Luton · England
Non-slip bath & shower coating in Tin Town, Luton
Non-slip bath coating in and around Tin Town: a fixed quote from pictures, a tidy visit and a one-year guarantee.
- A bath or tray that is slippery when wet
- Bath mats that harbour mould or get forgotten
- Worn-out textured areas
Should you replace it?
The alternatives are replacing the bath or tray with a textured one, or relying on a mat, which traps water and needs cleaning. A non-slip coating treats your existing bath or tray. There are no surprise extras on the day. The price we quote from your photos is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
Why book with us
- Technicians who travel to you, UK-wide
- Dust sheets down, tidy finish
- Honest advice, even when it means no job
- Fixed prices from your pictures
See our full price list.
Non-slip bath coating in Tin Town without replacing anything
It suits homes with older or less mobile people, holiday lets and families. The coating is clear and textured, so it shows only as a slightly matt area where you stand. Typical jobs include bath mats that harbour mould or get forgotten and resurfaced baths that are now too smooth, across acrylic baths, shower trays and resurfaced baths.
You are covered after we leave: each job carries a one-year guarantee, and we explain what it covers before you book. Clean with a soft brush and a mild cleaner. Don’t use abrasive pads on the textured area.
- Location
- Tin Town (LU2)
- Area hub
- Luton
- Warranty
- A year, on every repair
- Quotes
- Free and fixed, from your pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Honest limits
Some problems need a builder, plumber or fitter rather than us:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
If in doubt, send photos and we will say what we think.
Materials we work on in Tin Town
- Resurfaced baths
- Wet room floors (ask us)
- Shower trays
- Enamelled baths
- Acrylic baths
The process
We agree an arrival time beforehand, so you’re not left guessing. On site, it takes a few hours. We leave the room clean and you’ll know when it can be used.
- We start by degreasing the area where you stand.
- Next we mask off the area.
- We apply the clear textured coating.
- We remove the masking for a neat edge.
- The coating is left to cure before use, normally overnight.
How to prepare
- Tell us about any previous repairs or coatings
- Point us to the nearest place to park
- Plan for the room to be out of bounds to pets and children
How to get a price
Most customers in Tin Town get their price from photos. Add a line about what happened and your postcode, and we will send back a fixed quote and some dates.
Related advice
Prices and what affects them
A fixed quote means you know the cost before booking. We take into account:
- How easy the damage is to reach
- What kind of damage it is
- Previous DIY repairs that have to come out
- Whether we combine several jobs
Rather than charging by the hour, we price the whole job up front. Damage, material and access decide it, and combining items on one visit brings it down.
Quotes from your photos
The better the photos, the more accurate the price. Here’s what helps:
- What it’s made of, if you know
- A clear, close picture of the problem area
- A coin or ruler next to the damage for scale
- Good light, ideally daylight, without flash glare
If you’re in Tin Town and want a price, the easiest route is photos: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
Do you need non-slip bath coating in Tin Town?
Baths and trays are made smooth so they’re easy to clean, yet with soap and water on them they become slippery. Textured areas on older baths wear smooth too.
These are the problems we’re asked about most:
- Safety for older or less mobile people
- A bath or tray that is slippery when wet
- Worn-out textured areas
- Resurfaced baths that are now too smooth
Comparing quotes
- Is the price fixed, and does it include VAT?
- The length of the guarantee and what it covers
- What happens if they find more damage
- Who will actually do the work
DIY kit or professional repair?
If you are set on a kit, follow its instructions closely, ensure the area is clean and completely dry, and don’t use it until it has fully cured. If it does not work out, we can still repair it properly.
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
Tin Town: your questions answered
Is a repair better than a new one?
Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. We’ll be honest if it’s not worth it.
Can pets and children be at home?
On the day, the room should be kept clear of pets and children, so the repair is not disturbed while it cures.
Can landlords book you?
Yes, frequently. We quote for multiple addresses and fit around tenancy changeovers.
Can tenants book a repair?
Yes. Check with your landlord; we can send the quote to them too.
It’s been repaired before. Can you still fix it?
Yes, we frequently do. It can add a little time, which we include in the quote.
What areas do you cover?
We work UK-wide, so Tin Town is covered. Our prices are the same everywhere.
Do you come to Tin Town?
Yes, we do. We send a technician to Tin Town for every job, with no extra charge for travel.
Will the price change on the day?
If we find something the photos didn’t show, we explain it first. The price only changes if you agree.
Landlords, agents and businesses in Tin Town
We work for landlords, letting agents and housing providers in Tin Town as well as homeowners. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
Hotels, guest houses and holiday lets need rooms back in use quickly, so we keep visits short and tidy. We can work around your bookings.
Also near Tin Town
More services for Tin Town
Where we work around Tin Town
Tin Town is about 2 miles east of Luton, in Luton. Clients in Tin Town get the same service as everywhere else we cover: a fixed quote from pictures, and a technician at your door on the day. Tin Town is one of 53 places in Luton we cover. You can also see our page for London, about 30 miles away.
We work across LU2. Whether you live on Brays Road, Talbot Road and Elmore Road or anywhere nearby, a technician can come to you. Neighbouring places we cover include Ramridge End (1 mile north-east), Crawley Green (1 mile east), Stopsley (1 mile north), Vauxhall Park (1 mile south-east) and Cockernhoe (1 mile east). We also work in nearby towns such as Limbury (3 miles north-west), Marsh Farm (3 miles north-west), Lewsey Farm (5 miles west), Lewsey Park (4 miles west), Lewsey (4 miles west) and Tophill (4 miles west).
Near you in Tin Town
Typical jobs here are in homes near St Francis, Wardown Park and Ramridge Primary School and the streets around them. Nearby too are Queen Elizabeth School (less than half a mile east) and The Ashcroft Arms (less than half a mile east). The closest station to Tin Town is Luton station, about 1.1 miles south-west. A little further out are Bedfordshire And Hertfordshire Regiment Museum (1.1 miles west) and Luton Castle (1.6 miles south-west). For a walk, there is Warden Hill and Pegsdon Hills.
About our accreditations · Every repair comes with a one-year guarantee.
