Norfolk · England

Non-Slip Bath Coating for Swanton Abbott homes

Non-slip bath coating across Swanton Abbott and nearby, done in a single visit in most cases and guaranteed for a year.

  • Worn-out textured areas
  • Safety for older or less mobile people
  • A bath or tray that is slippery when wet
Surface Doctor technician refinishing the outside of a roll-top bath

Need non-slip bath coating in Swanton Abbott?

Non-slip bath coating in Swanton Abbott without replacing anything

It’s popular with older people, families and holiday lets. It’s a clear, textured coating, so it shows only as a slightly matt area where you stand. We work on shower trays, acrylic baths and resurfaced baths, and common reasons people contact us are safety for older or less mobile people and bath mats that harbour mould or get forgotten.

All of our repairs are guaranteed for twelve months. If something goes wrong with the work, we come back. Clean with a soft brush and a mild cleaner. Avoid scourers on the coating.

Stained shower tray resurfaced to clean white, before and after
Where
Swanton Abbott (NR10)
Area hub
Norfolk
Guarantee
A year, on every repair
Quote
Free, fixed price from pictures
Call
0345 017 0787
Page updated
23 October 2026

Covering Swanton Abbott

Swanton Abbott is about 3 miles south-west of North Walsham, in Norfolk. Whether you are in the middle of Swanton Abbott or on the outskirts, the service is the same: fixed prices, tidy work and a one-year guarantee. Swanton Abbott is one of 797 towns and villages in Norfolk where we work.

Our technicians cover all of the NR10 postcode area and the streets around it. Whether you live on The Street, Youngman's Lane and Aylsham Road or anywhere nearby, we can come to you. Close by, we cover Westwick (1 mile north-east), Skeyton (1 mile west), Badersfield (2 miles south-west), Scottow (2 miles south-east) and Lamas (2 miles south-west). Further out, we also cover Norwich (10 miles south), Sprowston (9 miles south), Thorpe St Andrew (10 miles south), North Walsham (3 miles north-east), Sheringham (12 miles north-west) and Norwich Lanes (11 miles south).

What’s near Swanton Abbott

Typical jobs here are in homes near Church of St. Michael, Swanton Abbott Community Primary School and Felmingham Cutting. The closest station to Swanton Abbott is Worstead station, about 2 miles east. Well-known places in the area include Norfolk Motorcycle Museum (2.4 miles north-east) and Burgh next Aylsham (3.2 miles west).

Map of Swanton Abbott © OpenStreetMap contributors

Work for landlords and builders

Letting agents frequently send us pictures straight from the inventory. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.

We’re used to working with agents and managing companies. Just send photos, the address and how to get access.

Swanton Abbott: your questions answered

Will you leave a mess?

We protect the room with dust sheets and masking first, and we clean up when we’ve finished.

Can you repair something that is been repaired before?

Generally, yes. Let us know what was used before and we’ll plan for it.

What happens once I’ve sent pictures?

You will get a fixed quote back, plus dates. There is no obligation to book.

Is a repair better than a new one?

Usually, if the item is otherwise sound. A repair avoids removal and making good. If replacing would be better, we will say so.

What if the damage is worse than the pictures show?

The price is fixed for what the photos show. Anything extra is discussed before we begin.

I’m a tenant. Can you help?

Yes, but check with your landlord or agent first. Many landlords are happy for a repair to be arranged before the end of a tenancy.

Is it OK to have pets in the house?

Keep pets and children away from the work area on the day, mainly so nothing gets touched before it has cured.

Can you do more than one item on the same visit?

Of course, and it typically saves money. Just add the extra items to your photos and we will quote them together.

Repair or replace in Swanton Abbott?

The alternatives are replacing the bath or tray with a textured one, or a bath mat, which traps water and needs cleaning. A non-slip coating treats your existing bath or tray. Every job is a little different, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all play a part, and combining jobs on one visit brings the cost down.

What you get with us

  • Usually one visit, start to finish
  • Accredited with CHAS, Constructionline and SafeContractor
  • Same prices wherever you are
  • Dust sheets down, tidy finish

See our prices page.

When to call us in Swanton Abbott

Smooth surfaces are easy to clean, but wet, soapy surfaces are slippery. Textured areas on older baths wear smooth too.

If you can see any of these, send us a photo:

  • Bath mats that harbour mould or get forgotten
  • Resurfaced baths that are now too smooth
  • Worn-out textured areas
  • Safety for older or less mobile people

Before booking anyone

  • How to look after the finish
  • What protection goes down before work starts
  • If travel is included in the price
  • Is the price fixed, and does it include VAT?

Choosing a repair company

What non-slip bath coating costs

There’s no charge for travel to Swanton Abbott. The price comes down to:

  • The size and number of damaged areas
  • Doing more than one item at once
  • Access to the area
  • The material and finish

Set against the cost of replacement, repairing generally costs far less, because nothing has to be taken out, refitted or made good. The quote lists exactly what you are paying for.

How to get a fixed price

Good pictures mean an accurate price. Here’s what helps:

  • The material, if you know it
  • One sharp close-up of the damage
  • Daylight if possible, and no flash reflection
  • Something in shot to show the size

For a price in Swanton Abbott, the easiest route is pictures: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.

DIY repairs versus a professional job

For a hairline mark somewhere you’ll never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.

Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is normally cheaper.

How the visit works

On the day itself, there is little for you to do. Show us the job, point us to the room, and we’ll get on with it. The job generally runs to a few hours, tidy-up included.

  1. We start by degreasing the area where you stand.
  2. The area to be treated is masked out.
  3. We apply the clear textured coating.
  4. We remove the masking for a neat edge.
  5. The coating is left to cure before use, usually overnight.

Before we arrive

  • Have somewhere for us to park nearby if possible
  • Avoid using the area for a few hours before we arrive
  • Let us know about parking or access

Ask for a price

You do not need a survey visit. Nearly every job can be priced from photos: we need a close-up, a wider picture and your postcode, and we will come back to you with a fixed figure.

Get a free quote

Read more

Honest limits

A repair isn’t always the answer, and we would rather say so up front. Repairs won’t solve:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

If in doubt, send photos and we will say what we think.

What we work on

  • Resurfaced baths
  • Acrylic baths
  • Wet room floors (ask us)
  • Enamelled baths
  • Shower trays
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.