Wigan · England

Non-Slip Bath Coating in Standish

Fixed-price non-slip bath coating in Standish and the surrounding area, done in a single visit in most cases.

  • Worn-out textured areas
  • A bath or tray that is slippery when wet
  • Resurfaced baths that are now too smooth
Surface Doctor technician refinishing the outside of a roll-top bath

Non-slip bath coating for Standish homes

What non-slip bath coating costs

We price every job individually. The main factors are:

  • Doing more than one item at once
  • Previous DIY repairs that have to come out
  • Access to the area
  • How hard the colour is to match

There are no surprise extras on the day. The price we quote from your photos is the price you pay, unless the damage turns out to be different, in which case we talk to you first.

Getting a price from photos

Two or three clear photos are normally enough. Try to include:

  • The postcode, so we can plan the visit
  • A wider photo showing the whole bath or shower tray
  • Something in shot to show the size
  • Any details about the material

There’s no need for us to visit first. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we’ll come back to you with a fixed figure.

Non-slip bath coating in Standish without replacing anything

It’s a clear, textured coating, so it shows only as a slightly matt area where you stand. It’s popular with older people, families and holiday lets. Whether it’s bath mats that harbour mould or get forgotten and worn-out textured areas, we can normally put it right, whatever the material.

You are covered for a year from the day of the repair. Just call us if there is a problem and we’ll sort it. Clean with a soft brush and a mild cleaner. Do not use abrasive pads on the textured area.

Area
Standish (WN6, WN1)
Area hub
Wigan
Cover
12 months on all our work
Quotes
Fixed and free, based on pictures
Telephone
0345 017 0787
Updated
23 October 2026
Before and after: an old shower tray refinished by Surface Doctor

When to call us in Standish

Smooth surfaces are easy to clean, but wet, soapy surfaces are slippery. Textured areas on older baths wear smooth too.

Send us a photo if you notice any of these:

  • Resurfaced baths that are now too smooth
  • Safety for older or less mobile people
  • A bath or tray that is slippery when wet
  • Worn-out textured areas

Before you book anyone

  • What protection goes down before work starts
  • What preparation is included
  • Whether a trained technician does the job
  • How to care for the finish

Our hiring checklist

Landlords, agents and businesses in Standish

We regularly price jobs from inventory or check-out pictures. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.

Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting. We hold CHAS, Constructionline and SafeContractor accreditations.

Should I try a DIY kit first?

For a hairline mark somewhere you will never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.

If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it does not stop a professional repair. Just mention it when you send photos, as it can add time.

Why repair rather than replace?

The alternatives are replacing the bath or tray with a textured one, or a bath mat, which traps water and needs cleaning. A non-slip coating treats your existing bath or tray. Our prices are the same across the UK, with no extra for Standish. What changes the price is the job itself: the material, the amount of damage and how many items.

Why choose Surface Doctor in Standish

  • Free fixed quotes from pictures
  • One visit for most repairs
  • Accredited with CHAS, Constructionline and SafeContractor
  • We come to you, anywhere in the UK

Take a look at our pricing.

The process

You don’t need to empty the room. We bring everything we need with us, put protection down and start once you are happy with the plan. Most jobs take a few hours, and you can get on with other things while we’re there.

  1. We start by degreasing the area where you stand.
  2. The area to be treated is masked out.
  3. We put on the clear non-slip coating.
  4. We remove the masking for a neat edge.
  5. We leave it to cure, generally overnight.

Getting ready for the visit

  • Clear the area around the damage
  • Make sure the room can be ventilated
  • Keep a parking space free if you can

How to get a price

Getting a quote takes a couple of minutes: photograph the damage, then the whole bath or shower tray, include your postcode and send them over. What comes back is a fixed price, not a guess.

Get a fixed price

Related advice

Common questions in Standish

Do you do work for letting agents?

Yes, frequently. We can quote for several properties together and work between tenancies.

Do you work in Standish?

We do. We send a technician to Standish for every job, and the price is the same as everywhere else.

Can you quote from pictures?

Nearly always. If pictures don’t show enough, we’ll ask for another angle.

Is there a guarantee?

Yes: twelve months. If there is a problem with the work in that time, we come back and put it right.

Can you do more than one item on the same visit?

Of course, and it normally saves money. Just add the extra items to your photos and we will quote them together.

How do I book?

Use the quote form or ring 0345 017 0787.

How do I get a price for non-slip bath coating in Standish?

Every job gets a fixed price based on pictures of the damage. Send a close-up of the damage and a wider photo and your postcode.

Do you charge for travel?

We do not add a call-out fee. Your fixed price includes everything.

Standish and the surrounding area

Standish is about 3 miles north of Wigan, in Wigan. We work in every kind of home, old or new, large or small, plus businesses and rented homes. We cover 63 places in Wigan. We work right across the region, from Standish to Liverpool (17 miles away).

All of WN6 and WN1 is within our area. That includes homes on High Street, Market Street and James Square. Being close to the A49 and A5106, Standish is easy for our repair technicians to reach. Neighbouring places we cover include Worthington (1 mile east), Shevington Moor (1 mile west), Red Rock (1 mile east), Shevington (2 miles south-west) and Crooke (2 miles south-west). Within a short drive, we also cover Wigan (3 miles south), Leigh (8 miles south-east), Ashton-in-Makerfield (6 miles south), Hindley (5 miles south-east), Atherton (8 miles south-east) and Ince-in-Makerfield (4 miles south-east). As one of the bigger places in Wigan, Standish is somewhere we visit frequently.

Local landmarks in Standish

Typical jobs here are in homes near Standish St Wilfrid's Church of England Primary Academy, Church of St Wilfrid and Ashfield Park and the streets around them. Other local landmarks include The Globe pub (within half a mile south-west) and Standish Community High School (0.8 miles north-west). Standish’s nearest station is Gathurst station, about 2.4 miles south-west. Further afield, we also cover the area around Blackrod Castle Croft (3.3 miles east) and The Galleries (2.9 miles south).

Map of Standish © OpenStreetMap contributors

When a repair is not the answer

A few problems are outside what a surface repair can do:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

If in doubt, send photos and we’ll say what we think.

Surfaces we repair

  • Enamelled baths
  • Wet room floors (ask us)
  • Acrylic baths
  • Shower trays
  • Resurfaced baths
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.