Cambridgeshire · England

Non-slip bath & shower coating in Reach, Cambridgeshire

Non-slip bath coating in Reach without the cost of replacing. Send us photos for a fixed quote, then we come to you.

  • Bath mats that harbour mould or get forgotten
  • Safety for older or less mobile people
  • Worn-out textured areas
Surface Doctor technician refinishing the outside of a roll-top bath

Need non-slip bath coating in Reach?

How we handle non-slip bath coating in Reach

It suits older people, families and holiday lets. The coating is clear and textured, so the bath looks much the same. If you’re dealing with resurfaced baths that are now too smooth and worn-out textured areas, we can typically put it right, whatever the material.

You’re covered after we leave: each job carries a one-year guarantee, and we will explain exactly what it covers when we quote. A soft brush and mild cleaner keep it clean. Don’t use abrasive pads on the textured area.

Location
Reach (CB25)
Region
Cambridgeshire
Guarantee
12 months on all our work
Price
Free and fixed, from your photos
Phone
0345 017 0787
Page updated
23 October 2026
Discoloured square shower tray restored with a new white finish

How it works

It’s a tidy, low-fuss visit. We confirm the time with you beforehand, cover and mask the work area, and get on with the job, which typically takes a morning or an afternoon. If anything looks different from your pictures, we will talk to you before going ahead.

  1. We start by degreasing the area where you stand.
  2. Next we mask off the area.
  3. We put on the clear non-slip coating.
  4. We remove the masking for a neat edge.
  5. We leave it to cure, generally overnight.

Preparing for the visit

  • Point us to the nearest place to park
  • Let us know if it has been repaired before
  • Tell us about parking, stairs or access

Get a quote

There is no need for us to visit first. Nearly every job can be priced from pictures: we need a close-up, a wider picture and your postcode, and we’ll come back to you with a fixed figure.

Get a fixed price

Read more

DIY kit or professional repair?

If you’ve already tried a DIY fix, that’s fine. We take the old repair out and do it properly, so it doesn’t stop a professional repair. Just mention it when you send photos, as it can add time.

We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.

Should you replace it?

Instead, you could go for a new textured bath or tray, or relying on a mat, which traps water and needs cleaning. A non-slip coating adds grip to the bath you have. We don’t add extras on the day. What we quote from your photos is what you pay, and if the damage turns out to be different, we discuss it before starting.

Why us?

  • Usually one visit, start to finish
  • CHAS and Constructionline accredited
  • Fixed prices from your photos
  • Everything repaired in place

Take a look at our prices page.

Common problems we fix in Reach

Baths and trays are made smooth so they’re easy to clean, but wet, soapy surfaces are slippery. Textured areas on older baths wear smooth too.

Look out for these signs:

  • A bath or tray that is slippery when wet
  • Safety for older or less mobile people
  • Worn-out textured areas
  • Bath mats that harbour mould or get forgotten

What your quote should include

  • What aftercare is recommended
  • If travel is included in the price
  • What happens if they find more damage
  • How long the guarantee is and what it covers

Choosing a repair company

What a repair cannot fix

Not everything can be repaired, and we’ll tell you before we start. Repairs will not solve:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

Not sure? Send pictures and we will give you a straight answer.

Surfaces we repair

  • Enamelled baths
  • Shower trays
  • Resurfaced baths
  • Wet room floors (ask us)
  • Acrylic baths

About Reach

Reach is about 5 miles west of Newmarket, in Cambridgeshire. We travel to homes and businesses in Reach and nearby villages, so you do not need to take anything anywhere. Reach is one of 371 places in Cambridgeshire where we work. We work right across the region, from Reach to London (about 56 miles away).

We work across the CB25 postcode area and the streets around it. Whether you live on Fair Green, Chapel Lane and The Hythe or anywhere nearby, a technician can come to you. We also cover the places around Reach: Commercial End (2 miles south), Swaffham Bulbeck (2 miles south), Lode (3 miles south-west), Bottisham (4 miles south-west) and Stow cum Quy (5 miles south-west). Larger places within reach include Cambridge (8 miles south-west), Newmarket (5 miles east), Ely (9 miles north), Littleport (13 miles north), King's Hedges (7 miles south-west) and Soham (5 miles north).

Around Reach

Locally, our jobs take us to homes close to Church of St Etheldreda and The Holy Trinity, among other places. Reach’s nearest station is Waterbeach station, roughly 4.2 miles west of the centre. Further afield, we also cover the area around Newmarket Equine Hospital (4.3 miles south-east) and Bottisham Airfield Museum (4 miles south). The countryside around Reach includes Wicken Fen.

Map of Reach © OpenStreetMap contributors

Your questions about non-slip bath coating in Reach

Will I see the coating?

Only slightly: it shows as a matt area where you stand.

Is it OK to have pets in the house?

Yes, as long as they stay out of the room we’re working in. We will let you know when it’s safe to use again.

Is there any odour?

There may be a mild smell during the work.

How soon can you come?

Your quote comes with available dates. Tell us if you need it done quickly.

Do you charge for travel?

We don’t add a call-out fee. The fixed quote covers the visit and the work.

What areas do you cover?

Everywhere in the UK, Reach included. Travel is included in the price.

How do I get a price for non-slip bath coating in Reach?

We give a fixed quote from your photos. Send a close-up of the damage and a wider photo with your CB25 postcode.

Can you repair something that’s been repaired before?

In most cases. The old repair comes out first, so let us know about it.

What affects the price in Reach

There is no area surcharge for Reach. The price reflects:

  • Any earlier repairs that need removing first
  • Unusual colours or finishes
  • What kind of damage it is
  • Whether we combine several jobs

No two jobs are quite the same, so each one is priced on its own. The size and type of damage, the material and access all play a part, and combining jobs on one visit brings the cost down.

How to get a fixed price

When you take your photos, these tips help us give you a firm price:

  • A coin beside the damage so we can judge size
  • A close-up of the damage, in focus
  • One picture of the entire bath or shower tray
  • Any earlier repairs or coatings

The quickest way to a price is to send a couple of pictures through our quote form or ring us. We’ll tell you honestly whether it can be repaired.

Work for landlords and builders

If you manage property in Reach, we can repair and quote for several addresses together. Just send pictures for each address and we will come back with a combined price.

We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We are CHAS, Constructionline and SafeContractor accredited.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.