Wirral · England
Non-slip bath & shower coating in Spital, Wirral
Non-slip bath coating in Spital without the cost of replacing. Send us pictures for a fixed quote, then book a visit.
- Bath mats that harbour mould or get forgotten
- Worn-out textured areas
- Safety for older or less mobile people
Non-slip bath coating in Spital, done in place
It’s popular with homes with older or less mobile people, holiday lets and families. The coating is clear and textured, so it shows only as a slightly matt area where you stand. We regularly repair enamelled baths, resurfaced baths and shower trays, and common reasons people get in touch are resurfaced baths that are now too smooth and safety for older or less mobile people.
We guarantee the work for a year. If something is not right in that time, we come back and put it right. Clean with a soft brush and a mild cleaner. Avoid scourers on the coating.
- Where
- Spital (CH63, CH62)
- County
- Wirral
- Cover
- One year on every repair
- Price
- Free and fixed, from your photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
How the visit works
It’s a tidy, low-fuss visit. We confirm the time with you beforehand, protect the area, and get on with the job, which typically takes a morning or an afternoon. If we find something your photos didn’t show, we will explain it before carrying on.
- We clean and degrease the standing area.
- Next we mask off the area.
- We put on the clear non-slip coating.
- We lift the masking for a clean edge.
- The coating is left to cure before use, generally overnight.
How to prepare
- Keep a parking space free if you can
- Tell us about any previous repairs or coatings
- Make sure the room can be ventilated
Ask for a price
To get a price, send two or three photos using our quote form or call us. We’ll tell you honestly if a repair is the right fix.
Read more
How we price non-slip bath coating
Every quote is fixed and free. What we take into account:
- Whether it’s a chip, crack, burn or wear
- How many items we do on one visit
- How many areas need work
- The colour and finish to match
There are no surprise extras on the day. The price we quote from your photos is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
Send pictures for a quote
A couple of clear pictures is all it takes. It helps if you send:
- The material, if you know it
- Whether it’s been repaired or coated before
- Daylight if possible, and no flash reflection
- Your postcode, so we can check dates
Pricing is simple: snap the damage close up and then the entire item, send them to us with your postcode, and we will reply with a fixed price. Quotes are free and no obligation.
Spital questions
Do you do work for letting agents?
We do, regularly. We can quote for several properties together and work between tenancies.
Do you work in Spital?
We do. We send a technician to Spital for every job, and the price is the same as everywhere else.
Is my repair covered?
All our work carries a one-year guarantee. We will explain what it covers when we quote.
Is there any odour?
Expect a mild smell while we’re working, which fades afterwards.
What areas do you cover?
The whole UK, including all of Wirral. Send your postcode with your photos and we’ll offer you dates.
How do I get a price for non-slip bath coating in Spital?
Because every job differs, we price from photos. You’ll get a fixed figure before you book.
Is there a call-out fee?
We don’t add a call-out fee. The fixed price covers the visit and the work.
What if the damage is worse than the pictures show?
It’s rare, but if it happens we talk to you first. You decide whether to go ahead.
Can I fix it myself?
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
A DIY attempt is not a disaster. We remove the old filler and start again, so it won’t stop us repairing it. Just mention it when you send photos, as it can add time.
Signs you need non-slip bath coating in Spital
Baths and trays are made smooth so they’re easy to clean, yet with soap and water on them they become slippery. The textured patch on an older bath also wears down over time.
The most common problems we are called about are:
- A bath or tray that is slippery when wet
- Worn-out textured areas
- Resurfaced baths that are now too smooth
- Bath mats that harbour mould or get forgotten
Questions to ask before you book
- Whether a trained technician does the job
- Whether there are any call-out or travel charges
- How to care for the finish
- What protection goes down before work starts
Our work in Spital
Spital is about 1 mile west of Bebington, in Wirral. Book a date that suits you, and we will give you an arrival time in advance, so you’re not left waiting in all day. Spital is one of 44 towns and villages in Wirral where we work.
Our technicians cover all of the CH63 and CH62 postcode area. From Inley Road, Birch Road and Tyburn Road or a nearby road, a technician can come to you. Close by, we cover Poulton (1 mile south-west), Lower Bebington (1 mile north), Clatterbridge (1 mile south-west), Higher Bebington (1 mile north-west) and Brimstage (2 miles west). We also work in nearby towns such as Birkenhead (3 miles north-west), Wallasey (6 miles north), Heswall (4 miles west), Moreton (6 miles north-west), West Kirby (7 miles west) and Greasby (6 miles north-west).
Local landmarks in Spital
Our customers here include homes close to Wirral Grammar School for Boys, Poulton Lancelyn Primary School and Three Stags pub, among other places. Nearby too are Marfords Park (1.2 miles south), Wellington School (1 mile north) and St Andrew's Church (0.5 miles north). There is a railway station in Spital itself: Spital station. A little further out are Port Sunlight Museum (0.9 miles north) and Municipal Borough of Bebington (0.6 miles north). Not far away are Bidston Hill and Princes Park lake.
Nearby places to Spital
More services for Spital
Landlord and trade work in Spital
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover so nothing needs replacing. We’re CHAS, Constructionline and SafeContractor accredited.
Builders use us to fix snagging damage before handover, saving last-minute replacements. Several plots can be done in one visit to keep costs down.
What we can’t put right
We won’t take on work that won’t last, so here’s what a repair cannot put right:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
Send us pictures and we’ll tell you honestly before booking.
Surfaces we repair
- Shower trays
- Resurfaced baths
- Enamelled baths
- Wet room floors (ask us)
- Acrylic baths
Why repair rather than replace?
The alternatives are a new textured bath or tray, or relying on a mat that needs lifting and cleaning. A coating treats your existing bath or tray. What it costs depends on how much damage there is and what kind, what it’s made of and how many jobs we combine into one visit. You get a fixed price from your pictures, so there are no surprises on the day.
What you get with us
- We’ll tell you if it’s not worth repairing
- We come to you, anywhere in the UK
- Same prices wherever you are
- We leave the room as we found it
See our full price list.
About our accreditations · Every repair comes with a one-year guarantee.
