Fife · Scotland
Non-Slip Bath Coating in Wellwood
Clear non-slip coatings for baths and shower trays for homes and businesses in Wellwood and across Fife. Send photos for a free, fixed quote.
- Bath mats that harbour mould or get forgotten
- Resurfaced baths that are now too smooth
- A bath or tray that is slippery when wet
Your questions about non-slip bath coating in Wellwood
Will I see the coating?
Only slightly: it shows as a matt area where you stand.
Is it OK to have pets in the house?
Just keep them out of the work area. We will tell you when the room can be used again.
Will it make a mess?
We protect the room with dust sheets and masking first, and we clean up when we have finished.
I rent my home. Can I book you?
Of course. Check with your landlord; we can send the quote to them too.
What happens if you find more damage?
If we find something the pictures didn’t show, we explain it first. You decide whether to go ahead.
Can you redo someone else’s repair?
Usually, yes. The old repair comes out first, so let us know about it.
What happens after I send pictures?
You will get a fixed quote back, plus dates. You’re under no obligation.
How much does non-slip bath coating cost in Wellwood?
Every job gets a fixed price from your pictures. Send a close-up and a photo of the entire item and your postcode.
Non-slip bath coating in Wellwood, done in place
It suits older people, families and holiday lets. The coating is clear and textured, so it shows only as a slightly matt area where you stand. We regularly repair wet room floors (ask us), acrylic baths and resurfaced baths, and the jobs we see most are bath mats that harbour mould or get forgotten and worn-out textured areas.
Big or small, you get the same one-year guarantee in Wellwood and across Fife. Clean with a soft brush and a mild cleaner. Don’t use abrasive pads on the textured area.
- Area
- Wellwood (KY12)
- Area hub
- Fife
- Warranty
- One year on every repair
- Price
- Free, fixed quote from pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
When we would advise against a repair
Some problems need a builder, plumber or fitter rather than us:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
Not sure? Send pictures and we’ll give you a straight answer before booking.
Surfaces we repair
- Resurfaced baths
- Shower trays
- Acrylic baths
- Wet room floors (ask us)
- Enamelled baths
Other services in Wellwood
Wellwood and nearby
Wellwood is about 2 miles north-west of Dunfermline, in Fife. Our repair technicians come to customers in Wellwood and nearby villages, so there’s no workshop to go to. Our technicians cover all 133 towns and villages across Fife, from the larger towns to small villages. We work right across the region, from Wellwood to Edinburgh (14 miles away).
All of KY12 is within our area, from the main roads to the quietest streets. Local streets include Pit Lane, Leadburn Avenue and Venturefair Avenue. Nearby, we also work in Townhill (1 mile east), Dunfermline (2 miles south-east), Abbeyview (2 miles south-east), Crossford (2 miles south-west) and Kingseat (2 miles east). Within a short drive, we also cover Kirkcaldy (12 miles east), Glenrothes (14 miles north-east), Cowdenbeath (5 miles east), Dysart (13 miles east), Dalgety Bay (5 miles south-east) and Rosyth (4 miles south-east).
Near you in Wellwood
In Wellwood, that means homes near The Guildhall & Linen Exchange pub, North Church and McLean Primary School and the streets around them. Nearby too are Pittencrieff Park (1.1 miles south) and Queen Anne High School Dunfermline (within half a mile south). The nearest railway station is Dunfermline City station, roughly 1.2 miles south. Well-known places in the area include Abbot House (1 mile south) and Kingsgate Centre (0.9 miles south). Not far away are Black Loch.
Repair or replace in Wellwood?
Instead, you could go for replacing the bath or tray with a textured one, or a bath mat, which traps water and needs cleaning. A non-slip coating adds grip to the bath you have. There are no surprise extras on the day. The price we quote from your photos is the price you pay, and if the damage turns out to be different, we discuss it before starting.
Why book with us
- Dust sheets down, tidy finish
- Nothing taken out or refitted
- A fixed quote before booking
- Same prices wherever you are
See our pricing.
Landlord and trade work in Wellwood
We regularly price jobs from inventory or check-out photos. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover so nothing needs replacing. We’re CHAS, Constructionline and SafeContractor accredited.
DIY repairs versus a professional job
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
What we do, step by step
We work cleanly and quietly, so you can stay at home while we are there. We protect the area first, then the job itself takes a few hours. Before we leave, we explain how soon it can be used and how to care for it.
- We clean and degrease the standing area.
- The area to be treated is masked out.
- We put on the clear non-slip coating.
- We lift the masking for a clean edge.
- We leave it to cure, generally overnight.
How to prepare
- Plan for the room to be out of bounds to pets and children
- Let the surface dry out before the visit
- Tell us if there are stairs or a lift
Getting a price
Ring 0345 017 0787, or send us pictures through the quote form. With one close-up and one wider picture, we can price the job without visiting.
Read more
Do you need non-slip bath coating in Wellwood?
Smooth surfaces are easy to clean, but with soap and water on them they become slippery. Textured areas on older baths wear smooth too.
Typical reasons for a call-out include:
- Resurfaced baths that are now too smooth
- Bath mats that harbour mould or get forgotten
- Safety for older or less mobile people
- A bath or tray that is slippery when wet
What your quote should include
- What prep work is covered
- Whether a trained technician does the job
- A fixed quote, and whether VAT is included
- What the guarantee covers, and for how long
Prices and what affects them
We price every job individually, from your photos. What matters most is:
- Previous DIY repairs that have to come out
- The colour and finish to match
- The size and number of damaged areas
- Whether we combine several jobs
Compared with replacing, a repair is usually a fraction of the price, because there is no removal, plumbing or making good. The quote lists exactly what you are paying for.
Getting a price from photos
Good pictures mean an accurate price. Here’s what helps:
- Where you are, by postcode
- Any earlier repairs or coatings
- A photo taken from further back
- The material, if you know it
The quickest way to a price is to send a couple of pictures through our quote form or ring us. We will say straight away whether it can be repaired.
About our accreditations · Every repair comes with a one-year guarantee.
