West Sussex · England

Non-slip bath & shower coating in Westmeston, West Sussex

Clear non-slip coatings for baths and shower trays for homes and businesses in Westmeston and across West Sussex. Send pictures for a free, fixed quote.

  • Safety for older or less mobile people
  • Resurfaced baths that are now too smooth
  • Worn-out textured areas
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted non-slip bath coating in Westmeston

About Westmeston

Westmeston is about 4 miles south of Burgess Hill, in West Sussex. We work in every kind of home, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. Westmeston is one of 371 places in West Sussex we cover. Our jobs stretch from Westmeston to London (about 41 miles away).

Here we cover the BN6 postcode area. Neighbouring places we cover include Ditchling (1 mile north), Keymer (2 miles north-west), Clayton (2 miles west), Hassocks (2 miles north-west) and Hurst Wickham (3 miles north-west). We also work in nearby towns such as Crawley (14 miles north), Horsham (14 miles north-west), Worthing (14 miles south-west), Haywards Heath (6 miles north), Shoreham-by-Sea (9 miles south-west) and Lancing (11 miles south-west).

Near you in Westmeston

We visit homes around Downlands Community School, The Parish Church of St Martin and Ditchling (St Margaret's) Church of England Primary School, among other places. The nearest railway station is Hassocks station, about 2.1 miles north-west of the centre. Well-known places in the area include Clayton Castle (1.7 miles west) and The Dene Hospital (4.7 miles north-west). Open spaces near Westmeston include Ditchling Beacon and Ladies Mile.

Map of Westmeston © OpenStreetMap contributors

About our non-slip bath coating in Westmeston

The coating is clear and textured, so the bath looks much the same. It’s popular with older people, families and holiday lets. Typical jobs include a bath or tray that is slippery when wet and bath mats that harbour mould or get forgotten, in resurfaced baths, enamelled baths and shower trays.

The work is covered for a year after we finish. If anything is not right, ring us and we’ll sort it. Clean with a soft brush and a mild cleaner. Avoid scourers on the coating.

Where
Westmeston (BN6)
Region
West Sussex
Warranty
A year, on every repair
Quotes
Free and fixed, from your photos
Phone
0345 017 0787
Last updated
23 October 2026
Discoloured square shower tray restored with a new white finish

Work for landlords and builders

We’re used to working with agents and managing companies. Send the address, pictures and access details.

Landlords, letting agents and housing providers in Westmeston use us as well as homeowners. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.

Should I try a DIY kit first?

A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.

It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and then the old filler has to be removed first.

Your questions about non-slip bath coating in Westmeston

Which areas do you work in?

Across the UK, and that includes Westmeston. Our prices are the same everywhere.

How soon can you come?

That depends on our diary for your area. Send photos with your postcode and we will reply with the earliest dates.

Can I add another job to the visit?

Of course, and it usually saves money. Just add the extra items to your pictures and we will quote them together.

Will I see the coating?

Only slightly: the treated area looks slightly matt.

Do I have to be there?

Someone needs to let us in and show us the job. You do not need to watch us work.

How do I clean it?

Yes. Use a soft brush and a mild cleaner.

What happens if you find more damage?

If we find something the pictures didn’t show, we explain it first. The price only changes if you agree.

Is a repair better than a new one?

Generally, yes. A repair skips the removal, fitting and redecorating. We’ll be honest if it’s not worth it.

What non-slip bath coating costs

You will not pay by the hour. The price depends on:

  • Whether old repairs or coatings need taking off
  • Where the damage is and how we get to it
  • Whether it’s a chip, crack, burn or wear
  • Unusual colours or finishes

What it costs depends on how much damage there is and what kind, the material and how many jobs we combine into one visit. We give a fixed quote from your photos, so you know the cost before booking.

Getting a price from pictures

Most quotes are done from pictures alone. To make it quick:

  • A wider photo showing the whole bath or shower tray
  • What it’s made of, if you know
  • Something in shot to show the size
  • Daylight if possible, and no flash reflection

Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the entire bath or shower tray, we can give you a fixed price.

When we would advise against a repair

We’d rather lose a job than do one that will not last, so these are the limits:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

Not sure? Send photos and we will give you a straight answer.

What we work on

  • Acrylic baths
  • Resurfaced baths
  • Wet room floors (ask us)
  • Enamelled baths
  • Shower trays

Repair or replace: which is better?

Instead, you could go for a new textured bath or tray, or relying on a mat that needs lifting and cleaning. A coating treats your existing bath or tray. The price reflects the work involved, not where you live. The full price is agreed before booking, with no extras added later.

What you get with us

  • Straight answers about what a repair can do
  • A year’s guarantee on all work
  • Repair technicians who travel to you, UK-wide
  • One visit for most repairs

Read our pricing.

What we do, step by step

Nothing needs to be moved out of the room. Everything we use comes in the van with us, lay protective sheets and start once you are happy with the plan. It typically takes a few hours, and you’re welcome to carry on with your day while we work.

  1. First the standing area is cleaned and degreased.
  2. We mask out the area to be treated.
  3. We put on the clear non-slip coating.
  4. The masking comes off to leave a neat edge.
  5. Once it has cured, normally overnight, it’s ready.

Preparing for the visit

  • Keep a parking space free if you can
  • Keep pets and children out of the room while we work
  • Clear toiletries, mats and anything else from around the area

Getting a price

The quickest way to a price is to send a couple of photos through our quote form or ring us. We will tell you honestly whether it can be repaired.

Send photos for a quote

Related advice

When to call us in Westmeston

Baths and trays are made smooth so they’re easy to clean, yet with soap and water on them they become slippery. The textured patch on an older bath also wears down over time.

Keep an eye out for any of the following:

  • Safety for older or less mobile people
  • A bath or tray that is slippery when wet
  • Resurfaced baths that are now too smooth
  • Bath mats that harbour mould or get forgotten

What to look for in a quote

  • If travel is included in the price
  • When it can be used again
  • How the colour is matched
  • Whether cleaning and preparation are in the price

Choosing a repair company

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.