Derby · England
Non-slip bath & shower coating in Sinfin, Derby
Non-slip bath coating in and around Sinfin: photo quotes, tidy work and a year’s guarantee.
- Worn-out textured areas
- Bath mats that harbour mould or get forgotten
- Resurfaced baths that are now too smooth
How we handle non-slip bath coating in Sinfin
The coating is clear and textured, so the bath looks much the same. It’s popular with older people, families and holiday lets. We are frequently asked to fix worn-out textured areas and safety for older or less mobile people, on enamelled baths, acrylic baths and wet room floors (ask us).
Whatever the size of the job, you get the same one-year guarantee. A soft brush and mild cleaner keep it clean. Don’t use abrasive pads on the textured area.
- Location
- Sinfin (DE24, DE23)
- Region
- Derby
- Cover
- A year, on every repair
- Price
- Free and fixed, from your photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
DIY kit or professional repair?
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
Sinfin questions
Will a non-slip coating change how my bath looks?
Very little: it shows as a matt area where you stand.
Will the price change on the day?
The price is fixed for what the photos show. If there’s more, we will tell you before starting.
How do I book?
Just pictures, your postcode and a contact number. On the day, we only need access to the room.
Do you come to Sinfin?
Yes. We work across the UK and come to Sinfin. Send us pictures for a fixed quote, or call 0345 017 0787.
Is it messy?
Dust sheets and masking go down before we start, and we clean up when we have finished.
It’s been repaired before. Can you still fix it?
Yes, regularly. Removing the old work can add time, and that is in the quote.
How soon can you come?
That depends on our diary for your area. We’ll offer you dates when we send your quote.
What happens next?
You get a fixed quote and available dates. If we need another angle, we will ask.
Towns and villages near Sinfin
More services for Sinfin
Landlords, agents and businesses in Sinfin
We work for landlords, letting agents and housing providers in Sinfin as well as householders. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
We carry out planned and one-off repairs for housing associations and facilities teams in Derby and across the UK. A repair avoids taking out and refitting, which is easier on the people living there.
Our work in Sinfin
Sinfin is about 2 miles south of Derby, in Derby. We work in every kind of home, from flats and terraces to detached houses and new builds, plus businesses and rented homes. Sinfin is one of 31 towns and villages in Derby where we work. We work right across the region, from Sinfin to Birmingham (about 33 miles away).
We cover every part of DE24 and DE23 and the streets around it. Whether you live on Islay Road, Sinfin Lane and Redwood Road or a nearby road, we can come to you. We also travel to Sunny Hill (1 mile north-west), Normanton (1 mile north), Allenton (2 miles east), Shelton Lock (2 miles east) and Barrow upon Trent (2 miles south). Within a short drive, we also cover Oakwood (5 miles north-east), Cathedral Quarter (3 miles north), Spondon (4 miles north-east), New Zealand (3 miles north), Allestree (5 miles north) and Alvaston (3 miles east).
What’s near Sinfin
Typical jobs here are in homes near Cottons Farm Primary Academy, Saint Stephen's Parish Church and The Ferrers Arms. For rail, the closest station is Peartree station, about 1.2 miles north-east of the centre. Further afield, we also cover the area around Derbion (2.6 miles north) and National Sikh Heritage Centre & Holocaust Museum (1.5 miles north-east).
When we’d advise against a repair
We’d rather lose a job than do one that will not last, so these are the limits:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
If in doubt, send pictures and we’ll say what we think.
What we work on
- Enamelled baths
- Acrylic baths
- Resurfaced baths
- Wet room floors (ask us)
- Shower trays
Common problems we fix in Sinfin
Baths and trays are made smooth so they’re easy to clean, but with soap and water on them they become slippery. Textured areas on older baths wear smooth too.
Typical reasons for a call-out include:
- A bath or tray that is slippery when wet
- Worn-out textured areas
- Safety for older or less mobile people
- Resurfaced baths that are now too smooth
Comparing quotes
- Whether the price covers travel
- How soon you can use it again
- Whether a trained technician does the job
- How the room is protected while they work
Should you replace it?
The alternatives are a new textured bath or tray, or relying on a mat, which traps water and needs cleaning. A coating adds grip to the bath you have. It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Send photos and you will get a fixed figure.
Why us?
- No extra charge for your area
- One-year guarantee on every repair
- CHAS and Constructionline accredited
- Nothing taken out or refitted
See our full price list.
What non-slip bath coating costs
There are no hourly rates or hidden extras. The price depends on:
- The material
- Any earlier repairs that need removing first
- The size and number of damaged areas
- The colour and finish to match
No two jobs are quite the same, so each one is priced on its own. The size and type of damage, the material and access all make a difference, and doing several things on one visit costs less than separate visits.
Getting a price from pictures
Before you send pictures, these tips help us give you a firm price:
- The material, if you know it
- One sharp close-up of the damage
- The postcode, so we can plan the visit
- Good light, ideally daylight, without flash glare
We price from photos so you do not have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and we’ll come back with a fixed figure.
The process
On the day itself, there is little for you to do. Let us in and show us the room, and we will get on with it. Most visits take a few hours, including clearing up.
- We start by degreasing the area where you stand.
- The area to be treated is masked out.
- We apply the clear textured coating.
- The masking comes off to leave a neat edge.
- Once it has cured, normally overnight, it’s ready.
Before we arrive
- Let us know if it has been repaired before
- Make sure the area is dry
- Plan for the room to be out of bounds to pets and children
Getting a price
Getting a quote takes a couple of minutes: photograph the damage, then the entire bath or shower tray, add your postcode and send them over. What comes back is a fixed price, not a guess.
Read more
About our accreditations · Every repair comes with a one-year guarantee.
