Vale of Glamorgan · Wales
Non-Slip Bath Coating for Rhoose homes
Non-slip bath coating across Rhoose and nearby, done in a single visit in most cases and guaranteed for a year.
- Safety for older or less mobile people
- Resurfaced baths that are now too smooth
- A bath or tray that is slippery when wet
How we handle non-slip bath coating in Rhoose
The coating is clear and textured, so it shows only as a slightly matt area where you stand. It suits older people, families and holiday lets. Whether it’s a bath or tray that is slippery when wet and resurfaced baths that are now too smooth, we can normally put it right, on acrylic baths, shower trays and resurfaced baths alike.
You are covered after we leave: our one-year guarantee applies to every job, and we will explain exactly what it covers when we quote. Clean with a soft brush and a mild cleaner. Do not use abrasive pads on the textured area.
- Where
- Rhoose (CF62)
- Area hub
- Vale of Glamorgan
- Guarantee
- One year on every repair
- Quote
- Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Landlords, agents and businesses in Rhoose
Rented homes see more wear and tear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
We are used to working with agents and managing companies. Send the address, pictures and access details and we’ll arrange it.
Can I fix it myself?
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and don’t use it until it has fully cured. If it does not work out, we can still repair it properly.
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
Why repair rather than replace?
The alternatives are a new textured bath or tray, or relying on a mat that needs lifting and cleaning. A non-slip coating treats your existing bath or tray. No two jobs are quite the same, so each one is priced on its own. The size and type of damage, the material and access all play a part, and combining jobs on one visit brings the cost down.
What you get with us
- Honest advice, even when it means no job
- Repair technicians who travel to you, UK-wide
- A fixed quote before you book
- Most jobs done in one visit
Take a look at our full price list.
Rhoose questions
Do you work in Rhoose?
Yes. We work across the UK and come to Rhoose. Send pictures and we’ll quote, or call 0345 017 0787.
Will I see the coating?
Very little: it shows as a matt area where you stand.
What happens if you find more damage?
If we find something the pictures didn’t show, we explain it first. You decide whether to go ahead.
What does non-slip bath coating cost?
The exact price depends on the damage, so we quote from pictures. You know the full cost before anything is booked.
Will there be a smell?
There can be some smell while we work, so we ventilate the room. It fades as everything cures.
Are you a vetted contractor?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
How quickly can you book me in?
We will give you dates with your quote. If it’s urgent, say so and we’ll do what we can.
Can I get a quote without a visit?
Yes, almost always. Clear photos let us give you a fixed quote without visiting.
Where we work around Rhoose
Rhoose (Welsh: Y Rhws) is about 4 miles south-west of Barry, in the Vale of Glamorgan. Whether you’re in the middle of Rhoose or on the outskirts, the service is the same: fixed prices, tidy work and a one-year guarantee. We cover all 67 towns and villages in the Vale of Glamorgan, from the larger towns to small villages.
Our visits in CF62 work the same way as everywhere else we cover. From Station Road, St Peters Crescent and Railway Road or anywhere nearby, a technician can come to you. We also cover the places around Rhoose: Nurston (1 mile north-west), Font-y-gary (1 mile west), Pen-marc (2 miles north), East Aberthaw (2 miles west) and Llancarfan (2 miles north-west). Further out, we also cover Barry (4 miles north-east), Penarth (8 miles north-east), Gibbonsdown (4 miles north-east), Cadoxton (4 miles north-east), Dinas Powys (6 miles north-east) and Llantwit Major (6 miles west).
What’s near Rhoose
Around Rhoose, we work in homes near Church Of St Curig, The Mayflower pub and Rhws Primary School and the streets around them. There’s a railway station in Rhoose itself: Rhoose Cardiff Airport station. Further afield, we also cover the area around Barry Hospital (2.9 miles north-east) and Porthkerry Castle (1.1 miles east). For a walk, there’s Ash Tip and T. G. Tibbetts.
What we cannot put right
We will always be straight with you, so here’s what a repair won’t do:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
If in doubt, send photos and we will say what we think before booking.
What we work on
- Enamelled baths
- Acrylic baths
- Wet room floors (ask us)
- Shower trays
- Resurfaced baths
Nearby places to Rhoose
Also in Rhoose
What non-slip bath coating costs
Every quote is fixed and free. What we take into account:
- The colour and finish to match
- Whether we combine several jobs
- What the surface is made of
- Whether old repairs or coatings need taking off
Our prices are the same across the UK, so there is no premium for Rhoose. What changes the price is the job itself: how much damage, what it’s made of and how many items.
Send pictures for a quote
We price nearly every job from pictures. This is what to send:
- Something in shot to show the size
- What it’s made of, if you know
- Details of any past repairs
- A clear, close picture of the problem area
Most customers in Rhoose get their price from pictures. Add a line about what happened and your postcode, and we will reply with a fixed quote and the earliest dates we have.
When to call us in Rhoose
Smooth surfaces are easy to clean, yet wet, soapy surfaces are slippery. Textured areas on older baths wear smooth too.
These are the problems we’re asked about most:
- A bath or tray that is slippery when wet
- Bath mats that harbour mould or get forgotten
- Resurfaced baths that are now too smooth
- Safety for older or less mobile people
What to look for in a quote
- The length of the guarantee and what it covers
- Whether the colour is mixed to match
- Whether the price covers travel
- What preparation is included
What we do, step by step
On the day itself, there is little for you to do. Show us the job, point us to the room, and we’ll take it from there. The job generally runs to a few hours, tidy-up included.
- We clean and degrease the standing area.
- We mask out the area to be treated.
- We apply the clear textured coating.
- The masking comes off to leave a neat edge.
- Once it has cured, normally overnight, it’s ready.
Preparing for the visit
- Let us know which floor the room is on
- Have a window or extractor fan available
- Keep a parking space free if you can
Ask for a price
The quickest way to a price is to send a couple of photos using our quote form or ring us. We’ll say straight away whether it can be repaired.
Read more
About our accreditations · Every repair comes with a one-year guarantee.
