Swansea · Wales

Non-slip bath & shower coating in Morfa, Swansea

Non-slip bath coating in and around Morfa: photo quotes, tidy work and a year’s guarantee.

  • Worn-out textured areas
  • Safety for older or less mobile people
  • A bath or tray that is slippery when wet
Surface Doctor technician refinishing the outside of a roll-top bath

Non-slip bath coating for Morfa homes

When we’d advise against a repair

Some jobs aren’t right for a repair, for example:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

Not sure? Send photos and we will give you a straight answer before you book.

What we work on

  • Wet room floors (ask us)
  • Resurfaced baths
  • Shower trays
  • Enamelled baths
  • Acrylic baths

Non-slip bath coating at your home in Morfa

The coating is clear and textured, so the bath looks much the same. It suits homes with older or less mobile people, holiday lets and families. Common call-outs are for resurfaced baths that are now too smooth and worn-out textured areas, in resurfaced baths, enamelled baths and shower trays.

The work is covered for a year after we finish. If anything is not right, ring us and we’ll sort it. A soft brush and mild cleaner keep it clean. Avoid scourers on the coating.

Discoloured square shower tray restored with a new white finish
Location
Morfa (SA1, SA5, SA6)
Area hub
Swansea
Guarantee
12 months on all our work
Quotes
Free, fixed quote from pictures
Call
0345 017 0787
Updated
23 October 2026

What affects the price in Morfa

We give every job a fixed quote from pictures. This is what makes a difference:

  • How many areas need work
  • How many items we do on one visit
  • Unusual colours or finishes
  • Whether it’s a chip, crack, burn or wear

Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Photos let us give you the exact figure.

Send pictures for a quote

The better the photos, the more accurate the price. Here’s what we find most useful:

  • A photo taken from further back
  • Any earlier repairs or coatings
  • A coin beside the damage so we can judge size
  • The material, if you know it

Getting a price is easy: snap the damage close up and then the whole item, send them to us with your postcode, and we will reply with a fixed price. There is no charge for the quote and you’re under no obligation.

Where we work around Morfa

Morfa is about 1 mile north-east of Swansea, in Swansea. Wherever you are in the SA1 postcode area, we come to you. Our repair technicians cover all 153 towns and villages in Swansea.

Every address in SA1, SA5 and SA6 is covered. Jobs here include addresses on Siloh Road, Eaton Road and Salem Road. We also cover the places around Morfa: Landore (1 mile south), Penfilia (1 mile north-west), Brynhyfryd (1 mile west), Plasmarl (1 mile north-east) and Lisbon (1 mile north-west). Larger places within reach include Gorseinon (5 miles west), Llwchwr (5 miles west), Mumbles (5 miles south-west), Norton (5 miles south-west), Tycoch (3 miles south-west) and Clydach (4 miles north-east).

Around Morfa

We visit homes around Pentrehafod School, Brynhyfryd Primary School and Siloh Welsh Congregational Chapel, among other places. Also close by are Dynevor School (1.5 miles south), Cwm Level Park (under half a mile north) and The Station Inn (under half a mile west). For rail, the closest station is Swansea station, roughly 1.2 miles south of the centre. Nearby you will also find Mount Pleasant Hospital (1.3 miles south) and Original Swansea Castle (1.5 miles south). Green spaces nearby include Cnap-llwyd and Pluck Lake.

Map of Morfa © OpenStreetMap contributors

Work for landlords and builders

We carry out planned and one-off repairs for housing associations and facilities teams. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.

We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover so nothing needs replacing. We are CHAS, Constructionline and SafeContractor accredited.

Should I try a DIY kit first?

A DIY attempt isn’t a disaster. We remove the old filler and start again, so it doesn’t stop a professional repair. Just mention it when you send photos, as it can add time.

A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.

Do you need non-slip bath coating in Morfa?

Smooth surfaces are easy to clean, yet with soap and water on them they become slippery. Textured areas on older baths wear smooth too.

These are the problems we are asked about most:

  • Resurfaced baths that are now too smooth
  • Safety for older or less mobile people
  • A bath or tray that is slippery when wet
  • Bath mats that harbour mould or get forgotten

Before you book anyone

  • Whether the price covers travel
  • The length of the guarantee and what it covers
  • How soon you can use it again
  • Whether the price is fixed and includes VAT

Choosing a repair company

Should you replace it?

Instead, you could go for a new textured bath or tray, or a bath mat, which traps water and needs cleaning. A non-slip coating adds grip to the bath you have. It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.

Why book with us

  • Free fixed quotes from pictures
  • Repair technicians who travel to you, UK-wide
  • Accredited with CHAS, Constructionline and SafeContractor
  • One-year guarantee on every repair

See our full price list.

FAQs for Morfa

Will a non-slip coating change how my bath looks?

Very little: it shows as a matt area where you stand.

Will it make a mess?

We protect the room with dust sheets and masking first, and we clean up when we have finished.

Can you price it without visiting?

Usually, yes. A close-up and a wider photo are enough to give a fixed quote.

It’s been repaired before. Can you still fix it?

Most of the time. Tell us what was done before and we will plan for it.

Do you come to Morfa?

Yes. We work across the UK and travel to Morfa. Send pictures and we will quote, or call 0345 017 0787.

Is it OK to have pets in the house?

On the day, the room should be kept clear of pets and children, mainly so nothing gets touched before it has cured.

Can tenants book a repair?

We can work for tenants, landlords or agents. Get your landlord’s agreement first.

What happens once I’ve sent photos?

We check the damage, the material and your postcode, then reply with a quote and the next dates we have.

How it works

You don’t need to empty the room. We bring everything we need with us, lay protective sheets and start once you’re happy with the plan. Most jobs take a morning or an afternoon, and you are welcome to carry on with your day while we work.

  1. We clean and degrease the standing area.
  2. The area to be treated is masked out.
  3. We put on the clear non-slip coating.
  4. The masking comes off to leave a neat edge.
  5. Once it has cured, normally overnight, it’s ready.

How to prepare

  • Tell us if there are stairs or a lift
  • Move bottles, mats and clutter away from the area
  • Keep pets and children out of the room while we work

Ask for a price

If you’re in Morfa and want a price, the easiest route is photos: a close-up, a wider shot and your postcode. You will get a fixed quote with dates to choose from.

Get a free quote

Related advice

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.