Essex · England

Non-slip bath & shower coating in West Mersea, Essex

We travel to West Mersea for clear non-slip coatings for baths and shower trays. Nothing is taken out, and the work is guaranteed.

  • Worn-out textured areas
  • Resurfaced baths that are now too smooth
  • Bath mats that harbour mould or get forgotten
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted non-slip bath coating in West Mersea

About our non-slip bath coating in West Mersea

The coating is clear and textured, so it shows only as a slightly matt area where you stand. It’s popular with homes with older or less mobile people, holiday lets and families. If you are dealing with bath mats that harbour mould or get forgotten and safety for older or less mobile people, we can usually put it right, whatever the material.

All our work is covered by a one-year guarantee, wherever you are in Essex. Clean with a soft brush and a mild cleaner. Avoid scourers on the coating.

Area
West Mersea (CO5)
County
Essex
Guarantee
One year on every repair
Quotes
Free, fixed price from pictures
Phone
0345 017 0787
Page updated
23 October 2026
Stained shower tray resurfaced to clean white, before and after

Can I fix it myself?

Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is usually the cheaper route.

The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.

When a repair is not the answer

A repair is not always the answer, and we would rather say so up front. Repairs won’t solve:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

If in doubt, send photos and we will say what we think.

What we work on

  • Wet room floors (ask us)
  • Acrylic baths
  • Enamelled baths
  • Shower trays
  • Resurfaced baths

How we price non-slip bath coating

We price every job individually. The main factors are:

  • The material
  • Access to the area
  • How many areas need work
  • Whether it’s a chip, crack, burn or wear

We do not add extras on the day. The price we quote from your pictures is the price you pay, unless the damage turns out to be different, in which case we talk to you first.

Quotes from your photos

When you take your photos, these tips help us give you a firm price:

  • One picture of the whole bath or shower tray
  • Any details about the material
  • Any earlier repairs or coatings
  • A close-up of the damage, in focus

Getting a quote takes a couple of minutes: photograph the damage, then the entire bath or shower tray, include your postcode and send them over. You will get a fixed quote, not an estimate.

Why repair rather than replace?

Instead, you could go for replacing the bath or tray with a textured one, or a bath mat, which traps water and needs cleaning. A coating adds grip to the bath you have. A repair normally costs much less than people expect, especially compared with replacing and refitting. Photos let us give you the exact figure.

Why choose Surface Doctor in West Mersea

  • We leave the room as we found it
  • We’ll tell you if it’s not worth repairing
  • Everything repaired in place
  • Most jobs done in one visit

Take a look at our prices page.

What we’re called out for in West Mersea

Baths and trays are made smooth so they’re easy to clean, yet with soap and water on them they become slippery. Textured areas on older baths wear smooth too.

Typical reasons for a call-out include:

  • Worn-out textured areas
  • Safety for older or less mobile people
  • Resurfaced baths that are now too smooth
  • Bath mats that harbour mould or get forgotten

What your quote should include

  • Who turns up on the day
  • How changes to the job are handled
  • Is the price fixed, and does it include VAT?
  • The length of the guarantee and what it covers

How to compare quotes

What happens on the day

You do not need to empty the room. Everything we use comes in the van with us, put protection down and get going once we have agreed what we are doing. Most jobs take a few hours, and you can get on with other things while we’re there.

  1. We start by degreasing the area where you stand.
  2. We mask out the area to be treated.
  3. We apply the clear textured coating.
  4. We lift the masking for a clean edge.
  5. We leave it to cure, generally overnight.

Getting ready for the visit

  • Tell us if there are stairs or a lift
  • Move bottles, mats and clutter away from the area
  • Ensure the room can be ventilated

How to get a price

There’s no need for us to visit first. Nearly every job can be priced from photos: we need a close-up, a wider picture and your postcode, and we’ll reply with a fixed price.

Send photos for a quote

Related advice

Landlords, agents and businesses in West Mersea

Hotels, guest houses and holiday lets need rooms back in use quickly, so most of our work is done in a single visit. We can work around your bookings.

For anyone letting property in or around West Mersea, we will quote for several properties at once. Just send photos for each address and we will come back with a combined price.

About West Mersea

West Mersea is about 8 miles south of Colchester, in Essex. Customers in West Mersea get the same service as everywhere else we cover: a fixed quote from photos, and a technician at your door on the day. West Mersea is one of 644 towns and villages in Essex we cover. We work right across the region, from West Mersea to London (about 48 miles away).

Postcode districts we cover here: CO5. Streets in the area include High Street North, High Street and Church Road, all of which we cover. Being close to the B1025, West Mersea is easy for our technicians to reach. If you are just outside West Mersea, we cover Barrow Hill (1 mile north-east), East Mersea (3 miles east), Peldon (3 miles north-west), Little Wigborough (3 miles north-west) and Great Wigborough (3 miles north-west). Within a short drive, we also cover Colchester (8 miles north), Clacton-on-Sea (10 miles east), Maldon (11 miles west), Witham (12 miles west), Camulodunum (8 miles north) and Heybridge (10 miles west).

Near you in West Mersea

Locally, our jobs take us to homes close to Church of St Peter and St Paul, Mersea Island School and White Hart pub and the streets around them. Green spaces nearby include Ray Island.

Map of West Mersea © OpenStreetMap contributors

Your questions about non-slip bath coating in West Mersea

Do you work for landlords and businesses?

Yes. We work for landlords, agents, builders and businesses as well as homeowners in West Mersea.

It’s been repaired before. Can you still fix it?

Typically, yes. The old repair comes out first, so let us know about it.

Will there be a smell?

Some materials have a smell while they’re applied, so we ventilate the room. It clears as the materials cure.

Do you come to West Mersea?

Yes. We work across the UK and travel to West Mersea. Send pictures and we will quote, or call 0345 017 0787.

How soon can you come?

Your quote comes with available dates. Tell us if you need it done quickly.

Will you leave a mess?

Dust sheets and masking go down before we start, and tidy up before we leave.

What information do you need?

Send pictures through the quote form or call 0345 017 0787.

What happens if you find more damage?

If we find something the pictures didn’t show, we explain it first. You decide whether to go ahead.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.