Nottinghamshire · England

Non-slip bath & shower coating in White Post, Nottinghamshire

Clear non-slip coatings for baths and shower trays at your home in White Post, with a one-year guarantee on every repair.

  • Worn-out textured areas
  • A bath or tray that is slippery when wet
  • Safety for older or less mobile people
Surface Doctor technician refinishing the outside of a roll-top bath

Non-slip bath coating in White Post

Can I fix it myself?

A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.

If you are set on a kit, follow its instructions closely, make sure the area is clean and completely dry, and don’t use it until it has fully cured. If it doesn’t work out, we can still repair it properly.

Non-slip bath coating in White Post, done in place

It’s popular with homes with older or less mobile people, holiday lets and families. The coating is clear and textured, so it shows only as a slightly matt area where you stand. We’re often asked to fix a bath or tray that is slippery when wet and bath mats that harbour mould or get forgotten, on shower trays, wet room floors (ask us) and acrylic baths.

Big or small, it’s backed by a one-year guarantee. Clean with a soft brush and a mild cleaner. Do not use abrasive pads on the textured area.

Area
White Post (NG22)
County
Nottinghamshire
Cover
A year, on every repair
Price
Free and fixed, from your pictures
Telephone
0345 017 0787
Updated
23 October 2026
Before and after: an old shower tray refinished by Surface Doctor

FAQs for White Post

Will it make a mess?

Very little mess: we sheet and mask everything nearby, and we take our waste away with us.

What happens next?

We look at the pictures and reply with a fixed quote and some dates. If anything’s unclear, we’ll ask for another photo.

Is there any odour?

There can be some smell while we work, so we ventilate the room. It fades as everything cures.

Is the work guaranteed?

Yes, for a year. If there’s a problem with the work in that time, we come back and put it right.

Can you repair something that is been repaired before?

In most cases. We remove the old repair before doing a new one, so mention it when you send pictures.

Are you a vetted contractor?

Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.

Does someone need to be in?

Someone needs to let us in and show us the job. After that, you can carry on with your day.

Can tenants book a repair?

Yes, but check with your landlord or agent first. Many landlords are happy for a repair to be arranged before the end of a tenancy.

What we cannot put right

We’d rather lose a job than do one that will not last, so these are the limits:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

Send us photos and we will tell you honestly before you book.

Materials we work on in White Post

  • Shower trays
  • Wet room floors (ask us)
  • Acrylic baths
  • Resurfaced baths
  • Enamelled baths

White Post and nearby

White Post is about 5 miles south-east of Forest Town, in Nottinghamshire. Our technicians come to homes and businesses in White Post, so there is no workshop to go to. We work in 329 places across Nottinghamshire, from the larger towns to small villages. Our jobs stretch from White Post to Leeds (52 miles away).

We cover every part of NG22. Whether you live on Mansfield Road and Old Rufford Road or a nearby road, a technician can come to you. Close by, we cover Farnsfield (1 mile east), Bilsthorpe Moor (2 miles north-east), Bilsthorpe (3 miles north-east), Rufford (5 miles north) and Edwinstowe (6 miles north). We also work in nearby towns such as Mansfield (6 miles north-west), Beeston (14 miles south-west), Carlton (9 miles south), Worksop (15 miles north), Sutton in Ashfield (8 miles west) and Hucknall (8 miles south-west).

What’s near White Post

In White Post, that means homes near The White Post pub, St Michael's Church and The Joseph Whitaker School and the streets around them.

Map of White Post © OpenStreetMap contributors

What we do, step by step

On the day, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. The job usually takes a morning or an afternoon. We tidy up before we leave and tell you when it’s ready to use.

  1. We start by degreasing the area where you stand.
  2. We mask out the area to be treated.
  3. The clear textured coating is applied.
  4. We lift the masking for a clean edge.
  5. We leave it to cure, usually overnight.

How to prepare

  • Let us know about parking or access
  • Open a window if you can
  • Point us to the nearest place to park

How to get a price

Most customers in White Post get their price from pictures. Tell us what happened and where you are, and we will reply with a fixed quote and the earliest dates we have.

Send photos for a quote

Read more

Do you need non-slip bath coating in White Post?

Smooth surfaces are easy to clean, yet with soap and water on them they become slippery. The textured patch on an older bath also wears down over time.

The things clients typically mention when they call include:

  • Worn-out textured areas
  • A bath or tray that is slippery when wet
  • Resurfaced baths that are now too smooth
  • Safety for older or less mobile people

What your quote should include

  • What prep work is covered
  • What happens if they find more damage
  • When it can be used again
  • Is the price fixed, and does it include VAT?

10 questions to ask before you book

Prices and what affects them

Each job gets its own fixed quote. This is what makes a difference:

  • The colour and finish to match
  • Where the damage is and how we get to it
  • How much damage there is
  • How many items we do on one visit

Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Send photos and we will give you the exact figure.

How to get a fixed quote

Two or three clear photos are usually enough. Try to include:

  • What it’s made of, if you know
  • A coin beside the damage so we can judge size
  • One sharp close-up of the damage
  • Good light, ideally daylight, without flash glare

Getting a price is easy: snap the damage close up and then the whole item, send them over with your postcode, and you will get a fixed price back. Quotes are free and you are under no obligation.

Work for landlords and builders

We regularly price jobs from inventory or check-out photos. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.

We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.

Should you replace it?

The alternatives are replacing the bath or tray with a textured one, or relying on a mat, which traps water and needs cleaning. A coating treats your existing bath or tray. The price depends on the type and amount of damage, what it’s made of and how many jobs we combine into one visit. You get a fixed quote from your pictures, so you know the cost before you book.

Why book with us

  • Same prices wherever you are
  • A fixed quote before booking
  • Dust sheets down, tidy finish
  • Honest advice, even when it means no job

Take a look at our prices page.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.