Oxfordshire · England
Non-Slip Bath Coating in Wallingford
Local non-slip bath coating for Wallingford: photo quotes, tidy work and a year’s guarantee.
- Bath mats that harbour mould or get forgotten
- Safety for older or less mobile people
- A bath or tray that is slippery when wet

Wallingford questions
Do I have to be there?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
What happens after I send pictures?
We look at the photos and reply with a fixed price and some dates. If we need another angle, we will ask.
Will it make a mess?
We protect the room with dust sheets and masking first, and we clean up when we’ve finished.
Will I see the coating?
Only slightly: the treated area looks slightly matt.
How much does non-slip bath coating cost in Wallingford?
Because every job differs, we price from photos. You’ll get a fixed figure before you book.
Are you accredited?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
What information do you need?
Photos of the damage, a photo of the entire bath or shower tray and your postcode. Then we will agree a date.
Do you do work for letting agents?
Yes, often. We can quote for several properties together and work between tenancies.
How we handle non-slip bath coating in Wallingford
It suits older people, families and holiday lets. The coating is clear and textured, so it shows only as a slightly matt area where you stand. Common call-outs are for worn-out textured areas and safety for older or less mobile people, on resurfaced baths, enamelled baths and wet room floors (ask us).
The work is covered for a year after we finish. If anything isn’t right, ring us and we will sort it. A soft brush and mild cleaner keep it clean. Do not use abrasive pads on the textured area.

- Location
- Wallingford (OX10)
- Region
- Oxfordshire
- Guarantee
- One year on every repair
- Quotes
- Free, fixed price from pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
The process
A typical visit goes like this: we arrive on time, protect everything around the work area, do the job and clear up. Plan for a few hours. Before we go, we will explain how long to leave it and how to look after it.
- We clean and degrease the standing area.
- The area to be treated is masked out.
- The clear textured coating is applied.
- We lift the masking for a clean edge.
- The coating is left to cure before use, generally overnight.
How to prepare
- Tell us about parking, stairs or access
- Mention if the room is upstairs or in a flat
- Keep a parking space free if you can
Get a quote
Pricing is simple: snap the damage close up and then the whole item, send them over with your postcode, and you’ll get a fixed quote back. There is no charge for the quote and you are under no obligation.
Related advice
Why repair rather than replace?
Instead, you could go for a new textured bath or tray, or relying on a mat, which traps water and needs cleaning. A coating adds grip to the bath you have. Every job is a little different, so we price each one individually. The size and type of damage, the material and access all make a difference, and combining jobs on one visit brings the cost down.
Why choose Surface Doctor in Wallingford
- One visit for most repairs
- Every repair guaranteed for a year
- Straight answers about what a repair can do
- CHAS, Constructionline and SafeContractor accredited
See our pricing.
Also near Wallingford
Other services in Wallingford
How we price non-slip bath coating
A fixed quote means you know the cost before booking. We look at:
- What kind of damage it is
- What the surface is made of
- Access to the area
- The size and number of damaged areas
A repair usually costs much less than people expect, especially compared with replacing and refitting. Photos let us give you the exact figure.
Getting a price from pictures
Phone pictures are fine, there is no need for anything special. Ensure they show:
- Any earlier repairs or coatings
- Where you are, by postcode
- A close-up of the damage, in focus
- Good light, ideally daylight, without flash glare
For a price in Wallingford, the easiest route is pictures: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
Landlord and trade work in Wallingford
Housing associations and facilities teams use us for planned and reactive repairs in Oxfordshire and across the UK. A repair avoids taking out and refitting, which is easier on the people living there.
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
What we can’t put right
To be straight with you, some problems need a different fix:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
If in doubt, send photos and we’ll say what we think before booking.
Materials we repair
- Shower trays
- Wet room floors (ask us)
- Resurfaced baths
- Enamelled baths
- Acrylic baths
DIY repairs versus a professional job
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
If you are set on a kit, follow its instructions closely, ensure the area is clean and completely dry, and give it the full curing time. If it doesn’t work out, we can still repair it properly.
Wallingford and nearby
Wallingford is about 5 miles east of Didcot, in Oxfordshire. Jobs in Wallingford are booked in like any other job: a fixed quote from photos, then a visit to do the work. We cover 443 places in Oxfordshire. Our jobs stretch from Wallingford to London (45 miles away).
Here we cover the OX10 postcode area. Whether you live on Station Road, High Street and Hawthorn Close or anywhere nearby, we can come to you. With the A4130 close by, Wallingford is simple for us to get to. Neighbouring places we cover include Preston Crowmarsh (1 mile north-east), Mackney (1 mile west), Brightwell-cum-Sotwell (2 miles north-west), Benson (2 miles north-east) and Shillingford (2 miles north). We also work in nearby towns such as Oxford (11 miles north-west), Didcot (5 miles west), Abingdon-on-Thames (8 miles north-west), Thame (12 miles north-east), Wantage (13 miles west) and Henley-on-Thames (11 miles south-east).
Landmarks near Wallingford
Typical jobs here are in homes near Wallingford School, Fir Tree Junior School and Wallingford School, among other places. Nearby too are Kinecroft (less than half a mile south-east), St Mary-le-More (less than half a mile east) and The Cross Keys Public House (under half a mile east). The nearest railway station is Cholsey station, roughly 2.4 miles south-west of the centre. Other landmarks nearby include Wallingford Castle (less than half a mile east). For a walk, there is Wittenham Clumps and Cholsey Marsh.
Do you need non-slip bath coating in Wallingford?
Smooth surfaces are easy to clean, but with soap and water on them they become slippery. The textured patch on an older bath also wears down over time.
Keep an eye out for any of the following:
- Bath mats that harbour mould or get forgotten
- Resurfaced baths that are now too smooth
- A bath or tray that is slippery when wet
- Safety for older or less mobile people
What your quote should include
- Is the price fixed, and does it include VAT?
- How soon you can use it again
- What prep work is covered
- How your room will be protected
About our accreditations · Every repair comes with a one-year guarantee.

