Merthyr Tydfil · Wales

Non-slip bath & shower coating in Upper Abercanaid, Merthyr Tydfil

Non-slip bath coating for Upper Abercanaid, without a refit. Get a fixed price from your photos, then we come to you.

  • A bath or tray that is slippery when wet
  • Worn-out textured areas
  • Resurfaced baths that are now too smooth
Surface Doctor technician refinishing the outside of a roll-top bath

Book non-slip bath coating in Upper Abercanaid

What affects the price in Upper Abercanaid

You will not pay by the hour. The price depends on:

  • Whether it’s a chip, crack, burn or wear
  • Previous DIY repairs that have to come out
  • Whether we combine several jobs
  • Access to the area

The price reflects the work involved, not where you live. The full price is agreed before you book, with nothing added on the day.

Getting a price from photos

The better the photos, the more accurate the price. Here’s what we find most useful:

  • A photo taken from further back
  • What it’s made of, if you know
  • Good light, ideally daylight, without flash glare
  • A clear, close picture of the problem area

Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job.

Non-slip bath coating at your home in Upper Abercanaid

The coating is clear and textured, so the bath looks much the same. It’s popular with homes with older or less mobile people, holiday lets and families. Typical jobs include resurfaced baths that are now too smooth and bath mats that harbour mould or get forgotten, in wet room floors (ask us), acrylic baths and enamelled baths.

You’re covered for a year from the day of the repair. If anything isn’t right, ring us and we will sort it. Clean with a soft brush and a mild cleaner. Do not use abrasive pads on the textured area.

Location
Upper Abercanaid (CF48)
County
Merthyr Tydfil
Warranty
A year, on every repair
Quote
Fixed and free, based on pictures
Call
0345 017 0787
Last updated
23 October 2026
Discoloured square shower tray restored with a new white finish

Landlord and trade work in Upper Abercanaid

Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.

Hotels, guest houses and holiday lets can’t afford rooms out of action for long, so we keep visits short and tidy. We can work around your bookings.

How the visit works

When we visit, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. The job generally takes a morning or an afternoon. We tidy up before we leave and let you know when you can use it again.

  1. First the standing area is cleaned and degreased.
  2. We mask out the area to be treated.
  3. We put on the clear non-slip coating.
  4. We remove the masking for a neat edge.
  5. The coating is left to cure before use, normally overnight.

Getting ready for the visit

  • Mention any earlier repairs or resurfacing
  • Plan for the room to be out of bounds to pets and children
  • Let us know about parking or access

Getting a price

Email us photos of the damage and a wider shot of the entire item, with your CF48 postcode, and we will reply with a fixed price.

Get a free quote

Read more

Do you need non-slip bath coating in Upper Abercanaid?

Smooth surfaces are easy to clean, yet with soap and water on them they become slippery. The textured patch on an older bath also wears down over time.

Get in touch if you’ve noticed any of these:

  • Bath mats that harbour mould or get forgotten
  • Worn-out textured areas
  • Safety for older or less mobile people
  • A bath or tray that is slippery when wet

Comparing quotes

  • How the colour is matched
  • Who will actually do the work
  • How long the guarantee is and what it covers
  • If travel is included in the price

How to compare quotes

Should I try a DIY kit first?

It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.

A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.

What we cannot put right

A few problems are outside what a surface repair can do:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

Send us pictures and we’ll tell you honestly.

What we work on

  • Shower trays
  • Resurfaced baths
  • Wet room floors (ask us)
  • Enamelled baths
  • Acrylic baths

Common questions in Upper Abercanaid

Are you accredited?

We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.

How do I get a price for non-slip bath coating in Upper Abercanaid?

Because every job differs, we price from pictures. You know the full cost before anything is booked.

Will you leave a mess?

Dust sheets and masking go down before we start, and tidy up before we leave.

What happens next?

We review the photos and send a fixed quote.

Will a non-slip coating change how my bath looks?

Only slightly: it shows as a matt area where you stand.

Can pets and children be at home?

Just keep them out of the work area. We will let you know when it’s safe to use again.

Do I have to be there?

Yes. We need access to the room while we work, at a time we agree with you.

Do the materials smell?

There may be a mild smell during the work, which fades afterwards.

Repair or replace: which is better?

Instead, you could go for replacing the bath or tray with a textured one, or relying on a mat that needs lifting and cleaning. A coating adds grip to the bath you have. Our prices are the same across the UK, so there’s no premium for Upper Abercanaid. What changes the price is the job itself: how much damage, what it’s made of and how many items.

What you get with us

  • We’ll tell you if it’s not worth repairing
  • Technicians who travel to you, UK-wide
  • Normally one visit, start to finish
  • Fixed prices from your photos

See our prices page.

Covering Upper Abercanaid

Upper Abercanaid is about 2 miles south of Merthyr Tydfil, in Merthyr Tydfil. Our work suits any type of property, old or new, large or small, plus businesses and rented homes. Upper Abercanaid is one of 52 places in Merthyr Tydfil where we work.

We cover every part of CF48 and the streets around it. Other places close to Upper Abercanaid include Abercanaid (1 mile south-east), Rhyd-y-car (1 mile north), Ysgubor Newydd (1 mile north), Cae-draw (1 mile north) and Pentrebach (1 mile south-east). Further out, we also cover Galon Uchaf (3 miles north), Treharris (5 miles south-east), Pen-y-wern (3 miles north), Nelson (7 miles south-east), Pant (3 miles north) and Pentwynberth-lwyd (6 miles south-east).

Local landmarks in Upper Abercanaid

Typical jobs here are in homes near Llwyn-Yr-Eos Inn, St Tydfil's Church and Abercanaid Community School. Upper Abercanaid’s nearest station is Pentre-Bach station, roughly 0.6 miles south-east. Further afield, we also cover the area around St Tydfil's Hospital (1.3 miles north) and Ynysfach Engine House (1.2 miles north). The countryside around Upper Abercanaid includes Mynydd Gethin and Pwll Waun Cynon.

Map of Upper Abercanaid © OpenStreetMap contributors
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.