlier repairs or resurfacing
How to get a price
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath or shower tray, include your postcode and send them over. You’ll get a fixed price, not an estimate.
Related advice
What non-slip bath coating costs
Prices are worked out job by job, from your pictures. What matters most is:
- How much damage there is
- Whether old repairs or coatings need taking off
- Where the damage is and how we get to it
- The type of damage
Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Photos let us give you the exact figure.
Send photos for a quote
Most quotes are done from pictures alone. To help us price it:
- A clear, close picture of the problem area
- Details of any past repairs
- What it’s made of, if you know
- Natural light rather than flash
For most jobs, photos are all we need to give you a price. Tell us what happened and where you are, and we will send back a fixed quote and some dates.
DIY kit or professional repair?
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is generally cheaper.
DIY kits are sold for most surfaces, and they can make a small mark look better. The trouble is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair won’t last.
Should you replace it?
The alternatives are a new textured bath or tray, or a bath mat that needs lifting and cleaning. A coating treats your existing bath or tray. It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Send pictures and you’ll get a fixed figure.
Why Plasmarl clients choose us
- Nothing taken out or refitted
- No extra charge for your area
- Dust sheets down, tidy finish
- Accredited with CHAS, Constructionline and SafeContractor
Take a look at our pricing.
Other services in Plasmarl
When to call us in Plasmarl
Baths and trays are made smooth so they’re easy to clean, yet with soap and water on them they become slippery. Textured areas on older baths wear smooth too.
The most common problems we are called about are:
- Bath mats that harbour mould or get forgotten
- A bath or tray that is slippery when wet
- Safety for older or less mobile people
- Resurfaced baths that are now too smooth
Comparing quotes
- What the guarantee covers, and for how long
- A fixed quote, and whether VAT is included
- Whether cleaning and preparation are in the price
- Whether there are any call-out or travel charges
About our accreditations · Every repair comes with a one-year guarantee.
