Leicestershire · England
Non-Slip Bath Coating for Stanford on Soar homes
Non-slip bath coating in Stanford on Soar without the cost of replacing. Send us photos for a fixed price, then book a visit.
- Resurfaced baths that are now too smooth
- A bath or tray that is slippery when wet
- Safety for older or less mobile people
Non-slip bath coating at your home in Stanford on Soar
It’s a clear, textured coating, so the bath looks much the same. It’s popular with homes with older or less mobile people, holiday lets and families. We work on resurfaced baths, acrylic baths and enamelled baths, and common reasons people get in touch are worn-out textured areas and bath mats that harbour mould or get forgotten.
We stand behind the work with a one-year guarantee, so you are covered after the visit. Clean with a soft brush and a mild cleaner. Avoid scourers on the coating.
- Area
- Stanford on Soar (LE12)
- County
- Leicestershire
- Warranty
- One year on every repair
- Quotes
- Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Signs you need non-slip bath coating in Stanford on Soar
Smooth surfaces are easy to clean, but with soap and water on them they become slippery. Textured areas on older baths wear smooth too.
You may need us if you’ve spotted:
- Bath mats that harbour mould or get forgotten
- A bath or tray that is slippery when wet
- Worn-out textured areas
- Resurfaced baths that are now too smooth
Questions to ask before you book
- Whether there are any call-out or travel charges
- Whether the price is fixed and includes VAT
- How long it needs to cure
- How changes to the job are handled
What we cannot put right
In fairness, some problems need a different fix:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
If in doubt, send photos and we’ll say what we think before booking.
Materials we work on in Stanford on Soar
- Enamelled baths
- Acrylic baths
- Resurfaced baths
- Wet room floors (ask us)
- Shower trays
Repair or replace in Stanford on Soar?
The alternatives are a new textured bath or tray, or relying on a mat, which traps water and needs cleaning. A non-slip coating treats your existing bath or tray. It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
Why book with us
- Free fixed quotes from pictures
- CHAS and Constructionline accredited
- We leave the room as we found it
- We will tell you if it’s not worth repairing
Take a look at our full price list.
Covering Stanford on Soar
Stanford on Soar is about 2 miles north-east of Loughborough, in Leicestershire. We visit customers in Stanford on Soar and nearby villages, so nothing has to leave your home. Our repair technicians cover 287 places in Leicestershire. Our nearest city page is Birmingham, about 37 miles away.
Our visits in LE12 work the same way as everywhere else we cover. You will find streets such as Main Street, Village Farm Close and Normanton Lane. Other places close to Stanford on Soar include Cotes (1 mile south-east), Prestwold (2 miles east), Hoton (2 miles east), Woodthorpe (3 miles south) and Burton on the Wolds (3 miles east). Larger places within reach include Wigston (15 miles south), Melton Mowbray (13 miles east), Coalville (8 miles south-west), Ashby-de-la-Zouch (12 miles west), Shepshed (4 miles west) and Syston (8 miles south-east).
Around Stanford on Soar
Our customers here include homes close to Wymeswold Meadows, Limehurst Academy and Church of St John the Baptist. The closest station to Stanford on Soar is Loughborough station, about 1 mile south of the centre. Well-known places in the area include Old Rectory Museum (1.4 miles south) and Lemyngton (1 mile south-west).
Places near Stanford on Soar
What else we do in Stanford on Soar
Stanford on Soar questions
Are there extra charges for Stanford on Soar?
Travel is included in the price, and we charge the same wherever you are.
What does non-slip bath coating cost?
Every job gets a fixed quote from your pictures. Send a close-up and a photo of the entire item and your postcode.
Do you do work for letting agents?
Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses in Stanford on Soar.
Will a non-slip coating change how my bath looks?
Very little: the treated area looks slightly matt.
Do you hold any accreditations?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Will you leave a mess?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
How soon can you come?
It depends on the time of year and where you are. Send photos with your postcode and we will reply with the earliest dates.
Can I add another job to the visit?
Yes, and it’s frequently cheaper. Send pictures of everything together and we’ll quote them together.
Prices and what affects them
Prices are worked out job by job. The main factors are:
- Unusual colours or finishes
- How much damage there is
- How easy the damage is to reach
- The material
Instead of hourly rates, we price the whole job up front. Damage, material and access decide it.
How to get a fixed quote
It only takes a minute to photograph the damage, and it saves a visit. Try to send:
- Natural light rather than flash
- A wider photo showing the entire bath or shower tray
- The material, if you know it
- Any earlier repairs or coatings
You don’t need a survey visit. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we’ll reply with a fixed price.
Should I try a DIY kit first?
For a hairline mark somewhere you’ll never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
What happens on the day
It’s a tidy, low-fuss visit. We confirm the time with you beforehand, cover and mask the work area, then carry out the work, which typically takes a morning or an afternoon. If anything looks different from your photos, we’ll talk to you before going ahead.
- We clean and degrease the standing area.
- We mask out the area to be treated.
- We put on the clear non-slip coating.
- We lift the masking for a clean edge.
- Once it has cured, normally overnight, it’s ready.
Before we arrive
- Ensure the area is dry
- Mention any parking restrictions or tricky access
- Open a window if you can
Ask for a price
We price from pictures so you do not have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we will come back with a fixed figure.
Related advice
For landlords and businesses
Rental properties take more wear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
Letting agents frequently send us photos straight from the inventory. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
About our accreditations · Every repair comes with a one-year guarantee.
