Lincolnshire · England
Non-Slip Bath Coating in Risegate
Clear non-slip coatings for baths and shower trays at your home in Risegate, with a one-year guarantee on every repair.
- Bath mats that harbour mould or get forgotten
- Resurfaced baths that are now too smooth
- Safety for older or less mobile people
What affects the price in Risegate
There are no hourly rates or hidden extras. The price depends on:
- Whether it’s a chip, crack, burn or wear
- The colour and finish to match
- Any earlier repairs that need removing first
- How many items we do on one visit
Set against the cost of replacement, a repair is normally a fraction of the price, because there is no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
How to get a fixed quote
You can generally get a fixed price without us visiting. To make it quick:
- Any earlier repairs or coatings
- One picture of the whole bath or shower tray
- Where you are, by postcode
- A coin beside the damage so we can judge size
A quote takes minutes to ask for: take one close-up and one wider shot of the bath or shower tray, include your postcode and send them to us. You will get a fixed quote, not an estimate.
About our non-slip bath coating in Risegate
It’s a clear, textured coating, so it shows only as a slightly matt area where you stand. It’s popular with homes with older or less mobile people, holiday lets and families. Our technicians work on acrylic baths, shower trays and wet room floors (ask us), and common reasons people contact us are resurfaced baths that are now too smooth and worn-out textured areas.
The work is covered for a year after we finish. If anything isn’t right, ring us and we will come back. A soft brush and mild cleaner keep it clean. Don’t use abrasive pads on the textured area.
- Location
- Risegate (PE11)
- County
- Lincolnshire
- Guarantee
- One year on every repair
- Quotes
- Fixed and free, based on photos
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Should I try a DIY kit first?
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and give it the full curing time. If it doesn’t work out, we can still repair it properly.
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is typically the cheaper route.
Do you need non-slip bath coating in Risegate?
Smooth surfaces are easy to clean, yet with soap and water on them they become slippery. The textured patch on an older bath also wears down over time.
The things customers usually mention when they call include:
- Bath mats that harbour mould or get forgotten
- A bath or tray that is slippery when wet
- Worn-out textured areas
- Safety for older or less mobile people
What your quote should include
- How the room is protected while they work
- Whether they match the colour on site
- How to look after the finish
- How changes to the job are handled
Work for landlords and builders
If you manage property in Risegate, we can repair and quote for several addresses together. Send pictures for each one and we will price them together.
We work for landlords, letting agents and housing providers in Risegate as well as homeowners. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
Towns and villages near Risegate
Other services in Risegate
How it works
On the day, we arrive at the time we have agreed, cover the area with dust sheets and masking, and set to work. Expect it to take a few hours. We tidy up before we leave and tell you when it’s ready to use.
- We clean and degrease the standing area.
- Next we mask off the area.
- We put on the clear non-slip coating.
- We remove the masking for a neat edge.
- The coating is left to cure before use, usually overnight.
How to prepare
- Ensure the room can be ventilated
- Clear toiletries, mats and anything else from around the area
- Keep children and pets away from the room on the day
Getting a price
For most jobs, photos are all we need to give you a price. Tell us what happened and where you are, and we will send back a fixed quote and some dates.
Read more
Should you replace it?
Instead, you could go for replacing the bath or tray with a textured one, or a bath mat, which traps water and needs cleaning. A coating adds grip to the bath you have. There are no surprise extras on the day. The price we quote from your pictures is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
What you get with us
- CHAS and Constructionline accredited
- We will tell you if it’s not worth repairing
- Technicians who travel to you, UK-wide
- No need to remove anything
Take a look at our pricing.
Honest limits
It helps to know what we cannot do too:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
If in doubt, send photos and we’ll say what we think.
Materials we work on in Risegate
- Enamelled baths
- Wet room floors (ask us)
- Resurfaced baths
- Shower trays
- Acrylic baths
Risegate questions
Are there extra charges for Risegate?
We do not add a call-out fee. Your fixed price includes everything.
Which areas do you work in?
Across the UK, and that includes Risegate. Prices don’t change with location.
Will I see the coating?
Very little: the treated area looks slightly matt.
Is there a guarantee?
All our work carries a one-year guarantee. Ask us what it covers when you get your quote.
Are you accredited?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
How quickly can you book me in?
That depends on our diary for your area. We will offer you dates when we send your quote.
Can I add another job to the visit?
Yes. Combining jobs on one visit brings the cost down. Send photos of everything you’d like done.
Do you do work for letting agents?
Yes, often. We quote for multiple addresses and fit around tenancy changeovers.
About Risegate
Risegate is about 5 miles north of Spalding, in Lincolnshire. We work in every kind of home, old or new, large or small, as well as offices, shops and holiday lets. Risegate is one of 732 towns and villages in Lincolnshire we cover. Our jobs stretch from Risegate to Birmingham (about 76 miles away).
Our visits in PE11 are booked in the same way as anywhere else. Whether you live on Shepperson's Avenue, Siltside and Chesboule Lane or anywhere nearby, a technician can come to you. We also cover the places around Risegate: Gosberton Clough (1 mile west), Quadring Fen (2 miles north-west), North Gate (2 miles south), Donington South Ing (3 miles north) and Pinchbeck West (3 miles south). Within a short drive, we also cover Boston (11 miles north-east), Spalding (5 miles south), Sleaford (13 miles north-west), Bourne (9 miles south-west), Holbeach (10 miles east) and Austerby (9 miles south-west).
Landmarks near Risegate
Our customers here include homes close to Church of St Gilbert and St Hugh, The Five Bells pub and Clough and Risegate Community Primary School and the streets around them. For rail, the closest station is Spalding station, roughly 4.9 miles south-east. Nearby you’ll also find The Spalding Bulb Museum (3 miles south-east).
About our accreditations · Every repair comes with a one-year guarantee.
