Gloucestershire · England
Non-slip bath & shower coating in Southam, Gloucestershire
Non-slip bath coating in and around Southam: a fixed quote from pictures, a tidy visit and a one-year guarantee.
- Bath mats that harbour mould or get forgotten
- Resurfaced baths that are now too smooth
- A bath or tray that is slippery when wet
What we’re called out for in Southam
Baths and trays are made smooth so they’re easy to clean, but with soap and water on them they become slippery. The textured patch on an older bath also wears down over time.
Customers normally contact us about:
- Resurfaced baths that are now too smooth
- A bath or tray that is slippery when wet
- Worn-out textured areas
- Safety for older or less mobile people
What to look for in a quote
- What happens if the damage is worse than the pictures show
- What preparation is included
- A fixed quote, and whether VAT is included
- How the colour is matched
How we handle non-slip bath coating in Southam
It suits older people, families and holiday lets. The coating is clear and textured, so it shows only as a slightly matt area where you stand. Common call-outs are for bath mats that harbour mould or get forgotten and safety for older or less mobile people, on acrylic baths, shower trays and enamelled baths.
Your repair is guaranteed for a year, as with every job we do. A soft brush and mild cleaner keep it clean. Don’t use abrasive pads on the textured area.
- Location
- Southam (GL52)
- Area hub
- Gloucestershire
- Warranty
- 12 months on all our work
- Price
- Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Places near Southam
More services for Southam
Should you replace it?
Instead, you could go for a new textured bath or tray, or a bath mat that needs lifting and cleaning. A non-slip coating adds grip to the bath you have. We don’t add extras on the day. What we quote from your photos is what you pay, unless the damage turns out to be different, in which case we talk to you first.
Why book with us
- Work done at your home or business
- One visit for most repairs
- A year’s guarantee on all work
- Free fixed quotes from pictures
See our full price list.
What a repair cannot fix
A repair is not always the answer, and we would rather say so up front. Repairs will not solve:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
Send us pictures and we’ll tell you honestly before you book.
Surfaces we repair
- Wet room floors (ask us)
- Shower trays
- Acrylic baths
- Resurfaced baths
- Enamelled baths
Landlords, agents and businesses in Southam
We regularly price jobs from inventory or check-out pictures. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover so nothing needs replacing. We are CHAS, Constructionline and SafeContractor accredited.
Southam: your questions answered
What if the damage is worse than the photos show?
Your quote covers the damage in the photos. If there is more, we’ll tell you before starting.
Do the materials smell?
There can be some smell while we work, which is why we ventilate. It clears as the materials cure.
What happens next?
We look at the pictures and reply with a fixed quote and some dates. If anything’s unclear, we’ll ask for another photo.
Is a non-slip bath easy to clean?
Yes. Use a soft brush and a mild cleaner.
Will a non-slip coating change how my bath looks?
Only slightly: the treated area looks slightly matt.
What does non-slip bath coating cost?
Every job gets a fixed quote based on pictures of the damage. Send a close-up of the damage and a wider photo with your GL52 postcode.
Can tenants book a repair?
We can work for tenants, landlords or agents. Just ensure the landlord agrees.
Can you repair something that’s been repaired before?
Generally, yes. We remove the old repair before doing a new one.
The process
Once we’re through the door, we keep the work contained to the one room. Surfaces nearby are masked off, the job takes a morning or an afternoon, and we finish with a tidy-up and a look at the finished work together.
- First the standing area is cleaned and degreased.
- We mask out the area to be treated.
- We put on the clear non-slip coating.
- We lift the masking for a clean edge.
- We leave it to cure, usually overnight.
Preparing for the visit
- Clear the area around the damage
- Make sure the room can be ventilated
- Keep a parking space free if you can
Get a quote
A quote takes minutes to ask for: take one close-up and one wider shot of the bath or shower tray, add your postcode and send them to us. You will get a fixed price, not an estimate.
Advice
DIY repairs versus a professional job
If you are set on a kit, follow its instructions closely, make sure the area is clean and completely dry, and do not use it until it has fully cured. If it fails, we can still put it right.
It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is generally the cheaper route.
How we price non-slip bath coating
There’s no area surcharge for Southam. What changes the price is:
- Doing more than one item at once
- Whether old repairs or coatings need taking off
- The colour and finish to match
- Whether it’s a chip, crack, burn or wear
Instead of hourly rates, we fix the price before we start. It depends on the damage, the material and access, and doing several items at once reduces it.
Quotes from your photos
It only takes a minute to photograph the damage, and it saves a visit. Try to send:
- A picture taken from further back
- Good light, ideally daylight, without flash glare
- A coin beside the damage so we can judge size
- One sharp close-up of the damage
For most jobs, pictures are all we need to give you a price. Tell us what happened and where you are, and we will send back a fixed quote and some dates.
Our work in Southam
Southam is about 2 miles south-east of Bishop's Cleeve, in Gloucestershire. Anywhere in GL52, we come to you. Our repair technicians cover all 470 towns and villages across Gloucestershire, from the larger towns to small villages. Our jobs stretch from Southam to Birmingham (38 miles away).
Here we cover the GL52 postcode area. Jobs here include addresses on Haymes Drive, New Road and Ashleigh Lane and the roads around them. Nearby, we also work in Cleeve Hill (1 mile north-east), Woodmancote (1 mile north), Prestbury (1 mile south), Bishop's Cleeve (2 miles north-west) and Whaddon (2 miles south). Larger places within reach include Cheltenham (3 miles south-west), Gloucester (10 miles south-west), Stroud (15 miles south-west), Tewkesbury (6 miles north-west), St Paul's (3 miles south-west) and Lansdown (3 miles south-west).
What’s near Southam
In Southam, that means homes near Church of the Ascension, Cleeve School and Woodmancote School. Southam’s nearest station is Cheltenham Spa station, about 3.6 miles south-west of the centre. Nearby you’ll also find British Steeplechasing Hall of Fame (1.5 miles south-west) and Cheltenham General Hospital (3.1 miles south-west). Not far away are Nottingham Hill.
About our accreditations · Every repair comes with a one-year guarantee.
