North Ayrshire · Scotland

Non-Slip Bath Coating in West Kilbride

Clear non-slip coatings for baths and shower trays for homes and businesses in West Kilbride and across North Ayrshire. Send pictures for a fixed quote.

  • A bath or tray that is slippery when wet
  • Worn-out textured areas
  • Resurfaced baths that are now too smooth
Surface Doctor technician refinishing the outside of a roll-top bath

Non-slip bath coating near West Kilbride

Non-slip bath coating in West Kilbride, done in place

The coating is clear and textured, so the bath looks much the same. It suits homes with older or less mobile people, holiday lets and families. We regularly repair enamelled baths, resurfaced baths and wet room floors (ask us), and people most frequently call us about bath mats that harbour mould or get forgotten and a bath or tray that is slippery when wet.

Homes around West Kilbride range from cottages to newer houses. Older ones may still have cast iron or steel baths, which are well worth keeping, and newer ones normally have acrylic.

A one-year guarantee comes as standard, so you’re covered after the visit. Clean with a soft brush and a mild cleaner. Do not use abrasive pads on the textured area.

Location
West Kilbride (KA23)
County
North Ayrshire
Cover
One year on every repair
Quotes
Fixed, from your photos
Call
0345 017 0787
Page updated
23 October 2026
Discoloured square shower tray restored with a new white finish

What a repair cannot fix

Before you book, it’s worth knowing the limits too:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

Not sure? Send photos and we’ll give you a straight answer before booking.

What we work on

  • Enamelled baths
  • Shower trays
  • Wet room floors (ask us)
  • Resurfaced baths
  • Acrylic baths

Should I try a DIY kit first?

The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.

You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.

FAQs for West Kilbride

I let a flat near West Kilbride station. Can you help between tenants?

Yes, we frequently work between tenancies, and several addresses can be quoted together.

Can you restore the original baths and shower trays in an older house in West Kilbride?

In most cases: period pieces can be hard to match if replaced. We’ll give you an honest view from pictures.

What do you need from me?

A close-up, a wider photo and your postcode. After that, we just agree a date.

Is a non-slip bath easy to clean?

Yes. Use a soft brush and a mild cleaner.

Will a non-slip coating change how my bath looks?

Only slightly: it shows as a matt area where you stand.

How much does non-slip bath coating cost in West Kilbride?

We give a fixed price based on photos of the damage. Send a close-up of the damage and a wider photo and your postcode.

Can you repair something that’s been repaired before?

Yes, regularly. Removing the old work can add time, and that is in the quote.

Can I get a quote without a visit?

Yes, almost always. Clear pictures let us give you a fixed price without visiting.

What affects the price in West Kilbride

We charge the same across the UK, including West Kilbride. The price reflects:

  • Where the damage is and how we get to it
  • Any earlier repairs that need removing first
  • Whether we combine several jobs
  • What kind of damage it is

No two jobs are quite the same, so each one is priced on its own. The size and type of damage, the material and access all make a difference, and combining jobs on one visit brings the cost down.

Quotes from your photos

Almost every job we do is priced from pictures. This is what to send:

  • One picture of the whole bath or shower tray
  • A close-up of the damage, in focus
  • Where you are, by postcode
  • Good light, ideally daylight, without flash glare

Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath or shower tray, add your postcode and send them to us. What comes back is a fixed price, not a guess.

What we’re called out for in West Kilbride

Smooth surfaces are easy to clean, but with soap and water on them they become slippery. The textured patch on an older bath also wears down over time.

The things customers usually mention when they call are:

  • Worn-out textured areas
  • Safety for older or less mobile people
  • Bath mats that harbour mould or get forgotten
  • Resurfaced baths that are now too smooth

In the older streets of West Kilbride, around landmarks like Barony Parish Church, an original cast iron or steel bath is worth keeping, and non-slip bath coating gives it years more use.

What to look for in a quote

  • A fixed quote, and whether VAT is included
  • How long the guarantee is and what it covers
  • How the colour is matched
  • What protection goes down before work starts

Our hiring checklist

Landlord and trade work in West Kilbride

We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover so nothing needs replacing. We’re CHAS, Constructionline and SafeContractor accredited.

We work for landlords, letting agents and housing providers in West Kilbride as well as householders. Repairing between tenancies keeps void periods short, and it costs much less than replacing.

Repairing versus replacing in West Kilbride

The alternatives are replacing the bath or tray with a textured one, or a bath mat, which traps water and needs cleaning. A non-slip coating adds grip to the bath you have. In a smaller place like West Kilbride, getting trades out for a full replacement can take time to arrange. A repair needs just one visit.

We charge the same wherever you are, with no extra for West Kilbride. The job itself decides the price: the material, the amount of damage and how many items.

Why West Kilbride clients choose us

  • Dust sheets down, tidy finish
  • Most jobs done in one visit
  • Nothing taken out or refitted
  • Fixed prices from your pictures

Take a look at our Prices page.

Baths in West Kilbride homes

If you let a flat or house near West Kilbride station (in West Kilbride itself), we repair baths and shower trays between tenancies so it’s ready to let again quickly.

West Kilbride is about 4 miles north-west of Saltcoats, in North Ayrshire. Our work suits any type of property, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. We work in 53 places across North Ayrshire. Our jobs stretch from West Kilbride to Glasgow (25 miles away).

Postcode districts we cover here for non-slip bath coating: KA23. If your bath or shower tray is in a house or flat on Main Street, Alton Street and Headrigg Road or anywhere close by, we can come to you. We also cover the places around West Kilbride: Seamill (1 mile south-west), Ardrossan (3 miles south-east), Fairlie (4 miles north), Saltcoats (4 miles south-east) and Millport (5 miles north-west). Larger places within reach include Irvine (9 miles south-east), Kilwinning (7 miles south-east), Largs (7 miles north), Stevenston (5 miles south-east), Kilbirnie (8 miles north-east) and Girdle Toll (9 miles south-east). West Kilbride is among the bigger towns we cover in North Ayrshire.

Landmarks near West Kilbride

There is a railway station in West Kilbride itself: West Kilbride station. Nearby you will also find West Kilbride Museum (less than half a mile north-west) and Portencross Castle (1.9 miles west). Green spaces nearby include Stevenston Loch and Law Hill.

Map of West Kilbride © OpenStreetMap contributors

What we do, step by step

There’s not much you need to do on the day. Let us in and show us the room, and we’ll get on with it. Most visits take a few hours, tidy-up included. Around West Kilbride, access and parking are usually easy. Mention a lane, gate or long drive when you book and we will plan for it.

  1. First the standing area is cleaned and degreased.
  2. The area to be treated is masked out.
  3. We put on the clear non-slip coating.
  4. We lift the masking for a clean edge.
  5. We leave it to cure, normally overnight.

Preparing for the visit

  • Point us to the nearest place to park
  • Tell us about parking, stairs or access
  • Mention any earlier repairs or resurfacing

Ask for a price

Pricing is simple: take a close-up of the damage and a picture from further back, send them over with your postcode, and you’ll get a fixed price back. Quotes cost nothing and you’re under no obligation.

Get a fixed price

Related advice

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.