Cornwall · England

Non-Slip Bath Coating in St Keverne

Local non-slip bath coating for St Keverne: photo quotes, tidy work and a year’s guarantee.

  • Bath mats that harbour mould or get forgotten
  • A bath or tray that is slippery when wet
  • Resurfaced baths that are now too smooth
Surface Doctor technician refinishing the outside of a roll-top bath

Need non-slip bath coating in St Keverne?

Our work in St Keverne

St Keverne is about 7 miles south of Falmouth, in Cornwall. Jobs in St Keverne are booked in like any other job: a fixed quote from pictures, and a technician at your door on the day. We cover 644 places across Cornwall, from the larger towns to small villages.

Jobs in TR12 are booked in the same way as anywhere else. You’ll find streets such as High Street, The Square and Monastery Close, all of which we cover. We also cover the places around St Keverne: Laddenvean (1 mile north-west), Porthallow (1 mile north), Coverack (1 mile south), Tregidden (2 miles north-west) and Manaccan (3 miles north-west). We also work in nearby towns such as Truro (15 miles north), Falmouth (7 miles north), Camborne (15 miles north-west), Redruth (14 miles north-west), Helston (9 miles north-west) and Rosewarne (15 miles north-west).

Around St Keverne

We visit homes around The White Hart pub, Church of St Akeveranus and St Keverne Community Primary School and the streets around them. Not far away are Goonhilly Downs.

Map of St Keverne © OpenStreetMap contributors

About our non-slip bath coating in St Keverne

The coating is clear and textured, so the bath looks much the same. It suits older people, families and holiday lets. We regularly repair acrylic baths, shower trays and enamelled baths, and people most frequently call us about worn-out textured areas and a bath or tray that is slippery when wet.

Peace of mind is built in: each job carries a one-year guarantee, and we explain what it covers before you book. Clean with a soft brush and a mild cleaner. Do not use abrasive pads on the textured area.

Location
St Keverne (TR12)
County
Cornwall
Warranty
A year, on every repair
Price
Fixed and free, based on pictures
Call
0345 017 0787
Last updated
23 October 2026
Stained shower tray resurfaced to clean white, before and after

Do you need non-slip bath coating in St Keverne?

Smooth surfaces are easy to clean, but with soap and water on them they become slippery. Textured areas on older baths wear smooth too.

It’s worth getting a quote if you see:

  • Bath mats that harbour mould or get forgotten
  • Resurfaced baths that are now too smooth
  • Worn-out textured areas
  • A bath or tray that is slippery when wet

What to look for in a quote

  • Whether the price is fixed and includes VAT
  • When it can be used again
  • What happens if the damage is worse than the photos show
  • What protection goes down before work starts

Choosing a repair company

When we would advise against a repair

Honesty matters more than a booking, so here’s what a repair can’t fix:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

Send us pictures and we’ll tell you honestly before booking.

Materials we repair

  • Enamelled baths
  • Wet room floors (ask us)
  • Resurfaced baths
  • Shower trays
  • Acrylic baths

Your questions about non-slip bath coating in St Keverne

What information do you need?

Send photos through the quote form or call 0345 017 0787.

Do you work for landlords and businesses?

Yes. We work for landlords, agents, builders and businesses as well as homeowners.

Will there be a smell?

Some materials have a smell while they’re applied, which is why we ventilate. It fades as everything cures.

When can you do it?

Your quote comes with available dates. Tell us if you need it done quickly.

Will I see the coating?

Only slightly: the treated area looks slightly matt.

Will the price change on the day?

Your quote covers the damage in the pictures. Anything extra is discussed before we begin.

Is it worth repairing rather than replacing?

Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. We will be honest if it’s not worth it.

Do you hold any accreditations?

We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.

Work for landlords and builders

We work for landlords, letting agents and housing providers in St Keverne as well as homeowners. Repairing between tenancies keeps void periods short, and it generally costs far less than a refit.

Builders use us to fix snagging damage before handover, saving last-minute replacements. Several plots can be done in one visit to keep costs down.

Should I try a DIY kit first?

For a hairline mark somewhere you will never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.

A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send photos.

The process

On the day, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. The job typically takes a morning or an afternoon. We tidy up before we leave and let you know when you can use it again.

  1. We start by degreasing the area where you stand.
  2. Next we mask off the area.
  3. We apply the clear textured coating.
  4. We lift the masking for a clean edge.
  5. The coating is left to cure before use, generally overnight.

Getting ready for the visit

  • Let us know about parking or access
  • Mention if the room is upstairs or in a flat
  • Open a window if you can

Get a quote

We price from photos so you don’t have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and we will come back with a fixed figure.

Get a fixed quote

Related advice

Should you replace it?

Instead, you could go for replacing the bath or tray with a textured one, or a bath mat, which traps water and needs cleaning. A coating adds grip to the bath you have. We don’t add extras on the day. What we quote from your photos is what you pay, and if the damage turns out to be different, we discuss it before starting.

Why us?

  • A fixed quote before you book
  • Most jobs done in one visit
  • A year’s guarantee on all work
  • Everything repaired in place

See our pricing.

What affects the price in St Keverne

Each job gets its own fixed quote. These are the things that affect it:

  • The size and number of damaged areas
  • Any earlier repairs that need removing first
  • The type of damage
  • How many items we do on one visit

A repair is priced on what needs doing, not your postcode. You will see the full price before booking.

How to get a fixed quote

You can usually get a fixed price without us visiting. To help us price it:

  • What it’s made of, if you know
  • A coin beside the damage so we can judge size
  • A close-up of the damage, in focus
  • A picture taken from further back

Send us photos of the damage and one of the entire item, with your TR12 postcode, and we will reply with a fixed price.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.