Somerset · England
Non-Slip Bath Coating for Steart homes
Non-slip bath coating in Steart without the cost of replacing. Send us photos for a fixed price, then book a visit.
- Bath mats that harbour mould or get forgotten
- A bath or tray that is slippery when wet
- Safety for older or less mobile people
Non-slip bath coating at your home in Steart
It’s a clear, textured coating, so the bath looks much the same. It suits homes with older or less mobile people, holiday lets and families. Whether it’s bath mats that harbour mould or get forgotten and resurfaced baths that are now too smooth, we can generally put it right.
Peace of mind is built in: each job carries a one-year guarantee, and we’ll explain exactly what it covers when we quote. A soft brush and mild cleaner keep it clean. Do not use abrasive pads on the textured area.
- Area
- Steart (TA11)
- Area hub
- Somerset
- Warranty
- A year, on every repair
- Price
- Free and fixed, from your pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
DIY kit or professional repair?
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is usually the cheaper route.
If you are set on a kit, follow its instructions closely, ensure the area is clean and completely dry, and give it the full curing time. If it fails, we can still put it right.
Landlord and trade work in Steart
For developers and builders, we fix damage before handover, so there’s no need to replace a damaged item at the last minute. Several plots can be done in one visit.
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
What a repair can’t fix
We’ll always be straight with you, so here’s what a repair cannot fix:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
If in doubt, send photos and we will say what we think.
Materials we work on in Steart
- Acrylic baths
- Enamelled baths
- Resurfaced baths
- Shower trays
- Wet room floors (ask us)
How we price non-slip bath coating
There’s no area surcharge for Steart. What changes the price is:
- How many areas need work
- Whether we combine several jobs
- The colour and finish to match
- Where the damage is and how we get to it
Compared with replacing, a repair is typically a fraction of the price, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
Send pictures for a quote
We price nearly every job from photos. This is what to send:
- The postcode, so we can plan the visit
- The material, if you know it
- Natural light rather than flash
- A wider photo showing the whole bath or shower tray
Pricing is simple: take a close-up of the damage and a picture from further back, send them over with your postcode, and we’ll reply with a fixed quote. There’s no charge for the quote and you’re under no obligation.
Nearby places to Steart
Other services in Steart
The process
Arrival times are agreed in advance, so you’re not left guessing. On site, it takes a morning or an afternoon in most cases. The room is left tidy.
- We clean and degrease the standing area.
- Next we mask off the area.
- We put on the clear non-slip coating.
- The masking comes off to leave a neat edge.
- We leave it to cure, normally overnight.
Getting ready for the visit
- Open a window if you can
- Clear the area around the damage
- Tell us about parking, stairs or access
How to get a price
Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the whole bath or shower tray, we can price the job.
Advice
FAQs for Steart
Will I see the coating?
Only slightly: it shows as a matt area where you stand.
How do I clean it?
Yes. A soft brush and mild cleaner is all it needs.
Can you do more than one item on the same visit?
Of course, and it generally saves money. Send pictures of everything together and you will get one combined price.
Is there a call-out fee?
No. Our quotes include travel, and we charge the same wherever you are.
Is my repair covered?
Every repair comes with a one-year guarantee. We’ll explain what it covers when we quote.
How much does non-slip bath coating cost in Steart?
We give a fixed quote from your photos. Send a close-up of the damage and a wider photo with your TA11 postcode.
Does someone need to be in?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
Which areas do you work in?
All of Somerset, and the rest of the UK. There is no extra charge for travel.
Steart and the surrounding area
Steart is about 7 miles north of Yeovil, in Somerset. From the centre of Steart to the outlying streets, we offer exactly the same service: a fixed quote, a tidy visit and a guarantee. Our repair technicians cover all 640 towns and villages across Somerset, from the larger towns to small villages.
Here we cover the TA11 postcode area. Neighbouring places we cover include Babcary (1 mile north), Charlton Adam (2 miles west), Podimore (2 miles south-west), Charlton Mackrell (2 miles west) and Keinton Mandeville (2 miles north-west). Larger places within reach include Yeovil (7 miles south), Wells (11 miles north), Shepton Mallet (10 miles north), Street (7 miles north-west), Glastonbury (8 miles north-west) and Crewkerne (14 miles south-west).
Around Steart
Our customers here include homes close to Red Lion Inn and Church of the Holy Cross and the streets around them. Well-known places in the area include Haynes Motor Museum (2.9 miles east).
When to call us in Steart
Baths and trays are made smooth so they’re easy to clean, but with soap and water on them they become slippery. Textured areas on older baths wear smooth too.
These are the problems we are asked about most:
- Resurfaced baths that are now too smooth
- A bath or tray that is slippery when wet
- Worn-out textured areas
- Bath mats that harbour mould or get forgotten
Questions to ask before booking
- Who will actually do the work
- A fixed price, and whether VAT is included
- Whether there are any call-out or travel charges
- What aftercare is recommended
Repair or replace: which is better?
Instead, you could go for replacing the bath or tray with a textured one, or a bath mat that needs lifting and cleaning. A non-slip coating adds grip to the bath you have. There are no surprise extras on the day. What we quote from your pictures is what you pay, unless the damage turns out to be different, in which case we talk to you first.
Why choose Surface Doctor in Steart
- No extra charge for your area
- Every repair guaranteed for a year
- CHAS, Constructionline and SafeContractor accredited
- We’ll tell you if it’s not worth repairing
See our full price list.
About our accreditations · Every repair comes with a one-year guarantee.
