Northumberland · England
Non-Slip Bath Coating for Riding Mill homes
Clear non-slip coatings for baths and shower trays for householders, landlords and businesses in Riding Mill. Send photos for a free, fixed quote.
- Worn-out textured areas
- Bath mats that harbour mould or get forgotten
- A bath or tray that is slippery when wet
How we handle non-slip bath coating in Riding Mill
It’s a clear, textured coating, so it shows only as a slightly matt area where you stand. It suits homes with older or less mobile people, holiday lets and families. Whether it’s worn-out textured areas and a bath or tray that is slippery when wet, we can typically put it right, on resurfaced baths, acrylic baths and enamelled baths alike.
All of our repairs are guaranteed for twelve months in Riding Mill and everywhere else. If something goes wrong with the work, we come back. A soft brush and mild cleaner keep it clean. Do not use abrasive pads on the textured area.
- Area
- Riding Mill (NE44)
- Region
- Northumberland
- Warranty
- A year, on every repair
- Price
- Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
What a repair cannot fix
Some jobs are not right for a repair, including:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
Not sure? Send photos and we will give you a straight answer before you book.
Surfaces we repair
- Enamelled baths
- Resurfaced baths
- Acrylic baths
- Wet room floors (ask us)
- Shower trays
Places near Riding Mill
More services for Riding Mill
Repairing versus replacing in Riding Mill
Instead, you could go for replacing the bath or tray with a textured one, or a bath mat, which traps water and needs cleaning. A non-slip coating treats your existing bath or tray. The price reflects the work involved, not your postcode. You’ll see the full price before booking, with no extras added later.
Why us?
- We will tell you if it’s not worth repairing
- Fixed prices from your pictures
- Dust sheets down, tidy finish
- CHAS and Constructionline accredited
See our full price list.
For landlords and businesses
We work for landlords, letting agents and housing providers in Riding Mill as well as homeowners. Repairing between tenancies keeps void periods short, and it usually costs far less than a refit.
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting so nothing needs replacing. We are CHAS, Constructionline and SafeContractor accredited.
How the visit works
Expect a friendly, tidy visit. We agree the arrival time in advance, protect the area, and get on with the job, which normally takes a few hours. If anything looks different from your photos, we’ll talk to you before going ahead.
- First the standing area is cleaned and degreased.
- The area to be treated is masked out.
- We put on the clear non-slip coating.
- The masking comes off to leave a neat edge.
- We leave it to cure, generally overnight.
Getting ready for the visit
- Keep pets and children out of the room while we work
- Clear toiletries, mats and anything else from around the area
- Keep a parking space free if you can
How to get a price
The quickest way to a price is to send two or three photos using our quote form or ring us. We’ll tell you honestly whether it can be repaired.
Read more
FAQs for Riding Mill
How do I clean it?
Yes. A soft brush and mild cleaner is all it needs.
Is the work guaranteed?
Every repair comes with a one-year guarantee. Ask us what it covers when you get your quote.
Can you do more than one item on the same visit?
Yes. Combining jobs on one visit brings the cost down. Send pictures of everything you’d like done.
Is repairing better than replacing?
Generally, when the rest is in good condition. A repair avoids removal and making good. We will tell you honestly if replacement makes more sense.
What information do you need?
Send pictures through the quote form or call 0345 017 0787, and we’ll do the rest.
What does non-slip bath coating cost?
The exact price depends on the damage, so we quote from photos. You know the full cost before anything is booked.
Will you leave a mess?
No. The work area is masked and covered, and we take our waste away with us.
Are there extra charges for Riding Mill?
We don’t add a call-out fee. Your fixed quote includes everything.
Prices and what affects them
There’s no charge for travel to Riding Mill. The price depends on:
- The colour and finish to match
- The type of damage
- How easy the damage is to reach
- Previous DIY repairs that have to come out
Every job is a little different, so we price each one individually. What’s damaged, how badly and how easy it is to reach all make a difference, and combining jobs on one visit brings the cost down.
How to get a fixed price
We price nearly every job from pictures. This is what we need:
- What it’s made of, if you know
- A close-up of the damage, in focus
- Something in shot to show the size
- A picture taken from further back
Most customers in Riding Mill get their price from photos. Tell us what happened and where you are, and we’ll reply with a fixed quote and the earliest dates we have.
DIY kit or professional repair?
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.
If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it does not stop a professional repair. It does add a little time, so tell us about it when you send photos.
Covering Riding Mill
Riding Mill is about 8 miles north-west of Consett, in Northumberland. We visit homes and businesses in Riding Mill and nearby villages, so there is no workshop to go to. Riding Mill is one of 189 towns and villages in Northumberland where we work. Our jobs stretch from Riding Mill to Newcastle upon Tyne (14 miles away).
Our visits in NE44 are booked in the same way as anywhere else. From Millfield Road, Church Lane and Riding Close or anywhere nearby, a technician can come to you. Close by, we cover Corbridge (3 miles north-west), Stocksfield (3 miles east), New Ridley (3 miles south-east), Branch End (3 miles east) and West Mickley (3 miles east). We also work in nearby towns such as Hexham (5 miles west), Prudhoe (5 miles east), Ponteland (11 miles north-east), Haydon Bridge (11 miles west) and Wylam (7 miles east).
Around Riding Mill
Locally, our jobs take us to homes close to Broomhaugh Church of England First School, Wellington Inn and Church of St James and the streets around them. There is a railway station in Riding Mill itself: Riding Mill station. Nearby you will also find Hunday Museum (1.5 miles north-east) and Hexham General Hospital (5 miles west).
When to call us in Riding Mill
Smooth surfaces are easy to clean, but with soap and water on them they become slippery. Textured areas on older baths wear smooth too.
The things clients typically mention when they call include:
- Bath mats that harbour mould or get forgotten
- A bath or tray that is slippery when wet
- Resurfaced baths that are now too smooth
- Safety for older or less mobile people
What your quote should include
- Who turns up on the day
- What protection goes down before work starts
- Whether the price is fixed and includes VAT
- What the guarantee covers, and for how long
About our accreditations · Every repair comes with a one-year guarantee.
