West Sussex · England

Non-slip bath & shower coating in Runcton, West Sussex

Fixed-price non-slip bath coating in Runcton and the surrounding area, usually in one visit.

  • Resurfaced baths that are now too smooth
  • A bath or tray that is slippery when wet
  • Worn-out textured areas
Surface Doctor technician refinishing the outside of a roll-top bath

Need non-slip bath coating in Runcton?

About our non-slip bath coating in Runcton

It suits homes with older or less mobile people, holiday lets and families. It’s a clear, textured coating, so the bath looks much the same. We’re frequently asked to fix safety for older or less mobile people and resurfaced baths that are now too smooth, in wet room floors (ask us), enamelled baths and acrylic baths.

Whatever the size of the job, it’s backed by a one-year guarantee in Runcton and across West Sussex. A soft brush and mild cleaner keep it clean. Avoid scourers on the coating.

Location
Runcton (PO20)
County
West Sussex
Guarantee
A year, on every repair
Quotes
Free, fixed quote from pictures
Telephone
0345 017 0787
Page updated
23 October 2026
Stained shower tray resurfaced to clean white, before and after

Common questions in Runcton

Will I see the coating?

Very little: the treated area looks slightly matt.

Is my repair covered?

Every repair comes with a one-year guarantee. Ask us what it covers when you get your quote.

Can you redo someone else’s repair?

Generally, yes. Let us know what was used before and we’ll plan for it.

Is there any odour?

Some materials have a smell while they’re applied, which is why we ventilate. It fades as everything cures.

Can pets and children be at home?

Keep pets and children away from the work area on the day.

Can you price it without visiting?

Yes, almost always. A close-up and a wider photo are enough to give a fixed price.

How much does non-slip bath coating cost in Runcton?

Because every job differs, we price from photos. You know the full cost before anything is booked.

Can landlords book you?

Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses.

What happens on the day

The work is clean and fairly quiet, so you can carry on at home. Protection goes down first, then the job itself takes a morning or an afternoon. At the end we talk you through the curing time and the aftercare.

  1. We start by degreasing the area where you stand.
  2. Next we mask off the area.
  3. We put on the clear non-slip coating.
  4. We lift the masking for a clean edge.
  5. The coating is left to cure before use, normally overnight.

Before we arrive

  • Let us know which floor the room is on
  • Have somewhere for us to park nearby if possible
  • Plan for the room to be out of bounds to pets and children

Get a quote

To get a price, send a couple of pictures through our quote form or call us. We will tell you honestly if a repair is the right fix.

Get a fixed quote

Related advice

Can I fix it myself?

You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.

The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.

Common problems we fix in Runcton

Baths and trays are made smooth so they’re easy to clean, yet wet, soapy surfaces are slippery. Textured areas on older baths wear smooth too.

Typical reasons for a call-out include:

  • A bath or tray that is slippery when wet
  • Safety for older or less mobile people
  • Resurfaced baths that are now too smooth
  • Worn-out textured areas

What your quote should include

  • How soon you can use it again
  • Whether there are any call-out or travel charges
  • Whether they match the colour on site
  • What the guarantee covers, and for how long

Our hiring checklist

Repair or replace in Runcton?

Instead, you could go for a new textured bath or tray, or relying on a mat, which traps water and needs cleaning. A non-slip coating adds grip to the bath you have. A repair normally costs much less than people expect, especially compared with replacing and refitting. Send pictures and we’ll give you the exact figure.

Why book with us

  • We’ll tell you if it’s not worth repairing
  • One visit for most repairs
  • CHAS, Constructionline and SafeContractor accredited
  • Dust sheets down, tidy finish

Take a look at our prices page.

What a repair can’t fix

It helps to know what we cannot do too:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

If in doubt, send photos and we will say what we think before you book.

Materials we work on in Runcton

  • Resurfaced baths
  • Shower trays
  • Acrylic baths
  • Enamelled baths
  • Wet room floors (ask us)

Prices and what affects them

Each job gets its own fixed quote. This is what makes a difference:

  • The colour and finish to match
  • How many areas need work
  • Whether we combine several jobs
  • Previous DIY repairs that have to come out

Instead of hourly rates, we price the entire job up front. It depends on the damage, the material and access, and doing several items at once reduces it.

Send pictures for a quote

Almost every job we do is priced from pictures. This is what to send:

  • A wider photo showing the whole bath or shower tray
  • Natural light rather than flash
  • Any earlier repairs or coatings
  • A coin or ruler next to the damage for scale

Pricing is simple: snap the damage close up and then the whole item, send them to us with your postcode, and you’ll get a fixed price back. Quotes are free and no obligation.

Work for landlords and builders

For developers and builders, we fix damage before handover, saving last-minute replacements. Several plots can be done in one visit to keep costs down.

Letting agents often send us pictures straight from the inventory. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.

Runcton and nearby

Runcton is about 2 miles south-east of Chichester, in West Sussex. Book a date that suits you, and you’ll know when to expect us, so you’re not left waiting in all day. Runcton is one of 371 places in West Sussex where we work. Our jobs stretch from Runcton to London (55 miles away).

Our repair technicians cover all of the PO20 postcode area and the streets around it. From Goodwood Gardens, Brookside and Lagness Road or a nearby road, we can come to you. Close by, we cover North Mundham (1 mile west), Merston (1 mile north-east), Lagness (1 mile south-east), Hunston (1 mile west) and Portfield (2 miles north). Further out, we also cover Worthing (15 miles east), Bognor Regis (3 miles south-east), Selsey (6 miles south), Littlehampton (9 miles east), Emsworth (9 miles west) and Rustington (10 miles east).

Near you in Runcton

Locally, our jobs take us to homes close to North Mundham Primary School, Chichester Free School and The Parish Church of St Stephen and the streets around them. For rail, the closest station is Chichester station, roughly 1.9 miles north-west of the centre. Other landmarks nearby include Chichester Castle (2.1 miles north-west) and The Chichester City Museum (2 miles north-west).

Map of Runcton © OpenStreetMap contributors
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.