Warrington · England
Non-Slip Bath Coating for Wigshaw homes
Non-slip bath coating in Wigshaw without the cost of replacing. Get a fixed quote from your pictures, then we come to you.
- Resurfaced baths that are now too smooth
- Worn-out textured areas
- A bath or tray that is slippery when wet

How we handle non-slip bath coating in Wigshaw
It’s popular with older people, families and holiday lets. The coating is clear and textured, so it shows only as a slightly matt area where you stand. We’re frequently asked to fix resurfaced baths that are now too smooth and safety for older or less mobile people, in resurfaced baths, shower trays and wet room floors (ask us).
Peace of mind is built in: each job carries a one-year guarantee, and we’ll explain exactly what it covers when we quote. A soft brush and mild cleaner keep it clean. Don’t use abrasive pads on the textured area.

- Where
- Wigshaw (WA3)
- Region
- Warrington
- Warranty
- One year on every repair
- Quote
- Fixed and free, based on photos
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
DIY kit or professional repair?
A DIY attempt isn’t a disaster. We remove the old filler and start again, so it does not stop a professional repair. Just mention it when you send pictures, as it can add time.
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
Covering Wigshaw
Wigshaw is about 3 miles south-east of Golborne, in Warrington. Anywhere in WA3, we carry out the work at your property. We work in 72 places across Warrington. You can also see our page for Manchester, about 13 miles away.
Postcode districts we cover here: WA3. We regularly work on streets such as Robins Lane and Wigshaw Lane and the roads around them. We also travel to Culcheth (1 mile north-east), Little Town (1 mile south-west), New Lane End (1 mile west), Diggle Green (1 mile north) and Croft (1 mile south-west). Within a short drive, we also cover Warrington (4 miles south-west), Golborne (3 miles north-west), Lymm (5 miles south-east), Fearnhead (3 miles south-west), Wilderspool (5 miles south-west) and Orford (4 miles south-west).
What’s near Wigshaw
Locally, our jobs take us to homes close to Church of St Lewis, Culcheth Linear Park and Thai Paragon pub. Also close by are Newchurch Community Primary School (less than half a mile east) and Culcheth High School (1.1 miles north-east). The nearest railway station is Birchwood station, about 2.5 miles south of the centre. A little further out are Winwick Hospital (3.3 miles south-west) and Wigan and Leigh Exhibition (3.4 miles north). Open spaces near Wigshaw include Highfield Moss and Pennington Flash.
- Other local spots include Lowton East (2.1 miles north-west)
Your questions about non-slip bath coating in Wigshaw
It’s been repaired before. Can you still fix it?
In most cases. The old repair comes out first.
Do you work for landlords and businesses?
Yes, often. We quote for multiple addresses and fit around tenancy changeovers.
How much does non-slip bath coating cost in Wigshaw?
Every job gets a fixed price based on pictures of the damage. Send a close-up of the damage and a wider photo and your postcode.
How do I clean it?
Yes. A soft brush and mild cleaner is all it needs.
Will a non-slip coating change how my bath looks?
Very little: it shows as a matt area where you stand.
Do the materials smell?
It depends on the job, but frequently a little. Open windows and an extractor fan help, and it soon fades.
Is a repair better than a new one?
Typically, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. We’ll tell you honestly if replacement makes more sense.
Can you price it without visiting?
Usually, yes. Clear pictures let us give you a fixed price without visiting.
Common problems we fix in Wigshaw
Smooth surfaces are easy to clean, but wet, soapy surfaces are slippery. Textured areas on older baths wear smooth too.
You may need us if you’ve spotted:
- Worn-out textured areas
- Safety for older or less mobile people
- A bath or tray that is slippery when wet
- Resurfaced baths that are now too smooth
Comparing quotes
- Aftercare advice
- What prep work is covered
- How soon you can use it again
- Is the price fixed, and does it include VAT?
How it works
A typical visit goes like this: we arrive on time, protect everything around the work area, carry out the work and clear up. Plan for a morning or an afternoon. Before leaving, we tell you how long to leave it and how to look after it.
- First the standing area is cleaned and degreased.
- Next we mask off the area.
- We put on the clear non-slip coating.
- The masking comes off to leave a neat edge.
- Once it has cured, normally overnight, it’s ready.
Before we arrive
- Mention if the room is upstairs or in a flat
- Let the surface dry out before the visit
- Clear the area around the damage
Getting a price
The quickest way to a price is to send two or three pictures using our quote form or ring us. We will tell you honestly if a repair is the right fix.
Advice
Also near Wigshaw
What else we do in Wigshaw
What affects the price in Wigshaw
Prices are worked out job by job, from your pictures. The main factors are:
- The size and number of damaged areas
- Any earlier repairs that need removing first
- Unusual colours or finishes
- How easy the damage is to reach
There are no surprise extras on the day. The price we quote from your pictures is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
Getting a price from photos
Two or three clear photos are normally enough. Try to include:
- Any details about the material
- Daylight if possible, and no flash reflection
- A coin beside the damage so we can judge size
- Any earlier repairs or coatings
Email us a photo of the damage and a wider shot of the entire item, with your WA3 postcode, and we’ll come back with a fixed quote.
When we’d advise against a repair
It helps to know what we can’t do:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
Send us photos and we will tell you honestly.
Materials we work on in Wigshaw
- Resurfaced baths
- Enamelled baths
- Shower trays
- Acrylic baths
- Wet room floors (ask us)
Landlords, agents and businesses in Wigshaw
For anyone letting property in or around Wigshaw, we can repair and quote for several addresses together. Send photos for each one and we will price them together.
Rented homes see more wear and tear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
Why repair rather than replace?
The alternatives are a new textured bath or tray, or relying on a mat, which traps water and needs cleaning. A non-slip coating adds grip to the bath you have. What it costs depends on the type and amount of damage, what it’s made of and how many jobs we combine into one visit. You get a fixed price from your pictures, so you know the cost before booking.
What you get with us
- CHAS and Constructionline accredited
- Rooms protected and left tidy
- No need to remove anything
- Fixed prices from your pictures
See our pricing.
About our accreditations · Every repair comes with a one-year guarantee.

