Shropshire · England

Non-slip bath & shower coating in Snailbeach, Shropshire

Clear non-slip coatings for baths and shower trays for homes and businesses in Snailbeach and across Shropshire. Send pictures for a free, fixed quote.

  • Worn-out textured areas
  • Safety for older or less mobile people
  • Resurfaced baths that are now too smooth
Surface Doctor technician refinishing the outside of a roll-top bath

Non-slip bath coating in Snailbeach

Signs you need non-slip bath coating in Snailbeach

Baths and trays are made smooth so they’re easy to clean, yet wet, soapy surfaces are slippery. The textured patch on an older bath also wears down over time.

Most people contact us after spotting something like this:

  • A bath or tray that is slippery when wet
  • Bath mats that harbour mould or get forgotten
  • Safety for older or less mobile people
  • Worn-out textured areas

Before booking anyone

  • How long it needs to cure
  • What happens if they find more damage
  • How the colour is matched
  • What prep work is covered

10 questions to ask before booking

About our non-slip bath coating in Snailbeach

The coating is clear and textured, so the bath looks much the same. It’s popular with homes with older or less mobile people, holiday lets and families. We are often asked to fix bath mats that harbour mould or get forgotten and safety for older or less mobile people, on enamelled baths, shower trays and resurfaced baths.

Peace of mind is built in: each job carries a one-year guarantee, and we will explain exactly what it covers when we quote. A soft brush and mild cleaner keep it clean. Avoid scourers on the coating.

Discoloured square shower tray restored with a new white finish
Where
Snailbeach (SY5)
Area hub
Shropshire
Cover
12 months on all our work
Quote
Free and fixed, from your photos
Call
0345 017 0787
Updated
23 October 2026

Work for landlords and builders

Landlords, letting agents and housing providers in Snailbeach use us as well as householders. Repairing between tenancies keeps void periods short, and it costs much less than replacing.

We carry out planned and one-off repairs for housing associations and facilities teams in Shropshire and across the UK. A repair avoids taking out and refitting, which matters when someone is living in the home.

Where we work around Snailbeach

Snailbeach is about 10 miles south-west of Shrewsbury, in Shropshire. Across the SY5 area, we carry out the work at your property. Snailbeach is one of 433 towns and villages in Shropshire where we work. You can also see our page for Birmingham, about 45 miles away.

Our visits in SY5 are booked in the same way as anywhere else. Close by, we cover Minsterley (2 miles north), Hopesgate (2 miles west), Horsebridge (2 miles north), Pentirvin (2 miles west) and Bentlawnt (3 miles west). We also work in nearby towns such as Shrewsbury (10 miles north-east), Coleham (10 miles north-east), Kingsland (10 miles north-east), Belle Vue (10 miles north-east), Monkmoor (11 miles north-east) and Bagley (10 miles north-east).

Landmarks near Snailbeach

We visit homes around St Luke, among other places. Other landmarks nearby include Habberley Hall (1.7 miles north-east).

Map of Snailbeach © OpenStreetMap contributors

Repair or replace: which is better?

The alternatives are replacing the bath or tray with a textured one, or relying on a mat that needs lifting and cleaning. A coating treats your existing bath or tray. The price depends on the type and amount of damage, what it’s made of and how many jobs we combine into one visit. We give a fixed price from your pictures, so there are no surprises on the day.

Why us?

  • CHAS, Constructionline and SafeContractor accredited
  • Straight answers about what a repair can do
  • One-year guarantee on every repair
  • No need to remove anything

Take a look at our pricing.

Snailbeach questions

Is it safe with children and pets around?

Just keep them out of the work area. We will let you know when it’s safe to use again.

Does someone need to be in?

Yes. The technician needs access to the room for the visit, at a time that suits you.

What areas do you cover?

The whole UK, including all of Shropshire. Just include your postcode and we will confirm dates.

Can tenants book a repair?

Of course. Check with your landlord; we can send the quote to them too.

Is a non-slip bath easy to clean?

Yes. Use a soft brush and a mild cleaner.

What happens once I’ve sent photos?

We check the damage, the material and your postcode, then reply with a quote with dates.

Can you price it without visiting?

Nearly always. We only ask to see it in person if the photos cannot show what we need.

Will a non-slip coating change how my bath looks?

Very little: it shows as a matt area where you stand.

What affects the price in Snailbeach

Each job gets its own fixed price. This is what makes a difference:

  • Doing more than one item at once
  • Access to the area
  • The material and finish
  • Whether it’s a chip, crack, burn or wear

Instead of hourly rates, we price the entire job up front. Damage, material and access decide it.

How to get a fixed price

Almost every job we do is priced from pictures. This is what to send:

  • Something in shot to show the size
  • Your postcode, so we can check dates
  • Whether it’s been repaired or coated before
  • Good light, ideally daylight, without flash glare

Upload pictures of the damage and a wider shot of the whole item, with your SY5 postcode, and we’ll come back with a fixed quote.

DIY repairs versus a professional job

Kits are cheap and easy to find, but the repairs we redo most often are DIY ones that have discoloured or lifted. Getting it right first time is normally cheaper.

For a hairline mark somewhere you will never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.

What we do, step by step

Your technician turns up at the time we agreed with you and checks the damage against your pictures first. Dust sheets and masking tape go down before we open a single tin. Most visits take a few hours, and we leave the room as we found it.

  1. We start by degreasing the area where you stand.
  2. The area to be treated is masked out.
  3. The clear textured coating is applied.
  4. We lift the masking for a clean edge.
  5. Once it has cured, normally overnight, it’s ready.

Preparing for the visit

  • Tell us about any previous repairs or coatings
  • Mention any parking restrictions or tricky access
  • Ensure the room can be ventilated

Ask for a price

A quote takes minutes to ask for: photograph the damage, then the entire bath or shower tray, add your postcode and send them over. You will get a fixed quote, not an estimate.

Get a fixed price

Related advice

Honest limits

Before you book, it’s worth knowing the limits:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

Not sure? Send photos and we’ll give you a straight answer.

Materials we repair

  • Wet room floors (ask us)
  • Acrylic baths
  • Shower trays
  • Enamelled baths
  • Resurfaced baths
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.