Kent · England

Non-Slip Bath Coating in Sole Street

Non-slip bath coating across Sole Street and nearby, done in a single visit in most cases.

  • Bath mats that harbour mould or get forgotten
  • Safety for older or less mobile people
  • Resurfaced baths that are now too smooth
Surface Doctor technician refinishing the outside of a roll-top bath

Non-slip bath coating in Sole Street

Non-slip bath coating at your home in Sole Street

It’s a clear, textured coating, so it shows only as a slightly matt area where you stand. It’s popular with homes with older or less mobile people, holiday lets and families. We are frequently asked to fix a bath or tray that is slippery when wet and safety for older or less mobile people, in acrylic baths, resurfaced baths and enamelled baths.

Your repair is guaranteed for a year, as with every job we do. A soft brush and mild cleaner keep it clean. Avoid scourers on the coating.

Where
Sole Street (DA13, DA12)
County
Kent
Warranty
A year, on every repair
Quote
Free and fixed, from your photos
Phone
0345 017 0787
Last updated
23 October 2026
Before and after: an old shower tray refinished by Surface Doctor

What non-slip bath coating costs

Prices are worked out job by job, from your photos. What matters most is:

  • Any earlier repairs that need removing first
  • Where the damage is and how we get to it
  • How many items we do on one visit
  • How much damage there is

A repair typically costs much less than people expect, especially compared with replacing and refitting. Photos let us give you the exact figure.

Getting a price from photos

Two or three clear pictures are typically enough. It helps if you send:

  • Whether it’s been repaired or coated before
  • Something in shot to show the size
  • Daylight if possible, and no flash reflection
  • A photo taken from further back

A quote takes minutes to ask for: take one close-up and one wider shot of the bath or shower tray, add your postcode and send them over. You will get a fixed quote, not an estimate.

What we can’t put right

Not everything can be repaired, and we will tell you before we start. Repairs won’t solve:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

Not sure? Send pictures and we’ll give you a straight answer.

Materials we work on in Sole Street

  • Resurfaced baths
  • Enamelled baths
  • Wet room floors (ask us)
  • Acrylic baths
  • Shower trays

DIY repairs versus a professional job

What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.

It’s natural to want to try a repair yourself. The trouble is that kit repairs frequently look fine at first and then fail, and the old filler has to come out before a proper repair.

Common problems we fix in Sole Street

Smooth surfaces are easy to clean, but with soap and water on them they become slippery. Textured areas on older baths wear smooth too.

Common reasons people in Sole Street contact us include:

  • Bath mats that harbour mould or get forgotten
  • Resurfaced baths that are now too smooth
  • Worn-out textured areas
  • Safety for older or less mobile people

What your quote should include

  • How the colour is matched
  • What prep work is covered
  • Whether the price covers travel
  • How long the guarantee is and what it covers

Choosing a repair company

What we do, step by step

We begin by going over the job with you, so there are no surprises. After that, protection goes down around the work area and the work begins. You can expect it to take a few hours, and we’ll keep you posted as we go.

  1. First the standing area is cleaned and degreased.
  2. We mask out the area to be treated.
  3. We apply the clear textured coating.
  4. We remove the masking for a neat edge.
  5. We leave it to cure, generally overnight.

Getting ready for the visit

  • Mention any parking restrictions or tricky access
  • Mention if the room is upstairs or in a flat
  • Move bottles, mats and clutter away from the area

Getting a price

There’s no need for us to visit first. Nearly every job can be priced from photos: we need a close-up, a wider picture and your postcode, and we’ll come back to you with a fixed figure.

Get a free quote

Read more

Your questions about non-slip bath coating in Sole Street

Is a repair better than a new one?

In most cases, yes. A repair skips the removal, fitting and redecorating. If it is not worth repairing, we will tell you.

How much does non-slip bath coating cost in Sole Street?

The exact price depends on the damage, so we quote from photos. You’ll get a fixed figure before you book.

Do you do work for letting agents?

We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.

How do I clean it?

Yes. Use a soft brush and a mild cleaner.

Is it OK to have pets in the house?

Please keep children and pets out of the room during the visit and until it has cured. Everywhere else in the home is fine.

Will a non-slip coating change how my bath looks?

Very little: it shows as a matt area where you stand.

How soon can you come?

Your quote comes with available dates. If it’s urgent, say so and we will do what we can.

Are you a vetted contractor?

Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.

Repairing versus replacing in Sole Street

The alternatives are replacing the bath or tray with a textured one, or relying on a mat, which traps water and needs cleaning. A non-slip coating treats your existing bath or tray. No two jobs are quite the same, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all make a difference, and combining jobs on one visit brings the cost down.

Why choose Surface Doctor in Sole Street

  • No extra charge for your area
  • Typically one visit, start to finish
  • Fixed prices from your pictures
  • Every repair guaranteed for a year

See our pricing.

Our work in Sole Street

Sole Street is about 3 miles south of Gravesend, in Kent. We visit customers in Sole Street, so nothing has to leave your home. We cover 922 places across Kent. You can also see our page for London, about 22 miles away.

Every address in DA13 and DA12 is within our area. Streets in the area include Scratton Fields, Sole Street and Manor Road, all of which we cover. We also travel to Gold Street (1 mile east), Round Street (1 mile north), Henley Street (1 mile south-east), Meopham (1 mile south-west) and Foxendown (1 mile south). We also work in nearby towns such as Maidstone (10 miles south-east), Dartford (8 miles north-west), Sevenoaks (11 miles south-west), Gravesend (3 miles north), Tonbridge (14 miles south) and Northfleet (4 miles north-west).

Near you in Sole Street

In Sole Street, that means homes near Meopham School, Cobham Primary School and The Railway Inn and the streets around them. Other local landmarks include St Mary's Room (less than half a mile south) and Camer Park Country Park (0.7 miles south-west). There’s a railway station in Sole Street itself: Sole Street station. Well-known places in the area include Gravesham Museum (3.9 miles north) and Gravesham Community Hospital (4 miles north). For a walk, there is Ranscombe Farm and Gad's Hill.

Map of Sole Street © OpenStreetMap contributors

For landlords and businesses

We regularly work with letting and managing agents. Just send pictures, the address and how to get access and we will arrange it.

Landlords, letting agents and housing providers in Sole Street use us as well as householders. Repairing between tenancies keeps void periods short, and it generally costs far less than a refit.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.