Flintshire · England

Non-slip bath & shower coating in Pontybodkin, Flintshire

Non-slip bath coating across Pontybodkin and nearby, generally in one visit and guaranteed for a year.

  • Worn-out textured areas
  • Bath mats that harbour mould or get forgotten
  • A bath or tray that is slippery when wet
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted non-slip bath coating in Pontybodkin

Non-slip bath coating in Pontybodkin without replacing anything

It’s a clear, textured coating, so it shows only as a slightly matt area where you stand. It suits homes with older or less mobile people, holiday lets and families. Typical jobs include a bath or tray that is slippery when wet and resurfaced baths that are now too smooth, across enamelled baths, wet room floors (ask us) and resurfaced baths.

Peace of mind is built in: our one-year guarantee applies to every job, and we explain what it covers before booking. A soft brush and mild cleaner keep it clean. Do not use abrasive pads on the textured area.

Where
Pontybodkin (CH7)
County
Flintshire
Guarantee
A year, on every repair
Quote
Free and fixed, from your photos
Telephone
0345 017 0787
Updated
23 October 2026
Stained shower tray resurfaced to clean white, before and after

Landlords, agents and businesses in Pontybodkin

For anyone letting property in or around Pontybodkin, we will quote for several properties at once. Just send photos for each address and we will come back with a combined price.

Landlords, letting agents and housing providers in Pontybodkin use us as well as householders. Repairing between tenancies keeps void periods short, and it usually costs far less than a refit.

Do you need non-slip bath coating in Pontybodkin?

Baths and trays are made smooth so they’re easy to clean, yet with soap and water on them they become slippery. The textured patch on an older bath also wears down over time.

Look out for any of the following:

  • Worn-out textured areas
  • Bath mats that harbour mould or get forgotten
  • A bath or tray that is slippery when wet
  • Safety for older or less mobile people

What your quote should include

  • Whether the price is fixed and includes VAT
  • Aftercare advice
  • How long the guarantee is and what it covers
  • Who will actually do the work

Choosing a repair company

Why repair rather than replace?

Instead, you could go for a new textured bath or tray, or relying on a mat, which traps water and needs cleaning. A coating adds grip to the bath you have. The price depends on the type and amount of damage, what it’s made of and how many jobs we combine into one visit. You get a fixed quote from your pictures, so you know the cost before booking.

Why Pontybodkin clients choose us

  • Normally one visit, start to finish
  • Free fixed quotes from pictures
  • One-year guarantee on every repair
  • We’ll tell you if it’s not worth repairing

See our prices page.

Should I try a DIY kit first?

If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send pictures.

The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.

When a repair is not the answer

A few problems are outside what a surface repair can do:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

Send us photos and we will tell you honestly.

Surfaces we repair

  • Acrylic baths
  • Shower trays
  • Enamelled baths
  • Resurfaced baths
  • Wet room floors (ask us)

What non-slip bath coating costs

There’s no area surcharge for Pontybodkin. The price reflects:

  • What kind of damage it is
  • Whether we combine several jobs
  • Previous DIY repairs that have to come out
  • The size and number of damaged areas

We don’t add extras on the day. What we quote from your photos is what you pay, unless the damage turns out to be different, in which case we talk to you first.

How to get a fixed price

The better the photos, the more accurate the price. Here’s what we find most useful:

  • A wider photo showing the whole bath or shower tray
  • Daylight if possible, and no flash reflection
  • Where you are, by postcode
  • What it’s made of, if you know

Email us photos of the damage and a wider shot of the whole item, and tell us you are in Pontybodkin, and we’ll come back with a fixed quote.

The process

On the day, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. Expect it to take a few hours. We tidy up before we leave and let you know when you can use it again.

  1. We clean and degrease the standing area.
  2. We mask out the area to be treated.
  3. We apply the clear textured coating.
  4. We remove the masking for a neat edge.
  5. Once it has cured, normally overnight, it’s ready.

Preparing for the visit

  • Let us know if it has been repaired before
  • Make sure the room can be ventilated
  • Clear the area around the damage

Get a quote

Getting a quote takes a couple of minutes: photograph the damage, then the entire bath or shower tray, add your postcode and send them to us. You will get a fixed price, not an estimate.

Send pictures for a quote

Related advice

Pontybodkin questions

Does someone need to be in?

Someone needs to let us in and show us the job. You don’t need to watch us work.

Can you do more than one item on the same visit?

Of course, and it normally saves money. Send pictures of everything together and we’ll quote them together.

Is my repair covered?

Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.

Are you a vetted contractor?

We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.

What do you need from me?

A close-up, a wider photo and your postcode. After that, we just agree a date.

Do the materials smell?

A little, depending on the job. Ventilation keeps it to a minimum.

How do I get a price for non-slip bath coating in Pontybodkin?

Every job gets a fixed price based on photos of the damage. Send a close-up of the damage and a wider photo and your postcode.

I’m a tenant. Can you help?

Yes, though it’s best to check with your landlord first. Landlords are often glad to have it sorted before the end of a tenancy.

About Pontybodkin

Pontybodkin is about 3 miles south of Bwcle, in Flintshire. We travel to clients in Pontybodkin, so there is no workshop to go to. Pontybodkin is one of 139 places in Flintshire where we work. We work right across the region, from Pontybodkin to Liverpool (about 21 miles away).

Here we cover the CH7 postcode area. We regularly work on streets such as Corwen Road, Ffordd-y-Bont and Victoria Crescent and the roads around them. We also cover the places around Pontybodkin: Coed-talon (1 mile south-west), Coed-Llai (1 mile north), Pontblyddyn (1 mile north), Leeswood and Pontblyddyn (1 mile north) and Llanfynydd (1 mile south). Further out, we also cover Connah's Quay (6 miles north), Buckley (3 miles north), Bwcle (3 miles north), Flint (8 miles north), Saltney (8 miles north-east) and Mold (3 miles north-west).

Landmarks near Pontybodkin

Around Pontybodkin, we work in homes near Ysgol Derwenfa, Railway Inn and Castell Alun High School and the streets around them. For rail, the closest station is Penyffordd station, about 1.9 miles north-east. Nearby you will also find Twmpath Placename (1.1 miles west) and Mold Community Hospital (3.9 miles north-west). Not far away are Pen Pontblyddyn and Padeswood Pool.

Map of Pontybodkin © OpenStreetMap contributors
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.