Argyll and Bute · Scotland
Non-Slip Bath Coating for Tobermory homes
Non-slip bath coating in and around Tobermory: a fixed quote from photos, a tidy visit and a one-year guarantee.
- Safety for older or less mobile people
- A bath or tray that is slippery when wet
- Worn-out textured areas
How we handle non-slip bath coating in Tobermory
The coating is clear and textured, so it shows only as a slightly matt area where you stand. It’s popular with older people, families and holiday lets. We regularly repair resurfaced baths, wet room floors (ask us) and acrylic baths, and common reasons people get in touch are safety for older or less mobile people and bath mats that harbour mould or get forgotten.
We guarantee the work for a year. If there is a problem with the repair within the year, we return and sort it. A soft brush and mild cleaner keep it clean. Don’t use abrasive pads on the textured area.
- Area
- Tobermory (PA75)
- County
- Argyll and Bute
- Guarantee
- One year on every repair
- Quotes
- Fixed and free, based on pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Honest limits
We’d rather lose a job than do one that will not last, so these are the limits:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
Send us pictures and we’ll tell you honestly before booking.
Surfaces we repair
- Acrylic baths
- Wet room floors (ask us)
- Resurfaced baths
- Shower trays
- Enamelled baths
Also in Tobermory
Our work in Tobermory
Tobermory is in Argyll and Bute. Clients in Tobermory get the same service as everywhere else we cover: a fixed quote from pictures, then a visit to do the work. Our technicians cover all 118 towns and villages in Argyll and Bute, from the larger towns to small villages.
Here we cover the PA75 postcode area. Local streets include Main Street, Breadalbane Street and Albert Street. With the A848 and B882 close by, Tobermory is simple for us to get to. We also travel to Baliscate (1 mile south), Kilchoan (5 miles north), Ballygown (9 miles south-west), Salen (9 miles south-east) and Lochaline (13 miles south-east). Tobermory is one of the larger places we cover in Argyll and Bute. Remote and island addresses take a little more planning, so call us to arrange it.
Local landmarks in Tobermory
Locally, our jobs take us to homes close to Parish Church, Aros Park and Tobermory High School and the streets around them. Further afield, we also cover the area around Mull Museum (within half a mile east) and St Columba's Roman Catholic Church and Drimnin Castle (2.8 miles east). Green spaces nearby include 'S Àirde Beinn and Loch Peallach.
Work for landlords and builders
Landlords, letting agents and housing providers in Tobermory use us as well as householders. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
For developers and builders, we fix damage before handover, so there is no need to replace a damaged item at the last minute. Several plots can be done in one visit to keep costs down.
Repair or replace: which is better?
The alternatives are a new textured bath or tray, or relying on a mat that needs lifting and cleaning. A non-slip coating adds grip to the bath you have. No two jobs are quite the same, so we price each one individually. What’s damaged, how badly and how easy it is to reach all make a difference, and doing several things on one visit costs less than separate visits.
What you get with us
- We leave the room as we found it
- One visit for most repairs
- One-year guarantee on every repair
- Fixed prices from your photos
Take a look at our full price list.
Questions from Tobermory
Can tenants book a repair?
We can work for tenants, landlords or agents. Just make sure the landlord agrees.
Is it safe with children and pets around?
We ask you to keep children and pets out of the room while we work and until it has cured. Everywhere else in the home is fine.
When can you do it?
Your quote comes with available dates. Tell us if you need it done quickly.
How much does non-slip bath coating cost in Tobermory?
Every job gets a fixed quote from your pictures. Send a close-up of the damage and a wider photo and your postcode.
What areas do you cover?
The whole UK, including all of Argyll and Bute. Send your postcode with your pictures and we will confirm dates.
Is there any odour?
There can be some smell while we work, so we ventilate the room. It fades as everything cures.
Will you leave a mess?
We protect the room with dust sheets and masking first, and tidy up before we leave.
Can I add another job to the visit?
Yes. Combining jobs on one visit brings the cost down. Include pictures of each item.
What affects the price in Tobermory
We give every job a fixed price from photos. These are the things that affect it:
- Whether it’s a chip, crack, burn or wear
- How easy the damage is to reach
- Unusual colours or finishes
- How many items we do on one visit
Rather than charging by the hour, we fix the price before we start. It depends on the damage, the material and access.
Getting a price from photos
It only takes a minute to photograph the damage, and it saves a visit. Please include:
- A wider photo showing the entire bath or shower tray
- Whether it’s been repaired or coated before
- A close-up of the damage, in focus
- A coin beside the damage so we can judge size
To get a price, send a couple of photos using our quote form or ring us. We will tell you honestly whether it can be repaired.
Should I try a DIY kit first?
It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is normally the cheaper route.
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
How the visit works
A typical visit goes like this: we arrive on time, protect everything around the work area, carry out the work and clear up. Allow a few hours. Before leaving, we tell you how long to leave it and how to look after it.
- First the standing area is cleaned and degreased.
- Next we mask off the area.
- We apply the clear textured coating.
- We remove the masking for a neat edge.
- The coating is left to cure before use, generally overnight.
How to prepare
- Keep a parking space free if you can
- Avoid using the area for a few hours before we arrive
- Make sure the room can be ventilated
Ask for a price
No survey visit is needed: we price from pictures. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you will get a fixed figure back.
Read more
Common problems we fix in Tobermory
Baths and trays are made smooth so they’re easy to clean, yet wet, soapy surfaces are slippery. Textured areas on older baths wear smooth too.
The most common problems we’re called about are:
- Safety for older or less mobile people
- Bath mats that harbour mould or get forgotten
- A bath or tray that is slippery when wet
- Resurfaced baths that are now too smooth
Before booking anyone
- Whether a trained technician does the job
- A fixed quote, and whether VAT is included
- What the guarantee covers, and for how long
- Whether the colour is mixed to match
About our accreditations · Every repair comes with a one-year guarantee.
