Surrey · England
Non-slip bath & shower coating in Rushmoor, Surrey
Clear non-slip coatings for baths and shower trays for homes and businesses in Rushmoor and across Surrey. Free, fixed quotes from your pictures.
- Worn-out textured areas
- Resurfaced baths that are now too smooth
- A bath or tray that is slippery when wet
DIY repairs versus a professional job
It’s tempting to reach for a kit, but the repairs we redo most often are DIY ones that have discoloured or lifted. Getting it right first time is normally cheaper.
A DIY attempt is not a disaster. We take the old repair out and do it properly, so it will not stop us repairing it. It does add a little time, so tell us about it when you send photos.
About our non-slip bath coating in Rushmoor
It suits older people, families and holiday lets. The coating is clear and textured, so it shows only as a slightly matt area where you stand. We work on wet room floors (ask us), shower trays and resurfaced baths, and the jobs we see most are resurfaced baths that are now too smooth and safety for older or less mobile people.
You are covered after we leave: each job carries a one-year guarantee, and we’ll explain exactly what it covers when we quote. Clean with a soft brush and a mild cleaner. Don’t use abrasive pads on the textured area.
- Location
- Rushmoor (GU10)
- Region
- Surrey
- Guarantee
- A year, on every repair
- Quote
- Free, fixed price from pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
The process
Here’s how a visit generally runs: we arrive at the agreed slot, protect everything around the work area, do the job and tidy away. Allow a few hours from start to finish. Before leaving, we tell you when it can be used and what to avoid for the first few days.
- First the standing area is cleaned and degreased.
- The area to be treated is masked out.
- We apply the clear textured coating.
- We remove the masking for a neat edge.
- The coating is left to cure before use, generally overnight.
Getting ready for the visit
- Let us know if it has been repaired before
- Open a window if you can
- Clear the area around the damage
Getting a price
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath or shower tray, include your postcode and send them over. You’ll get a fixed quote, not an estimate.
Related advice
When we would advise against a repair
A repair isn’t right for every job, for example:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
If in doubt, send photos and we will say what we think.
What we work on
- Enamelled baths
- Wet room floors (ask us)
- Shower trays
- Acrylic baths
- Resurfaced baths
Where we work around Rushmoor
Rushmoor is about 4 miles south-east of Farnham, in Surrey. Our work suits any type of property, from flats and terraces to detached houses and new builds, plus businesses and rented homes. We work in all 395 towns and villages across Surrey. You can also see our page for London, about 37 miles away.
We cover every part of the GU10 postcode area. We regularly work on streets such as Sandy Lane, Lowicks Road and Tilford Road. Neighbouring places we cover include Tilford Common (1 mile north), Pitch Place (1 mile south-east), Crosswater (1 mile south-west), Thursley (2 miles east) and Green Cross (2 miles south). Within a short drive, we also cover Guildford (10 miles north-east), Woking (13 miles north-east), Camberley (12 miles north), Farnham (4 miles north-west), Frimley (11 miles north) and Haslemere (5 miles south).
What’s near Rushmoor
Locally, our jobs take us to homes close to Bel And The Dragon-Churt pub and The Flashes, among other places. Rushmoor’s nearest station is Farnham station, roughly 4.2 miles north-west of the centre. Other landmarks nearby include Haslemere and District Hospital (4.9 miles south) and Farnham Castle (4.8 miles north-west). Green spaces nearby include Gibbet Hill and Upper Lake.
What we are called out for in Rushmoor
Baths and trays are made smooth so they’re easy to clean, yet with soap and water on them they become slippery. Textured areas on older baths wear smooth too.
You may need us if you’ve spotted any of these:
- Worn-out textured areas
- Safety for older or less mobile people
- A bath or tray that is slippery when wet
- Resurfaced baths that are now too smooth
Questions to ask before you book
- Whether there are any call-out or travel charges
- What the guarantee covers, and for how long
- What prep work is covered
- How the room is protected while they work
Repair or replace in Rushmoor?
The alternatives are a new textured bath or tray, or relying on a mat, which traps water and needs cleaning. A coating treats your existing bath or tray. Our prices are the same across the UK, so there is no premium for Rushmoor. What changes the price is the job itself: the material, the amount of damage and how many items.
Why book with us
- Every repair guaranteed for a year
- Free fixed quotes from pictures
- We leave the room as we found it
- Honest advice, even when it means no job
Take a look at our full price list.
Towns and villages near Rushmoor
Also in Rushmoor
Landlord and trade work in Rushmoor
We carry out planned and one-off repairs for housing associations and facilities teams in Surrey and across the UK. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We’re CHAS, Constructionline and SafeContractor accredited.
What affects the price in Rushmoor
Quotes are free and the price is fixed. What we look at:
- Whether we combine several jobs
- Unusual colours or finishes
- The type of damage
- The material
Rather than charging by the hour, we price the entire job up front. It depends on the damage, the material and access, and combining items on one visit brings it down.
Getting a price from photos
When you take your photos, these tips help us give you a firm price:
- Any earlier repairs or coatings
- A wider photo showing the whole bath or shower tray
- What it’s made of, if you know
- Something in shot to show the size
Pricing is simple: snap the damage close up and then the entire item, send them to us with your postcode, and we will reply with a fixed quote. Quotes are free and you’re under no obligation.
FAQs for Rushmoor
What if the damage is worse than the pictures show?
We stop, show you and agree any change before carrying on. Nothing extra is done without your say-so.
Can you price it without visiting?
Usually, yes. A close-up and a wider photo are enough to give a fixed price.
What information do you need?
Send photos through the quote form or call 0345 017 0787, and we’ll do the rest.
Is it worth repairing rather than replacing?
Generally, if the item is otherwise sound. A repair avoids removal and making good. We’ll tell you honestly if replacement makes more sense.
What does non-slip bath coating cost?
Every job gets a fixed quote based on pictures of the damage. Send a close-up and a photo of the whole item with your GU10 postcode.
Will I see the coating?
Very little: the treated area looks slightly matt.
Is a non-slip bath easy to clean?
Yes. Use a soft brush and a mild cleaner.
Do you charge for travel?
We don’t add a call-out fee. The fixed price covers the visit and the work.
About our accreditations · Every repair comes with a one-year guarantee.
