Aberdeenshire · Scotland
Non-Slip Bath Coating in Port Henry
Our technicians come to Port Henry for clear non-slip coatings for baths and shower trays. Nothing is taken out, with a one-year guarantee.
- Resurfaced baths that are now too smooth
- Worn-out textured areas
- A bath or tray that is slippery when wet
About our non-slip bath coating in Port Henry
It suits homes with older or less mobile people, holiday lets and families. The coating is clear and textured, so the bath looks much the same. Whether it’s bath mats that harbour mould or get forgotten and safety for older or less mobile people, we can help, on shower trays, resurfaced baths and enamelled baths alike.
The work is guaranteed for twelve months. If there’s a problem with the repair within the year, we return and sort it. A soft brush and mild cleaner keep it clean. Do not use abrasive pads on the textured area.
- Area
- Port Henry (AB42)
- Region
- Aberdeenshire
- Cover
- A year, on every repair
- Quotes
- Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Questions from Port Henry
Can you do more than one item on the same visit?
Yes. Doing several items on one visit typically costs less than separate visits. Include pictures of each item.
What happens if you find more damage?
We’ll show you and explain before doing anything extra. You will not be charged for anything you haven’t agreed.
Can you repair something that’s been repaired before?
Yes, regularly. Removing the old work can add time, and that is in the quote.
What happens once I’ve sent photos?
We check the damage, the material and your postcode, then reply with a quote.
Do you do work for letting agents?
We do, regularly. We can quote for several properties together and work between tenancies.
Can I get a quote without a visit?
Nearly always. We only ask to see it in person if the photos can’t show what we need.
Is it worth repairing rather than replacing?
Usually, when the rest is in good condition. A repair avoids removal and making good. If replacing would be better, we’ll say so.
Can tenants book a repair?
Yes. Ask your landlord first, and we can send them the quote if that helps.
When to call us in Port Henry
Smooth surfaces are easy to clean, yet with soap and water on them they become slippery. The textured patch on an older bath also wears down over time.
These are the problems we are asked about most:
- A bath or tray that is slippery when wet
- Bath mats that harbour mould or get forgotten
- Safety for older or less mobile people
- Resurfaced baths that are now too smooth
Before booking anyone
- How soon you can use it again
- Whether there are any call-out or travel charges
- What aftercare is recommended
- How changes to the job are handled
What a repair can’t fix
We’d rather lose a job than do one that won’t last, so here’s what a repair can’t put right:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
If in doubt, send photos and we will say what we think before you book.
Materials we work on in Port Henry
- Wet room floors (ask us)
- Acrylic baths
- Enamelled baths
- Resurfaced baths
- Shower trays
Work for landlords and builders
If you manage property in Port Henry, we’ll quote for several properties at once. Send photos for each one and we will price them together.
We regularly price jobs from inventory or check-out photos. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
How it works
Your technician turns up when we said we would and checks the damage against your photos first. The floor and nearby surfaces are covered before we open a single tin. The work itself takes a few hours, and we leave the room as we found it.
- First the standing area is cleaned and degreased.
- Next we mask off the area.
- We put on the clear non-slip coating.
- We lift the masking for a clean edge.
- We leave it to cure, typically overnight.
How to prepare
- Make sure the room can be ventilated
- Ensure the area is dry
- Let us know about parking or access
Getting a price
You do not need a survey visit. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we’ll come back to you with a fixed figure.
Advice
What else we do in Port Henry
Should I try a DIY kit first?
You can buy a DIY kit for most repairs, and they can make a small mark look better. The trouble is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
Why repair rather than replace?
The alternatives are replacing the bath or tray with a textured one, or relying on a mat, which traps water and needs cleaning. A coating treats your existing bath or tray. We do not add extras on the day. What we quote from your pictures is what you pay, unless the damage turns out to be different, in which case we talk to you first.
What you get with us
- We will tell you if it’s not worth repairing
- Normally one visit, start to finish
- Free fixed quotes from pictures
- Every repair guaranteed for a year
Take a look at our full price list.
Prices and what affects them
We don’t charge extra for travel to Port Henry. The price depends on:
- How hard the colour is to match
- Doing more than one item at once
- The type of damage
- What the surface is made of
A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
How to get a fixed quote
You can take the photos on your phone, there is no need for anything special. Just ensure we can see:
- A clear, close picture of the problem area
- The material, if you know it
- Any earlier repairs or coatings
- A picture taken from further back
Send us photos of the damage and a wider shot of the entire item, with your AB42 postcode, and we will reply with a fixed quote.
Port Henry and nearby
Port Henry is about 1 mile east of Peterhead, in Aberdeenshire. Jobs in Port Henry are booked in like any other job: a fixed quote from pictures, and a technician at your door on the day. Port Henry is one of 161 places in Aberdeenshire where we work.
All of AB42 is covered, from the main roads to the quietest streets. Jobs here include addresses on Pool Lane, Love Lane and Park Lane and the roads around them. We also cover the places around Port Henry: Roanheads (1 mile north-west), Peterhead (1 mile west), Clerkhill (1 mile south-west), Buchanhaven (1 mile north-west) and Inverugie (2 miles west). Further out, we also cover Fraserburgh (15 miles north-west), Ellon (15 miles south-west), Mintlaw (9 miles west), Cruden Bay (7 miles south-west), Inverallochy (13 miles north-west) and Longside (6 miles west).
Near you in Port Henry
Typical jobs here are in homes near Peterhead and Union Bar. Other landmarks nearby include Keith Inch Castle (0.5 miles south) and HM Prison Peterhead (1.3 miles south). For a walk, there’s Meet Hill.
About our accreditations · Every repair comes with a one-year guarantee.
