Oxfordshire · England

Non-slip bath & shower coating in Risinghurst, Oxfordshire

Clear non-slip coatings for baths and shower trays in Risinghurst, carried out at your home and guaranteed for a year.

  • Bath mats that harbour mould or get forgotten
  • Resurfaced baths that are now too smooth
  • Safety for older or less mobile people
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted non-slip bath coating in Risinghurst

What happens on the day

Visits start with a quick look at the job together. After that, protection goes down around the work area and the work begins. You can expect it to take a morning or an afternoon, and we’ll tell you if anything changes.

  1. First the standing area is cleaned and degreased.
  2. The area to be treated is masked out.
  3. The clear textured coating is applied.
  4. We lift the masking for a clean edge.
  5. We leave it to cure, normally overnight.

Getting ready for the visit

  • Move bottles, mats and clutter away from the area
  • Point us to the nearest place to park
  • Keep pets and children out of the room while we work

Getting a price

Getting a price is easy: snap the damage close up and then the entire item, send them over with your postcode, and we’ll reply with a fixed price. There’s no charge for the quote and you are under no obligation.

Send photos for a quote

Related advice

Non-slip bath coating in Risinghurst without replacing anything

It’s a clear, textured coating, so the bath looks much the same. It suits homes with older or less mobile people, holiday lets and families. If you’re dealing with bath mats that harbour mould or get forgotten and worn-out textured areas, we can help, whatever the material.

All our work is covered by a one-year guarantee. A soft brush and mild cleaner keep it clean. Do not use abrasive pads on the textured area.

Discoloured square shower tray restored with a new white finish
Where
Risinghurst (OX3)
County
Oxfordshire
Cover
A year, on every repair
Quote
Free, fixed quote from pictures
Telephone
0345 017 0787
Updated
23 October 2026

When we’d advise against a repair

We would rather lose a job than do one that won’t last, so these are the limits:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

If in doubt, send pictures and we’ll say what we think.

Surfaces we repair

  • Resurfaced baths
  • Enamelled baths
  • Shower trays
  • Wet room floors (ask us)
  • Acrylic baths

Repair or replace: which is better?

The alternatives are a new textured bath or tray, or a bath mat, which traps water and needs cleaning. A coating treats your existing bath or tray. A repair is priced on what needs doing, not where you live. The full price is agreed before you book, with no extras added later.

What you get with us

  • No need to remove anything
  • A year’s guarantee on all work
  • Most jobs done in one visit
  • Same prices wherever you are

Take a look at our prices page.

Prices and what affects them

We don’t charge extra for travel to Risinghurst. The price depends on:

  • Where the damage is and how we get to it
  • What the surface is made of
  • Previous DIY repairs that have to come out
  • Doing more than one item at once

A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.

Send photos for a quote

Before you send photos, a few simple things make all the difference:

  • What it’s made of, if you know
  • A clear, close picture of the problem area
  • One picture of the entire bath or shower tray
  • Something in shot to show the size

For a price in Risinghurst, pictures are the quickest way: a close-up, a wider shot and your postcode. You will get a fixed quote with dates to choose from.

Landlords, agents and businesses in Risinghurst

Housing associations and facilities teams use us for planned and reactive repairs. A repair avoids taking out and refitting, which is easier on the people living there.

Builders use us to fix snagging damage before handover, saving last-minute replacements. Several plots can be done in one visit.

Risinghurst and the surrounding area

Risinghurst is about 2 miles east of Oxford, in Oxfordshire. We travel to homes and businesses in Risinghurst, so nothing has to leave your home. Risinghurst is one of 443 towns and villages in Oxfordshire we cover. You can also see our page for London, about 50 miles away.

Here we cover the OX3 postcode area. From Mark Road, Kiln Lane and Pitts Road or a nearby road, we can come to you. Neighbouring places we cover include Shotover Hill (1 mile south), Barton (1 mile north-west), Forest Hill (2 miles east), Horspath (2 miles south-east) and Stanton St John (2 miles north-east). Larger places within reach include Didcot (11 miles south), Bicester (10 miles north), Abingdon-on-Thames (7 miles south-west), Witney (13 miles west), Thame (9 miles east) and Wantage (15 miles south-west).

Landmarks near Risinghurst

Locally, our jobs take us to homes close to Holy Trinity Church, Bayards Hill School and Stansfeld Park. You will also find Parish Church of St Mary (under half a mile north-west), The Six Bells pub (under half a mile west), Cheney School (1.5 miles west) and Headington Quarry Foundation Stage School (within half a mile west). The nearest railway station is Oxford station, about 3.5 miles west. A little further out are Templars Square (2.2 miles south-west) and Nuffield Orthopaedic Centre (0.9 miles south-west). Green spaces nearby include Shotover and CS Lewis Nature Reserve.

Map of Risinghurst © OpenStreetMap contributors

Should I try a DIY kit first?

For a hairline mark somewhere you will never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.

We understand the appeal of fixing it yourself. The trouble is that kit repairs often look fine at first and then fail, and the old filler has to come out before a proper repair.

FAQs for Risinghurst

Is there a call-out fee?

No. Our quotes include travel, and we charge the same wherever you are.

Does someone need to be in?

Yes. We need access to the room while we work, at a time we agree with you.

Can tenants book a repair?

We are happy to deal with the tenant, landlord or agent. Get your landlord’s agreement first.

Is the work guaranteed?

All our work carries our one-year guarantee. We will explain what it covers when we quote.

Will you leave a mess?

No. The work area is masked and covered, and we leave the room clean.

Will a non-slip coating change how my bath looks?

Only slightly: it shows as a matt area where you stand.

Do you hold any accreditations?

Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.

Can landlords book you?

Yes. We work for landlords, agents, builders and businesses as well as householders across Oxfordshire.

Do you need non-slip bath coating in Risinghurst?

Smooth surfaces are easy to clean, yet with soap and water on them they become slippery. Textured areas on older baths wear smooth too.

It’s worth getting a quote if you see:

  • Worn-out textured areas
  • Safety for older or less mobile people
  • Resurfaced baths that are now too smooth
  • Bath mats that harbour mould or get forgotten

What to look for in a quote

  • A fixed quote, and whether VAT is included
  • Whether the colour is mixed to match
  • How the room is protected while they work
  • How soon you can use it again

10 questions to ask before you book

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.