Essex · England

Non-Slip Bath Coating in Pleshey

Non-slip bath coating across Pleshey and nearby, generally in one visit and guaranteed for a year.

  • A bath or tray that is slippery when wet
  • Bath mats that harbour mould or get forgotten
  • Resurfaced baths that are now too smooth
Surface Doctor technician refinishing the outside of a roll-top bath

Book non-slip bath coating in Pleshey

Your questions about non-slip bath coating in Pleshey

Is it messy?

Very little mess: we sheet and mask everything nearby, and we leave the room clean.

Will a non-slip coating change how my bath looks?

Very little: it shows as a matt area where you stand.

Is the work guaranteed?

Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.

What information do you need?

Use the quote form or ring 0345 017 0787, and we will do the rest.

Can landlords book you?

Yes. We work for landlords, agents, builders and businesses as well as homeowners across Essex.

Can you redo someone else’s repair?

Usually, yes. We remove the old repair before doing a new one, so let us know about it.

Do you hold any accreditations?

Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.

Do you work in Pleshey?

Yes. We work across the UK and travel to Pleshey. Send us photos for a fixed quote, or call 0345 017 0787.

Non-slip bath coating in Pleshey, done in place

It suits older people, families and holiday lets. It’s a clear, textured coating, so it shows only as a slightly matt area where you stand. We regularly repair wet room floors (ask us), resurfaced baths and enamelled baths, and the jobs we see most are worn-out textured areas and resurfaced baths that are now too smooth.

You get a one-year guarantee, the same in Pleshey as everywhere else we work. A soft brush and mild cleaner keep it clean. Don’t use abrasive pads on the textured area.

Before and after: an old shower tray refinished by Surface Doctor
Location
Pleshey (CM3)
County
Essex
Cover
One year on every repair
Quotes
Free and fixed, from your photos
Telephone
0345 017 0787
Page updated
23 October 2026

DIY repairs versus a professional job

You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair won’t last.

If you’re set on a kit, follow its instructions closely, and don’t use it until it has fully cured. If it doesn’t work out, we can still repair it properly.

Repair or replace: which is better?

Instead, you could go for replacing the bath or tray with a textured one, or relying on a mat that needs lifting and cleaning. A non-slip coating treats your existing bath or tray. We don’t add extras on the day. What we quote from your pictures is what you pay, and if the damage turns out to be different, we discuss it before starting.

Why Pleshey customers choose us

  • Usually one visit, start to finish
  • Technicians who travel to you, UK-wide
  • CHAS, Constructionline and SafeContractor accredited
  • Free fixed quotes from pictures

Read our full price list.

When we would advise against a repair

A repair is not always the answer, and we’d rather say so up front. Repairs will not solve:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

Not sure? Send pictures and we’ll give you a straight answer.

Materials we repair

  • Acrylic baths
  • Shower trays
  • Wet room floors (ask us)
  • Enamelled baths
  • Resurfaced baths

Landlords, agents and businesses in Pleshey

Housing associations and facilities teams use us for planned and reactive repairs. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.

For anyone letting property in or around Pleshey, we can repair and quote for several addresses together. Send photos for each one and we will come back with a combined price.

What non-slip bath coating costs

We give every job a fixed quote from pictures. These are the things that affect it:

  • What kind of damage it is
  • How hard the colour is to match
  • Access to the area
  • Doing more than one item at once

A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send photos and you’ll get a fixed figure.

How to get a fixed price

You can take the photos on your phone, there is no need for anything special. Just ensure we can see:

  • Any earlier repairs or coatings
  • Daylight if possible, and no flash reflection
  • Something in shot to show the size
  • A clear, close picture of the problem area

The quickest way to a price is to send a couple of pictures through our quote form or call us. We will say right away whether it can be repaired.

What we do, step by step

We turn up when we said we would and looks over the damage before anything else. Dust sheets and masking tape go down before we open a single tin. The work itself takes a morning or an afternoon, and we leave the room as we found it.

  1. We start by degreasing the area where you stand.
  2. We mask out the area to be treated.
  3. We put on the clear non-slip coating.
  4. The masking comes off to leave a neat edge.
  5. We leave it to cure, typically overnight.

Before we arrive

  • Have a window or extractor fan available
  • Mention any earlier repairs or resurfacing
  • Mention if the room is upstairs or in a flat

How to get a price

Pricing is simple: snap the damage close up and then the entire item, send them over with your postcode, and you’ll get a fixed quote back. There’s no charge for the quote and no obligation.

Send photos for a quote

Read more

Do you need non-slip bath coating in Pleshey?

Smooth surfaces are easy to clean, yet with soap and water on them they become slippery. Textured areas on older baths wear smooth too.

The things customers typically mention when they call include:

  • Worn-out textured areas
  • Bath mats that harbour mould or get forgotten
  • A bath or tray that is slippery when wet
  • Resurfaced baths that are now too smooth

Comparing quotes

  • What happens if they find more damage
  • What aftercare is recommended
  • What protection goes down before work starts
  • Whether there are any call-out or travel charges

How to compare quotes

Our work in Pleshey

Pleshey is about 6 miles north-west of Chelmsford, in Essex. We agree a date that works for you, and we’ll give you an arrival time in advance, so you are not left waiting in all day. We cover all 644 towns and villages across Essex, from the larger towns to small villages. Our jobs stretch from Pleshey to London (about 30 miles away).

Here we cover the CM3 postcode area. Local streets include The Street, Back Lane and Woolmers Mead, all of which we cover. Other places close to Pleshey include Ford End (2 miles north-east), Howe Street (2 miles east), Hartford End (2 miles north-east), North End (3 miles north) and Chatham Green (3 miles east). Further out, we also cover Chelmsford (6 miles south-east), Braintree (8 miles north-east), Harlow (13 miles west), Brentwood (13 miles south), Maldon (13 miles south-east) and Billericay (12 miles south).

Local landmarks in Pleshey

Our clients here include homes close to The Leather Bottle Public House and Church of Holy Trinity. Well-known places in the area include Broomfield Hospital (3.1 miles south-east). The countryside around Pleshey includes Little Waltham Meadows.

Map of Pleshey © OpenStreetMap contributors
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.