Clackmannanshire · Scotland
Non-Slip Bath Coating for Powmill homes
Non-slip bath coating in and around Powmill: a fixed quote from pictures, a tidy visit and a one-year guarantee.
- Resurfaced baths that are now too smooth
- Safety for older or less mobile people
- Bath mats that harbour mould or get forgotten
What affects the price in Powmill
A fixed quote means you know the cost before you book. We look at:
- Access to the area
- How many items we do on one visit
- The type of damage
- The material and finish
The price reflects the work involved, not your postcode. The full price is agreed before booking, with no extras added later.
Quotes from your pictures
We price nearly every job from photos. This is what we need:
- A coin beside the damage so we can judge size
- The postcode, so we can plan the visit
- Good light, ideally daylight, without flash glare
- A clear, close picture of the problem area
Upload a photo of the damage and a wider shot of the entire item, and tell us you’re in Powmill, and we’ll reply with a fixed price.
About our non-slip bath coating in Powmill
It’s popular with older people, families and holiday lets. The coating is clear and textured, so the bath looks much the same. If you are dealing with worn-out textured areas and a bath or tray that is slippery when wet, we can typically put it right, on wet room floors (ask us), acrylic baths and resurfaced baths alike.
Whatever the size of the job, you get the same one-year guarantee. A soft brush and mild cleaner keep it clean. Avoid scourers on the coating.
- Location
- Powmill (FK14)
- County
- Clackmannanshire
- Cover
- A year, on every repair
- Quote
- Fixed and free, based on pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Work for landlords and builders
Rented homes see more wear and tear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
Letting agents often send us photos straight from the inventory. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
The process
You do not need to empty the room. Everything we use comes in the van with us, lay protective sheets and get going once we’ve agreed what we’re doing. It normally takes a morning or an afternoon, and you can get on with other things while we are there.
- We clean and degrease the standing area.
- We mask out the area to be treated.
- We apply the clear textured coating.
- We remove the masking for a neat edge.
- Once it has cured, normally overnight, it’s ready.
Preparing for the visit
- Have somewhere for us to park nearby if possible
- Clear the area around the damage
- Mention any parking restrictions or tricky access
Ask for a price
A quote takes minutes to ask for: photograph the damage, then the whole bath or shower tray, add your postcode and send them over. What comes back is a fixed price, not a guess.
Advice
Should I try a DIY kit first?
A DIY attempt is not a disaster. We take the old repair out and do it properly, so it does not stop a professional repair. Just mention it when you send photos, as it can add time.
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
Common problems we fix in Powmill
Baths and trays are made smooth so they’re easy to clean, yet with soap and water on them they become slippery. The textured patch on an older bath also wears down over time.
Get in touch if you’ve noticed:
- Bath mats that harbour mould or get forgotten
- Resurfaced baths that are now too smooth
- Safety for older or less mobile people
- A bath or tray that is slippery when wet
Before booking anyone
- What preparation is included
- What happens if they find more damage
- How long it needs to cure
- How the colour is matched
Repair or replace: which is better?
Instead, you could go for replacing the bath or tray with a textured one, or a bath mat that needs lifting and cleaning. A non-slip coating treats your existing bath or tray. The price depends on how much damage there is and what kind, the material and how many jobs we combine into one visit. You get a fixed quote from your pictures, so you know the cost before booking.
What you get with us
- One-year guarantee on every repair
- Free fixed quotes from pictures
- Straight answers about what a repair can do
- Work done at your home or business
Read our prices page.
Places near Powmill
What else we do in Powmill
What we cannot put right
A repair isn’t always the answer, and we will tell you before we start. Repairs will not solve:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
If in doubt, send pictures and we’ll say what we think before you book.
Materials we work on in Powmill
- Shower trays
- Acrylic baths
- Resurfaced baths
- Enamelled baths
- Wet room floors (ask us)
Powmill: your questions answered
Will there be a smell?
It depends on the job, but frequently a little. Ventilation keeps it to a minimum, and it soon fades.
Do I have to be there?
We need someone to let us in. After that, you can carry on with your day.
Will the price change on the day?
If we find something the photos didn’t show, we explain it first. The price only changes if you agree.
How do I clean it?
Yes. Use a soft brush and a mild cleaner.
What do you need from me?
Some pictures, your postcode and how to reach you. On the day, we only need access to the room.
Do you work for landlords and businesses?
Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses in Powmill.
Can I add another job to the visit?
Yes. Doing several items on one visit typically costs less than separate visits. Send pictures of everything you’d like done.
What happens after I send pictures?
We review the pictures and send a fixed quote.
Our work in Powmill
Powmill is about 9 miles east of Alloa, in Clackmannanshire. Our work suits any type of property, old or new, large or small, plus businesses and rented homes. Powmill is one of 16 towns and villages in Clackmannanshire we cover. Our jobs stretch from Powmill to Edinburgh (about 21 miles away).
Postcode districts we cover here: FK14. Local streets include Gartwhinzean Road, Mossend Green and Mill Gardens. Powmill is on the A977, so it’s easy for us to reach. Neighbouring places we cover include Rumbling Bridge (1 mile north), Crook of Devon (1 mile north-east), Pool of Muckhart (2 miles north-west), Blairingone (2 miles west) and Dollar (3 miles west). Within a short drive, we also cover Alloa (9 miles west), Tullibody (10 miles west), Tillicoultry (6 miles west), Kincardine (9 miles south-west), Alva (9 miles west) and Clackmannan (8 miles south-west).
Around Powmill
Nearby you will also find Killernie Castle (3.6 miles south). Not far away are Loch Glow and Innerdownie.
About our accreditations · Every repair comes with a one-year guarantee.
