Dorset · England
Non-Slip Bath Coating in Pymore
Clear non-slip coatings for baths and shower trays for householders, landlords and businesses in Pymore. Send pictures for a free, fixed quote.
- A bath or tray that is slippery when wet
- Resurfaced baths that are now too smooth
- Worn-out textured areas
How we handle non-slip bath coating in Pymore
It’s a clear, textured coating, so it shows only as a slightly matt area where you stand. It’s popular with older people, families and holiday lets. If you are dealing with safety for older or less mobile people and worn-out textured areas, we can help, whatever the material.
Whatever the size of the job, you get the same one-year guarantee in Pymore and across Dorset. Clean with a soft brush and a mild cleaner. Don’t use abrasive pads on the textured area.
- Where
- Pymore (DT6)
- County
- Dorset
- Guarantee
- A year, on every repair
- Quote
- Free and fixed, from your photos
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
What a repair can’t fix
It helps to know what we cannot do:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
Not sure? Send pictures and we’ll give you a straight answer before booking.
Surfaces we repair
- Resurfaced baths
- Acrylic baths
- Wet room floors (ask us)
- Enamelled baths
- Shower trays
Other services in Pymore
What non-slip bath coating costs
Every quote is fixed and free. What we look at:
- How easy the damage is to reach
- How hard the colour is to match
- The material and finish
- Any earlier repairs that need removing first
A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
Quotes from your pictures
Phone photos are fine. Just ensure we can see:
- A clear, close picture of the problem area
- One picture of the whole bath or shower tray
- Good light, ideally daylight, without flash glare
- The material, if you know it
Most clients in Pymore get their price from photos. Add a line about what happened and your postcode, and we will reply with a fixed quote and the earliest dates we have.
Where we work around Pymore
Pymore is about 1 mile north of Bridport, in Dorset. We agree a date that works for you, and we’ll give you an arrival time in advance, so there’s no waiting around. Our repair technicians cover 462 places across Dorset.
Here we cover the DT6 postcode area. We regularly work on streets such as Suttil Crescent, Pond End and Morbae Grove and the roads around them. We also travel to Bradpole (1 mile east), Dottery (1 mile north-west), Allington (1 mile south-west), Bridport (1 mile south) and New Zealand (1 mile south). Within a short drive, we also cover Dorchester (14 miles east), Fordington (14 miles east), Lyme Regis (8 miles west), Chickerell (14 miles south-east), Beaminster (4 miles north) and Broadwey (14 miles south-east).
Around Pymore
We visit homes around Parish Church of Holy Trinity, St Catherine's Roman Catholic School and Pymore Inn, among other places. Well-known places in the area include Burcomb Wood (3.7 miles north-east) and Bridport Community Hospital (0.9 miles south-west). Not far away are Thorncombe Beacon.
Should I try a DIY kit first?
DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
If you’re set on a kit, follow its instructions closely, make sure the area is clean and completely dry, and don’t use it until it has fully cured. If it fails, we can still put it right.
Repair or replace: which is better?
Instead, you could go for a new textured bath or tray, or a bath mat that needs lifting and cleaning. A non-slip coating treats your existing bath or tray. A repair typically costs much less than people expect, especially compared with replacing and refitting. Send pictures and we’ll give you the exact figure.
Why book with us
- A year’s guarantee on all work
- Most jobs done in one visit
- Everything repaired in place
- CHAS, Constructionline and SafeContractor accredited
See our full price list.
What we’re called out for in Pymore
Baths and trays are made smooth so they’re easy to clean, yet wet, soapy surfaces are slippery. Textured areas on older baths wear smooth too.
Clients normally contact us about:
- Resurfaced baths that are now too smooth
- A bath or tray that is slippery when wet
- Safety for older or less mobile people
- Bath mats that harbour mould or get forgotten
What to look for in a quote
- Who turns up on the day
- What the guarantee covers, and for how long
- How the room is protected while they work
- What aftercare is recommended
FAQs for Pymore
I rent my home. Can I book you?
Yes, though it’s best to check with your landlord first. Landlords are frequently glad to have it sorted.
Is repairing better than replacing?
In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it isn’t worth repairing, we will tell you.
Can you repair something that is been repaired before?
Generally, yes. Tell us what was done before.
Do you come to Pymore?
Yes, we do. We send a technician to Pymore for every job, with no extra charge for travel.
How do I clean it?
Yes. Use a soft brush and a mild cleaner.
Will you leave a mess?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
How quickly can you book me in?
Your quote comes with available dates. Tell us if you need it done quickly.
Is there a guarantee?
Every repair comes with our one-year guarantee. Ask us what it covers when you get your quote.
Landlord and trade work in Pymore
Hotels, guest houses and holiday lets can’t afford rooms out of action for long, so most of our work is done in a single visit. We will fit around changeovers where we can.
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
The process
From the moment we arrive, the aim is to do the job without disturbing the rest of your home. We mask off everything nearby, the job takes a few hours, and we finish with a tidy-up and a look at the finished work together.
- We clean and degrease the standing area.
- Next we mask off the area.
- We apply the clear textured coating.
- We lift the masking for a clean edge.
- Once it has cured, normally overnight, it’s ready.
Preparing for the visit
- Tell us about parking, stairs or access
- Clear the area around the damage
- Let the surface dry out before the visit
Getting a price
Send us pictures of the damage and one of the whole item, with your DT6 postcode, and we will reply with a fixed price.
Advice
About our accreditations · Every repair comes with a one-year guarantee.
