Bath and North East Somerset · England

Non-Slip Bath Coating for West Harptree homes

Clear non-slip coatings for baths and shower trays at your home in West Harptree, with a one-year guarantee on every repair.

  • Resurfaced baths that are now too smooth
  • Worn-out textured areas
  • A bath or tray that is slippery when wet
Surface Doctor technician refinishing the outside of a roll-top bath

Non-slip bath coating near West Harptree

Where we work around West Harptree

West Harptree is about 7 miles west of Midsomer Norton, in Bath and North East Somerset. We work in every kind of home, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. West Harptree is one of 136 towns and villages in Bath and North East Somerset we cover.

Our repair technicians cover all of the BS40 postcode area. You’ll find streets such as The Street, Ridge Lane and Ridge Crescent, and we cover them all. Neighbouring places we cover include Ridge (1 mile south-west), Compton Martin (1 mile west), South Widcombe (1 mile east), North Widcombe (1 mile north-east) and Ubley Sideling (2 miles west). We also work in nearby towns such as Bath (13 miles north-east), Keynsham (9 miles north-east), Bathwick (13 miles north-east), Walcot (13 miles north-east), Westmoreland (12 miles north-east) and Kingsmead (12 miles north-east).

What’s near West Harptree

Our clients here include homes close to The Waldegrave Arms, East Harptree Church of England Primary School and Church of St Mary. A little further out are Oval enclosure (2.8 miles north-east). The countryside around West Harptree includes Knowle Hill and Priddy Mineries.

Map of West Harptree © OpenStreetMap contributors

About our non-slip bath coating in West Harptree

It suits homes with older or less mobile people, holiday lets and families. The coating is clear and textured, so the bath looks much the same. We work on resurfaced baths, enamelled baths and wet room floors (ask us), and the jobs we see most are resurfaced baths that are now too smooth and a bath or tray that is slippery when wet.

You are covered after we leave: each job carries a one-year guarantee, and we explain what it covers before you book. A soft brush and mild cleaner keep it clean. Avoid scourers on the coating.

Location
West Harptree (BS40)
Region
Bath and North East Somerset
Warranty
A year, on every repair
Price
Free and fixed, from your photos
Call
0345 017 0787
Updated
23 October 2026
Discoloured square shower tray restored with a new white finish

When a repair is not the answer

A few problems are outside what a surface repair can do:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

Not sure? Send pictures and we will give you a straight answer.

Materials we work on in West Harptree

  • Shower trays
  • Enamelled baths
  • Resurfaced baths
  • Acrylic baths
  • Wet room floors (ask us)

Should you replace it?

The alternatives are replacing the bath or tray with a textured one, or relying on a mat, which traps water and needs cleaning. A coating treats your existing bath or tray. A repair is priced on what needs doing, not your postcode. You will see the full price before you book.

What you get with us

  • No extra charge for your area
  • We leave the room as we found it
  • Everything repaired in place
  • Free fixed quotes from pictures

Take a look at our pricing.

When to call us in West Harptree

Smooth surfaces are easy to clean, but wet, soapy surfaces are slippery. The textured patch on an older bath also wears down over time.

Clients typically contact us about:

  • Resurfaced baths that are now too smooth
  • Bath mats that harbour mould or get forgotten
  • Safety for older or less mobile people
  • Worn-out textured areas

Before you book anyone

  • Whether a trained technician does the job
  • Whether the price is fixed and includes VAT
  • What aftercare is recommended
  • How the colour is matched

10 questions to ask before booking

DIY repairs versus a professional job

A DIY attempt is not a disaster. We remove the old filler and start again, so it does not stop a professional repair. It does add a little time, so tell us about it when you send photos.

It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is typically the cheaper route.

Landlord and trade work in West Harptree

We’re used to working with agents and managing companies. Just send pictures, the address and how to get access and we’ll handle the rest.

Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.

Prices and what affects them

There is no charge for travel to West Harptree. The price depends on:

  • The material
  • Unusual colours or finishes
  • Access to the area
  • Previous DIY repairs that have to come out

Rather than charging by the hour, we price the whole job up front. Damage, material and access decide it, and combining items on one visit brings it down.

How to get a fixed price

Most quotes are done from pictures alone. To make it quick:

  • One picture of the whole bath or shower tray
  • Natural light rather than flash
  • A close-up of the damage, in focus
  • Any details about the material

Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can give you a fixed price the same day in most cases.

Your questions about non-slip bath coating in West Harptree

Will a non-slip coating change how my bath looks?

Very little: the treated area looks slightly matt.

What if the damage is worse than the photos show?

We stop, show you and agree any change before carrying on. You will not be charged for anything you haven’t agreed.

Can pets and children be at home?

Just keep them out of the work area. We’ll let you know when it’s safe to use again.

I rent my home. Can I book you?

We can work for tenants, landlords or agents. Just ensure the landlord agrees.

Does someone need to be in?

Someone needs to let us in and show us the job. You do not need to watch us work.

Do the materials smell?

A little, depending on the job. Ventilation keeps it to a minimum.

Can you repair something that’s been repaired before?

Yes, we often do. It can add a little time, which we include in the quote.

How do I clean it?

Yes. Use a soft brush and a mild cleaner.

How it works

On the day, we arrive at the time we have agreed, cover the area with dust sheets and masking, and set to work. Expect it to take a few hours. We clean up when we’re done and tell you when it’s ready to use.

  1. First the standing area is cleaned and degreased.
  2. We mask out the area to be treated.
  3. We put on the clear non-slip coating.
  4. The masking comes off to leave a neat edge.
  5. The coating is left to cure before use, normally overnight.

Preparing for the visit

  • Plan for the room to be out of bounds to pets and children
  • Keep a parking space free if you can
  • Let us know if it has been repaired before

Getting a price

No survey visit is needed: we price from photos. Use the quote form, or ring 0345 017 0787 to talk it through, and you’ll get a fixed figure back.

Get a free quote

Related advice

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.