Oxfordshire · England

Non-Slip Bath Coating for Shenington homes

Clear non-slip coatings for baths and shower trays for homes and businesses in Shenington and across Oxfordshire. Send photos for a free, fixed quote.

  • Bath mats that harbour mould or get forgotten
  • Resurfaced baths that are now too smooth
  • Safety for older or less mobile people
Surface Doctor technician refinishing the outside of a roll-top bath

Non-slip bath coating in Shenington

Landlords, agents and businesses in Shenington

We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We are CHAS, Constructionline and SafeContractor accredited.

We’re used to working with agents and managing companies. Send the address, pictures and access details and we’ll handle the rest.

How we handle non-slip bath coating in Shenington

It’s popular with homes with older or less mobile people, holiday lets and families. It’s a clear, textured coating, so it shows only as a slightly matt area where you stand. Whether it’s a bath or tray that is slippery when wet and resurfaced baths that are now too smooth, we can help, on resurfaced baths, shower trays and wet room floors (ask us) alike.

Whatever the size of the job, it’s backed by a one-year guarantee. Clean with a soft brush and a mild cleaner. Do not use abrasive pads on the textured area.

Before and after: an old shower tray refinished by Surface Doctor
Where
Shenington (OX15)
County
Oxfordshire
Warranty
12 months on all our work
Quotes
Free, fixed price from pictures
Phone
0345 017 0787
Page updated
23 October 2026

Where we work around Shenington

Shenington is about 5 miles west of Banbury, in Oxfordshire. From the centre of Shenington to the outlying streets, we offer exactly the same service: a fixed price, a tidy visit and a guarantee. Our repair technicians cover 443 places across Oxfordshire, from the larger towns to small villages. Our jobs stretch from Shenington to Birmingham (32 miles away).

Postcode districts we cover here: OX15. Streets in the area include Rattlecombe Road, The Level and Mill Lane, and we cover them all. Other places close to Shenington include Alkerton (1 mile east), Balscote (1 mile south-east), Epwell (2 miles south-west), Shutford (2 miles south-east) and Swalcliffe (3 miles south). Within a short drive, we also cover Banbury (5 miles east), Chipping Norton (10 miles south), Neithrop (4 miles east), Grimsbury (6 miles east), Ruscote (4 miles east) and Bloxham (6 miles south-east).

Around Shenington

Typical jobs here are in homes near Church of Holy Trinity, The Bell Inn and Shenington Church of England Primary School. Further afield, we also cover the area around Broughton Castle (4.1 miles south-east) and Horton General Hospital (5.6 miles east). For a walk, there’s Edge Hill and Woodford Bottom and Lamb's Pool.

Map of Shenington © OpenStreetMap contributors

Should I try a DIY kit first?

We understand the appeal of fixing it yourself. The trouble is that kit repairs often look fine at first and then fail, and the old filler has to come out before a proper repair.

DIY kits are sold for most surfaces, and they can tidy up a tiny mark. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.

The process

Expect a friendly, tidy visit. We confirm the time with you beforehand, cover and mask the work area, and get on with the job, which normally takes a few hours. If anything looks different from your pictures, we’ll talk to you before going ahead.

  1. We start by degreasing the area where you stand.
  2. Next we mask off the area.
  3. We put on the clear non-slip coating.
  4. We remove the masking for a neat edge.
  5. The coating is left to cure before use, typically overnight.

How to prepare

  • Let us know about parking or access
  • Open a window if you can
  • Tell us if there are stairs or a lift

Get a quote

Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the entire bath or shower tray, we can price the job without visiting.

Get a free quote

Related advice

When to call us in Shenington

Baths and trays are made smooth so they’re easy to clean, yet wet, soapy surfaces are slippery. Textured areas on older baths wear smooth too.

Most people get in touch after spotting something like this:

  • A bath or tray that is slippery when wet
  • Worn-out textured areas
  • Bath mats that harbour mould or get forgotten
  • Resurfaced baths that are now too smooth

What your quote should include

  • The length of the guarantee and what it covers
  • How changes to the job are handled
  • Who will actually do the work
  • How the room is protected while they work

How to compare quotes

What non-slip bath coating costs

A fixed quote means you know the cost before booking. We look at:

  • Previous DIY repairs that have to come out
  • How many areas need work
  • What the surface is made of
  • The type of damage

A few things move the price: access, material, the extent of the damage and whether we can do several items together. Send pictures and you’ll get a fixed figure.

Getting a price from pictures

Two or three clear pictures are usually enough. It helps if you send:

  • A coin or ruler next to the damage for scale
  • Good light, ideally daylight, without flash glare
  • Any earlier repairs or coatings
  • Your postcode, so we can check dates

Getting a price is easy: snap the damage close up and then the entire item, send them over with your postcode, and we’ll reply with a fixed price. There is no charge for the quote and you are under no obligation.

When a repair is not the answer

To be straight with you, some problems need a different fix:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

Not sure? Send pictures and we’ll give you a straight answer before booking.

Materials we repair

  • Resurfaced baths
  • Shower trays
  • Acrylic baths
  • Wet room floors (ask us)
  • Enamelled baths

Why repair rather than replace?

The alternatives are replacing the bath or tray with a textured one, or relying on a mat, which traps water and needs cleaning. A coating treats your existing bath or tray. We charge the same wherever you are, with no extra for Shenington. The job itself decides the price: how much damage, what it’s made of and how many items.

Why Shenington clients choose us

  • One price list for the entire UK
  • Dust sheets down, tidy finish
  • Work done at your home or business
  • CHAS, Constructionline and SafeContractor accredited

Read our full price list.

Questions from Shenington

Do you do work for letting agents?

Yes, often. We can quote for several properties together and work between tenancies.

What happens once I’ve sent pictures?

We look at the pictures and reply with a fixed price and some dates. If anything’s unclear, we will ask for another photo.

Will I see the coating?

Only slightly: it shows as a matt area where you stand.

How soon can you come?

It depends on the time of year and where you are. Send pictures with your postcode and we’ll reply with the earliest dates.

Can I add another job to the visit?

Yes. Combining jobs on one visit brings the cost down. Send photos of everything you’d like done.

Is it worth repairing rather than replacing?

Typically, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. We will tell you honestly if replacement makes more sense.

How do I clean it?

Yes. A soft brush and mild cleaner is all it needs.

How much does non-slip bath coating cost in Shenington?

Because every job differs, we price from pictures. You will get a fixed figure before booking.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.