Hertfordshire · England
Non-Slip Bath Coating in Potters Bar
Non-slip bath coating for Potters Bar, without a refit. Get a fixed quote from your pictures, then we come to you.
- Worn-out textured areas
- Resurfaced baths that are now too smooth
- Bath mats that harbour mould or get forgotten
About our non-slip bath coating in Potters Bar
It’s a clear, textured coating, so the bath looks much the same. It’s popular with older people, families and holiday lets. Whether it’s safety for older or less mobile people and resurfaced baths that are now too smooth, we can help, on acrylic baths, resurfaced baths and enamelled baths alike.
Every job is backed for twelve months. We return to put right any problem with the work. Clean with a soft brush and a mild cleaner. Don’t use abrasive pads on the textured area.
- Where
- Potters Bar (EN6)
- Region
- Hertfordshire
- Warranty
- 12 months on all our work
- Price
- Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Where we work around Potters Bar
Potters Bar is about 7 miles north of Finchley, in Hertfordshire. We work in every kind of home, old or new, large or small, plus businesses and rented homes. Our technicians cover all 381 towns and villages across Hertfordshire, from the larger towns to small villages. We work right across the region, from Potters Bar to London (about 14 miles away).
Our visits in EN6 work the same way as everywhere else we cover. Local streets include High Street, Church Road and The Walk, all of which we cover. Potters Bar sits on or near the A111 and B156, so getting to you is simple. If you’re just outside Potters Bar, we cover Bentley Heath (1 mile south-west), Northaw Valley (2 miles east), Hadley Wood (2 miles south), Monken Hadley (2 miles south) and Botany Bay (3 miles south-east). We also work in nearby towns such as Watford (10 miles west), Hemel Hempstead (13 miles west), Stevenage (15 miles north), St Albans (7 miles north-west), Welwyn Garden City (7 miles north) and Harpenden (11 miles north-west).
What’s near Potters Bar
Our clients here include homes close to Mount Grace School, St. Mary's Church and Ladbrooke Junior Mixed and Infant School. There is a railway station in Potters Bar itself: Potters Bar station. A little further out are Spires Shopping Centre (3 miles south) and Barnet General Hospital (3.4 miles south-west). The countryside around Potters Bar includes Furzefield Wood and Lower Halfpenny.
Questions from Potters Bar
How do I get a price for non-slip bath coating in Potters Bar?
Every job gets a fixed price from your photos. Send a close-up and a photo of the entire item and your postcode.
What happens if you find more damage?
If we find something the photos didn’t show, we explain it first. The price only changes if you agree.
Do I need to be at home?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
How do I clean it?
Yes. A soft brush and mild cleaner is all it needs.
Do you work for landlords and businesses?
We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.
Do you cover Potters Bar?
Yes, we do. Technicians travel to Potters Bar from across the region, and the price is the same as everywhere else.
Can you price it without visiting?
Usually, yes. A close-up and a wider photo are enough to give a fixed price.
Is there a guarantee?
Yes: twelve months. If there is a problem with the work in that time, we come back and put it right.
Also near Potters Bar
Also in Potters Bar
Landlord and trade work in Potters Bar
We carry out planned and one-off repairs for housing associations and facilities teams. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
We work for landlords, letting agents and housing providers in Potters Bar as well as homeowners. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
Honest limits
A repair is not always the answer, and we would rather say so up front. Repairs won’t solve:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
Send us photos and we’ll tell you honestly before you book.
Materials we work on in Potters Bar
- Shower trays
- Resurfaced baths
- Acrylic baths
- Wet room floors (ask us)
- Enamelled baths
Should I try a DIY kit first?
If you’re set on a kit, follow its instructions closely, and do not use it until it has fully cured. If it fails, we can still put it right.
If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it does not stop a professional repair. It does add a little time, so tell us about it when you send pictures.
Repair or replace: which is better?
Instead, you could go for a new textured bath or tray, or relying on a mat, which traps water and needs cleaning. A non-slip coating treats your existing bath or tray. It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Send pictures and you’ll get a fixed figure.
Why us?
- We leave the room as we found it
- One visit for most repairs
- Technicians who travel to you, UK-wide
- Every repair guaranteed for a year
See our pricing.
What affects the price in Potters Bar
We don’t charge extra for travel to Potters Bar. The price depends on:
- Where the damage is and how we get to it
- How much damage there is
- The material
- Previous DIY repairs that have to come out
Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Send pictures and we will give you the exact figure.
Send photos for a quote
We price nearly every job from photos. This is what we need:
- What it’s made of, if you know
- Any earlier repairs or coatings
- Where you are, by postcode
- A clear, close picture of the problem area
Most customers in Potters Bar get their price from photos. Tell us what happened and where you are, and we’ll send back a fixed quote and some dates.
When to call us in Potters Bar
Baths and trays are made smooth so they’re easy to clean, but wet, soapy surfaces are slippery. Textured areas on older baths wear smooth too.
Customers usually contact us about:
- Safety for older or less mobile people
- Resurfaced baths that are now too smooth
- Worn-out textured areas
- A bath or tray that is slippery when wet
What to look for in a quote
- What preparation is included
- What protection goes down before work starts
- Aftercare advice
- What happens if they find more damage
What we do, step by step
Arrival times are agreed in advance. Once we’re there, the work takes a few hours in most cases. We leave the room clean and you’ll know when it can be used.
- First the standing area is cleaned and degreased.
- Next we mask off the area.
- The clear textured coating is applied.
- We remove the masking for a neat edge.
- The coating is left to cure before use, generally overnight.
Before we arrive
- Clear toiletries, mats and anything else from around the area
- Mention any parking restrictions or tricky access
- Have a window or extractor fan available
How to get a price
A quote takes minutes to ask for: photograph the damage, then the whole bath or shower tray, add your postcode and send them over. What comes back is a fixed quote, not a guess.
Related advice
About our accreditations · Every repair comes with a one-year guarantee.
