Norfolk · England

Non-Slip Bath Coating for Saham Toney homes

Non-slip bath coating across Saham Toney and nearby, done in a single visit in most cases and guaranteed for a year.

  • Safety for older or less mobile people
  • A bath or tray that is slippery when wet
  • Bath mats that harbour mould or get forgotten
Surface Doctor technician refinishing the outside of a roll-top bath

Non-slip bath coating for Saham Toney homes

About our non-slip bath coating in Saham Toney

It suits older people, families and holiday lets. It’s a clear, textured coating, so it shows only as a slightly matt area where you stand. If you’re dealing with worn-out textured areas and safety for older or less mobile people, we can usually put it right, on resurfaced baths, wet room floors (ask us) and shower trays alike.

Big or small, you get the same one-year guarantee. Clean with a soft brush and a mild cleaner. Avoid scourers on the coating.

Discoloured square shower tray restored with a new white finish
Where
Saham Toney (IP25)
Area hub
Norfolk
Warranty
A year, on every repair
Quotes
Free and fixed, from your photos
Call
0345 017 0787
Last updated
23 October 2026

About Saham Toney

Saham Toney is about 9 miles south-west of Dereham, in Norfolk. Across the IP25 area, a technician comes to you. Our repair technicians cover all 797 towns and villages in Norfolk.

Postcode districts we cover here: IP25. That includes homes on Pound Hill, St George's Close and Bell Lane and the roads around them. If you’re just outside Saham Toney, we cover Watton (2 miles south-east), Ovington (2 miles east), Merton (2 miles south), Carbrooke (3 miles east) and Griston (3 miles south-east). Within a short drive, we also cover Thetford (12 miles south), Dereham (9 miles north-east), Wymondham (13 miles east), Attleborough (10 miles south-east), Swaffham (6 miles north-west) and Toftwood (8 miles north-east).

Landmarks near Saham Toney

Our customers here include homes close to Church of St George, Wayland Academy Norfolk and Parker's Church of England Primary School. A little further out are Museum 4 Watton (1.2 miles south-east). Not far away are Thompson Water and Saham Mere.

Map of Saham Toney © OpenStreetMap contributors

Questions from Saham Toney

What does non-slip bath coating cost?

Because every job differs, we price from pictures. You know the full cost before anything is booked.

Are you accredited?

We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.

Do I have to be there?

Someone needs to let us in and show us the job. You don’t need to watch us work.

Is a non-slip bath easy to clean?

Yes. Use a soft brush and a mild cleaner.

Will the price change on the day?

The price is fixed for what the pictures show. Anything extra is discussed before we begin.

Do you charge for travel?

No. Our quotes include travel, and we charge the same wherever you are.

Will you leave a mess?

Very little mess: we sheet and mask everything nearby, and we leave the room clean.

Is my repair covered?

Yes: twelve months. If there is a problem with the work in that time, we come back and put it right.

When to call us in Saham Toney

Baths and trays are made smooth so they’re easy to clean, yet with soap and water on them they become slippery. Textured areas on older baths wear smooth too.

Keep an eye out for these signs:

  • Worn-out textured areas
  • Safety for older or less mobile people
  • Resurfaced baths that are now too smooth
  • Bath mats that harbour mould or get forgotten

Comparing quotes

  • When it can be used again
  • What prep work is covered
  • Whether the price covers travel
  • How the room is protected while they work

10 questions to ask before you book

What non-slip bath coating costs

We do not charge extra for travel to Saham Toney. The price comes down to:

  • The colour and finish to match
  • How many items we do on one visit
  • Access to the area
  • How many areas need work

It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.

Send pictures for a quote

A couple of clear pictures is all it takes. Try to include:

  • Where you are, by postcode
  • A wider photo showing the entire bath or shower tray
  • Whether it’s been repaired or coated before
  • Something in shot to show the size

For most jobs, pictures are all we need to give you a price. Add a line about what happened and your postcode, and we will reply with a fixed quote and the earliest dates we have.

Landlords, agents and businesses in Saham Toney

We regularly work with letting and managing agents. Send the address, pictures and access details and we will handle the rest.

We regularly price jobs from inventory or check-out pictures. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.

Why repair rather than replace?

The alternatives are replacing the bath or tray with a textured one, or relying on a mat that needs lifting and cleaning. A non-slip coating adds grip to the bath you have. We charge the same wherever you are, with no extra for Saham Toney. The job itself decides the price: the material, the amount of damage and how many items.

Why book with us

  • One-year guarantee on every repair
  • Same prices wherever you are
  • CHAS and Constructionline accredited
  • Usually one visit, start to finish

See our full price list.

What happens on the day

A typical visit goes like this: we arrive on time, sheet and mask the area around the job, do the job and tidy away. Plan for a few hours from start to finish. Before we go, we’ll explain when it can be used and what to avoid for the first few days.

  1. We start by degreasing the area where you stand.
  2. We mask out the area to be treated.
  3. The clear textured coating is applied.
  4. We lift the masking for a clean edge.
  5. The coating is left to cure before use, typically overnight.

Preparing for the visit

  • Tell us about any previous repairs or coatings
  • Open a window if you can
  • Clear the area around the damage

Ask for a price

Getting a price is easy: take a close-up of the damage and a photo from further back, send them to us with your postcode, and we’ll reply with a fixed quote. Quotes are free and no obligation.

Send pictures for a quote

Read more

Should I try a DIY kit first?

The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.

If you do try a kit, read the instructions carefully, ensure the area is clean and completely dry, and do not use it until it has fully cured. If it does not work out, we can still repair it properly.

When we’d advise against a repair

A repair isn’t right for every job, for example:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

Send us photos and we’ll tell you honestly.

Materials we repair

  • Resurfaced baths
  • Acrylic baths
  • Enamelled baths
  • Wet room floors (ask us)
  • Shower trays
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.