Derby · England

Bath chip & crack repair in Sinfin, Derby

Bath repair for Sinfin, without a refit. Get a fixed price from your pictures, then book a visit.

  • Repairs from £95
  • Damage done while the bathroom was being fitted
  • Hairline or through cracks in acrylic
Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair in Sinfin

DIY repairs versus a professional job

Kits are cheap and easy to find, but the repairs we redo most often are DIY ones that have discoloured or lifted. Doing it properly first is usually the cheaper route.

We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.

Bath repair in Sinfin without replacing anything

Whatever has happened to the bath, we aim for the same result: a repair that’s smooth, sound and hard to spot. We prepare the area properly, fill and shape it, then match the colour and gloss so it sits flush with the rest of the bath. We are frequently asked to fix a cracked acrylic bath and scratches you can feel with a fingernail, on acrylic, cast iron enamel and roll-top & freestanding.

The work is guaranteed for twelve months. If something isn’t right in that time, we come back and put it right.

Rusty chip next to a bath plughole, before and after repair
Location
Sinfin (DE24, DE23)
Region
Derby
Warranty
One year on every repair
Quote
From £95. Free, fixed price from pictures
Telephone
0345 017 0787
Page updated
23 October 2026

Repairs by material

Composite and resin

Stone resin and composite baths are heavy and solid, and frequently freestanding. Chips and scratches are filled and matched, just like other baths.

Acrylic

Acrylic baths are moulded sheet reinforced underneath. They don’t rust, but they can crack, scratch or be holed, and a crack only stays repaired if it’s supported underneath.

What bath repair costs

Repairs from £95. There’s no area surcharge for Sinfin. The price reflects:

  • The material
  • How many areas need work
  • Doing more than one item at once
  • How easy the damage is to reach

A repair typically costs much less than people expect, particularly next to the cost of replacement. Send photos and we will give you the exact figure.

Quotes from your photos

Almost every job we do is priced from pictures. This is what we need:

  • Something in shot to show the size
  • Daylight if possible, and no flash reflection
  • Details of any past repairs
  • One sharp close-up of the damage

Upload pictures of the damage and a wider shot of the whole item, with your DE24 postcode, and we will come back with a fixed quote.

How the visit works

Once we’re through the door, we keep the work contained to the one room. We mask off everything nearby, the work takes a morning or an afternoon, and we finish by cleaning up and talking you through the result.

  1. We clean the area and remove any loose enamel or rust.
  2. We fill the damage and sand it flush with the surrounding surface.
  3. We mix the colour on the day to match your bath’s exact shade.
  4. We apply the finish coats and polish the repair so it blends in.
  5. We leave it to cure; you can typically use the bath the following day.

Preparing for the visit

  • Let us know which floor the room is on
  • Make sure the room can be ventilated
  • Have somewhere for us to park nearby if possible

Getting a price

For a price in Sinfin, the easiest route is pictures: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.

Send pictures for a quote

Read more

What we cannot put right

A few problems are outside what a surface repair can do:

  • Water coming from the waste or taps rather than the bath
  • Metal that has corroded all the way through
  • Cracks in parts of an acrylic bath we cannot get to from below

Not sure? Send photos and we’ll give you a straight answer.

What we work on

  • Cast iron enamel
  • Roll-top & freestanding
  • Acrylic
  • Pressed steel enamel
  • Whirlpool & spa baths

Your questions about bath repair in Sinfin

I’m a tenant. Can you help?

Of course. Check with your landlord; we can send the quote to them too.

Is it worth repairing rather than replacing?

In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it isn’t worth repairing, we will tell you.

Will it make a mess?

No. The work area is masked and covered, and we leave the room clean.

Can pets and children be at home?

Just keep them out of the work area. We will tell you when the room can be used again.

Are you accredited?

We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.

Is there a guarantee?

Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.

Will I be able to see the repair?

On a glossy bath, you’ll struggle to find it. On worn enamel, it can look shinier than the rest.

Can you match an avocado or pink bath?

Yes. We mix the colour on the day to match, including pastel and older colours.

Should you replace it?

A new bath costs more than the bath itself: removal and disposal, plumbing, a new panel, tiling and decorating. A repair is one job, done in one visit. Our bath repair starts from £95. A repair is priced on what needs doing, not your postcode. You will see the full price before you book, with nothing added on the day.

What you get with us

  • Usually one visit, start to finish
  • Colour-matched on site
  • Fixed prices from your pictures
  • A year’s guarantee on all work

Read our pricing and guide to resurfacing and replacement costs.

Work for landlords and builders

Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover. We hold CHAS, Constructionline and SafeContractor accreditations.

Letting agents often send us pictures straight from the inventory. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.

How to look after the repair

So the finish stays in good condition:

  • Rinse the bath after use, especially in hard water areas
  • Check that an acrylic bath does not move when you stand in it
  • Do not leave a fresh chip for long
  • Cover the bath during DIY or decorating

Treat the repaired area like the rest of the bath: a soft cloth and washing-up liquid is all it needs. Avoid scourers and gritty cream cleaners.

A small chip is a quick job. Left alone, they stain and can rust, so it’s worth getting them done early.

Where we work around Sinfin

Sinfin is about 2 miles south of Derby, in Derby. Whether you’re in the middle of Sinfin or on the outskirts, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. We work in all 31 towns and villages in Derby, from the larger towns to small villages. You can also see our page for Birmingham, about 33 miles away.

Here we cover the DE24 and DE23 postcode area. That includes homes on Islay Road, Sinfin Lane and Redwood Road. Neighbouring places we cover include Sunny Hill (1 mile north-west), Normanton (1 mile north), Allenton (2 miles east), Shelton Lock (2 miles east) and Barrow upon Trent (2 miles south). Within a short drive, we also cover Oakwood (5 miles north-east), Cathedral Quarter (3 miles north), Spondon (4 miles north-east), New Zealand (3 miles north), Allestree (5 miles north) and Alvaston (3 miles east).

What’s near Sinfin

Locally, our jobs take us to homes close to Cottons Farm Primary Academy, Saint Stephen's Parish Church and The Ferrers Arms. The closest station to Sinfin is Peartree station, roughly 1.2 miles north-east of the centre. A little further out are Derbion (2.6 miles north) and National Sikh Heritage Centre & Holocaust Museum (1.5 miles north-east).

Map of Sinfin © OpenStreetMap contributors
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.