Nottinghamshire · England

Non-slip bath & shower coating in Edwinstowe, Nottinghamshire

Clear non-slip coatings for baths and shower trays in Edwinstowe, carried out at your home and guaranteed for a year.

  • Bath mats that harbour mould or get forgotten
  • Worn-out textured areas
  • A bath or tray that is slippery when wet
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted non-slip bath coating in Edwinstowe

Non-slip bath coating at your home in Edwinstowe

It suits older people, families and holiday lets. It’s a clear, textured coating, so it shows only as a slightly matt area where you stand. If you’re dealing with resurfaced baths that are now too smooth and bath mats that harbour mould or get forgotten, we can generally put it right, whatever the material.

All our work is covered by our one-year guarantee. Clean with a soft brush and a mild cleaner. Don’t use abrasive pads on the textured area.

Area
Edwinstowe (NG21)
County
Nottinghamshire
Guarantee
One year on every repair
Quotes
Free and fixed, from your pictures
Call
0345 017 0787
Last updated
23 October 2026
Before and after: an old shower tray refinished by Surface Doctor

About Edwinstowe

Edwinstowe is about 5 miles north-east of Forest Town, in Nottinghamshire. Clients in Edwinstowe get the same service as everywhere else we cover: a fixed quote from pictures, then a visit to do the work. Edwinstowe is one of 329 towns and villages in Nottinghamshire where we work. Our jobs stretch from Edwinstowe to Leeds (47 miles away).

Postcode districts we cover here: NG21. Streets in the area include High Street, East Lane and Tattersall Close. We also cover the places around Edwinstowe: Rufford (2 miles south-east), Ollerton (2 miles east), Bilsthorpe (4 miles south), Bilsthorpe Moor (5 miles south) and White Post (6 miles south). Further out, we also cover Mansfield (6 miles south-west), Carlton (15 miles south), Worksop (9 miles north), Sutton in Ashfield (9 miles south-west), Hucknall (13 miles south-west) and Newark-on-Trent (14 miles south-east).

Landmarks near Edwinstowe

Locally, our jobs take us to homes close to The Rufford School, St Mary's Church and Edwinstowe CofE Primary School. Further afield, we also cover the area around Royal Lancers and Nottinghamshire Yeomanry Museum (3 miles north) and Budby Castle (2.1 miles north). Green spaces nearby include Budby South Forest RSPB reserve.

Map of Edwinstowe © OpenStreetMap contributors

Repairing versus replacing in Edwinstowe

The alternatives are replacing the bath or tray with a textured one, or a bath mat, which traps water and needs cleaning. A non-slip coating adds grip to the bath you have. It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Send photos and you will get a fixed figure.

Why choose Surface Doctor in Edwinstowe

  • We leave the room as we found it
  • One visit for most repairs
  • Fixed prices from your photos
  • Everything repaired in place

Take a look at our prices page.

For landlords and businesses

For developers and builders, we fix damage before handover. Several plots can be done in one visit to keep costs down.

We work for landlords, letting agents and housing providers in Edwinstowe as well as homeowners. Repairing between tenancies keeps void periods short, and it generally costs far less than a refit.

DIY repairs versus a professional job

If you’ve already tried a DIY fix, that’s fine. We take the old repair out and do it properly, so it will not stop us repairing it. It does add a little time, so tell us about it when you send photos.

What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.

What non-slip bath coating costs

We price every job individually. What matters most is:

  • The size and number of damaged areas
  • Whether it’s a chip, crack, burn or wear
  • Doing more than one item at once
  • The material and finish

Instead of hourly rates, we fix the price before we start. Damage, material and access decide it, and doing several items at once reduces it.

Send pictures for a quote

A couple of clear pictures is all it takes. Try to include:

  • A coin beside the damage so we can judge size
  • What it’s made of, if you know
  • A wider photo showing the entire bath or shower tray
  • Where you are, by postcode

For most jobs, pictures are all we need to give you a price. Tell us what happened and where you are, and we’ll send back a fixed quote and some dates.

What we can’t put right

We would rather lose a job than do one that will not last, so here’s what a repair cannot put right:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

If in doubt, send pictures and we will say what we think.

Materials we work on in Edwinstowe

  • Shower trays
  • Wet room floors (ask us)
  • Acrylic baths
  • Enamelled baths
  • Resurfaced baths

Your questions about non-slip bath coating in Edwinstowe

When can you do it?

We will give you dates with your quote. Tell us if you need it done quickly.

How do I book?

Just pictures, your postcode and a contact number. On the day, we only need access to the room.

Is it safe with children and pets around?

Just keep them out of the work area. We will let you know when it’s safe to use again.

Will the price change on the day?

We stop, show you and agree any change before carrying on. You won’t be charged for anything you haven’t agreed.

Which areas do you work in?

All of Nottinghamshire, and the rest of the UK. Travel is included in the price.

Is it worth repairing rather than replacing?

Normally, when the rest is in good condition. A repair avoids removal and making good. If replacing would be better, we’ll say so.

I rent my home. Can I book you?

Yes, but check with your landlord or agent first. Landlords are frequently glad to have it sorted.

Do I have to be there?

Yes. The technician needs access to the room for the visit, at a time that suits you.

What we do, step by step

When we visit, we arrive at the time we’ve agreed, cover the area with dust sheets and masking, and set to work. The job usually takes a few hours. We tidy up before we leave and let you know when you can use it again.

  1. We clean and degrease the standing area.
  2. The area to be treated is masked out.
  3. We apply the clear textured coating.
  4. We remove the masking for a neat edge.
  5. We leave it to cure, usually overnight.

Preparing for the visit

  • Let us know about parking or access
  • Ensure the area is dry
  • Tell us if there are stairs or a lift

Get a quote

We price from photos so you don’t have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we will come back with a fixed figure.

Send photos for a quote

Related advice

Do you need non-slip bath coating in Edwinstowe?

Smooth surfaces are easy to clean, yet with soap and water on them they become slippery. Textured areas on older baths wear smooth too.

The things customers generally mention when they call include:

  • Worn-out textured areas
  • Resurfaced baths that are now too smooth
  • A bath or tray that is slippery when wet
  • Bath mats that harbour mould or get forgotten

Before you book anyone

  • What prep work is covered
  • Whether the price covers travel
  • How the room is protected while they work
  • What happens if they find more damage

10 questions to ask before you book

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.